Gates Motors
-
KT-SLEVO600
KT-SLEVO600- KIT IRREVERSIBLE GEAR MOTOR FOR SLIDING GATES 230V
KT SLEVO600 / KT-SLEVO 600 SELF-LOCKING SLIDING GATE MOTOR 230V 600Kg
For residential/industrial sliding gates up to 600kg. Complete with
encoder, magnetic limits, electronic brake and a built-in control unit.
Constant performance over time and in any condition thanks to reduced
wear&tear and the possibility to maintain the oil at the ideal temperature
(in the versions SLEVO800 and SLEVO1200) using HOT (optional).The appliance is fitted with a safe and secure key-operated manual
release system protected by a plastic access door.
ELECTROMECHANICAL GEAR MOTOR POWERED BY 230V
Grease lubrication. For gates up to 600kg.KT SLEVO600 USING
The kit KT SLEVO600 contains all the command, control and safety devices required
to carry out a residential installation for medium to small size sliding
gates with a maximum weight of 600kg.€410,00€486,00+ TAXKT-SLEVO600
€410,00€486,00+ TAX -
KT-SLX624 KIT
KT-SLX624 – KIT IRREVERSIBLE GEAR MOTOR FOR SLIDING GATES 24V
KT-SLX624 – KIT COMPLETE IRREVERSIBLE MOTOR GEARMOTOR 24V FOR SLIDING GATES 600Kg
KT-SLX624 -GEARMOTOR MOTOR 24V FOR SLIDING GATES UP TO 600Kg
Electromechanical gearmotor ideal for residential sliding gates.
Complete with encoder, magnetic limits and advanced built-in control unit.The automation KT-SLX624 24V motor is made up of self-locking gearmotor controlled by
encoder and magnetic travel limits with an in-built:
– electronic programmer;
– motor speed regulation;
– motor drive power regulation;
– double 8,2kΩ inputs for connecting safety edges;
– slot-in open collector receiver card.The programmer of KT-SLX624CB allows you to rapidly set the system parameters
including: the sequential button mode, automatic reclosing, warning
lamp pre-flashing, flashing warning lamp activation, indicator light and
photoelectric cell function setting etc.KT-SLX624 USING
The kit contains all the command, control and safety devices required
to carry out a residential installation for medium to small size sliding
gates with a maximum weight of 600kg.
SLX624CB 24V is Ideal for residential sliding gates up to 600kg.
The appliance is fitted with a safe and secure key-operated manual
release system protected by a plastic access door.KT-SLX624 KIT COMPLETE
SX624 : SELF-LOCKING SLIDING GATE MOTOR
with an encoder-controlled 24Vdc motor and magnetic travel limits.
In-built electronic programmer.
N. 1 2-CHANNEL RECEIVER CARD
433MHz open collector, slot-in card. S508 – S449 – S486 – FM – EDGE and
N. 2 TXQ504C4 : 4-CHANNEL TRANSMITTERS
433MHz FM ROLLING CODE.
N. 1 CDR999 : PAIR OF SURFACE-MOUNT PHOTOELECTRIC CELLS
with adjustable lens, range 10m.
N. 1 ICON : LED WARNING LIGHT
24V – 230V with an in-built aerial
N. 1 TARGA-INT : INTERNATIONAL WARNING SIGN
in PP, multi-language.€485,00 + TAXKT-SLX624 KIT
€485,00 + TAX -
KT-SLX624CB KIT
KT-SLX624CB – KIT IRREVERSIBLE GEAR MOTOR FOR SLIDING GATES 24V
KT-SLX624CB – KIT COMPLETE IRREVERSIBLE MOTOR GEARMOTOR 24V FOR SLIDING GATES 600Kg
KT-SLX624CB / KT-SLX624 CB -GEARMOTOR MOTOR 24V FOR SLIDING GATES UP TO 600Kg
Electromechanical gearmotor ideal for residential sliding gates.
Complete with encoder, magnetic limits and advanced built-in control unit.The automation KT-SLX624CB 24V motor is made up of self-locking gearmotor controlled by
encoder and magnetic travel limits with an in-built:
– electronic programmer;
– motor speed regulation;
– motor drive power regulation;
– double 8,2kΩ inputs for connecting safety edges;
– slot-in open collector receiver card.The programmer of KT-SLX624CB allows you to rapidly set the system parameters
including: the sequential button mode, automatic reclosing, warning
lamp pre-flashing, flashing warning lamp activation, indicator light and
photoelectric cell function setting etc.KT-SLX624CB USING
The kit contains all the command, control and safety devices required
to carry out a residential installation for medium to small size sliding
gates with a maximum weight of 600kg.
SLX624CB 24V is Ideal for residential sliding gates up to 600kg.
The appliance is fitted with a safe and secure key-operated manual
release system protected by a plastic access door.KT-SLX624CB KIT COMPLETE
SX624CB : SELF-LOCKING SLIDING GATE MOTOR
with an encoder-controlled 24Vdc motor and magnetic travel limits.
In-built electronic programmer.
N. 1 RSQ504OC2 : 2-CHANNEL RECEIVER CARD
433MHz open collector, slot-in card. S508 – S449 – S486 – FM – EDGE and
NOIRE versions are available on request.
N. 2 TXQ504C4 : 4-CHANNEL TRANSMITTERS
433MHz FM ROLLING CODE.
N. 1 CDR999 : PAIR OF SURFACE-MOUNT PHOTOELECTRIC CELLS
with adjustable lens, range 10m.
N. 1 ICON : LED WARNING LIGHT
24V – 230V with an in-built aerial
N. 1 TARGA-INT : INTERNATIONAL WARNING SIGN
in PP, multi-language.€545,00 + TAXKT-SLX624CB KIT
€545,00 + TAX -
MOLE
MOLE / MOLE24 – UNDERGROUND ACTUATOR 24V FOR SWING GATES
MOLE24 – SELF-LOCKING MOTOR IN PHASE OUT
REPLACED BY NEW MOTOR : HLXCORE24 MOTORMOLE 24 / MOLE24 – UNDERGROUND ACTUATOR 230V FOR SWING GATES
Underground gearmotor MOLE 224 V ideal for swing gates up to 3 meters.
Compatible with CAME embedding cases and old ROCK 24 motor with ROCK2HL adaptation kit.
Complete with encoder and easy release for manual operation it is safe, practical and reliable.
Safe and Precise thanks to the encoder and the slowing down in opening and closing
Practical thanks to the control unit with plug-in receiver and self-learning function.
Adjustable mechanical limits in the foundation box.
Reliable thanks to the sturdy mechanical parts and the powerful motor in perfectly water
resistant aluminum shells.MOLE 24
230 V electromechanical underground gearmotor, for leafs up to 3 m.
It replaces the old model TELCOMA ROCK 24 V
Compatible with CAME EMBEDDING CASES
Compatible with old ROCK TELCOMA embedding cases with KIT-ROCK2HL adaptation kit -
MOLE 230
MOLE 230 / MOLE230 – UNDERGROUND ACTUATOR 230V FOR SWING GATES
MOLE230 – SELF-LOCKING MOTOR IN PHASE OUT
REPLACED BY NEW MODEL : HLXCORE230 MOTORMOLE 230 / MOLE230 – UNDERGROUND ACTUATOR 230V FOR SWING GATES
Underground gearmotor MOLE 230 V ideal for swing gates up to 3 meters.
Compatible with CAME embedding cases and old ROCK230 motor with ROCK2HL adaptation kit.
Complete with encoder and easy release for manual operation it is safe, practical and reliable.
Safe and Precise thanks to the encoder and the slowing down in opening and closing
Practical thanks to the control unit with plug-in receiver and self-learning function.
Adjustable mechanical limits in the foundation box.
Reliable thanks to the sturdy mechanical parts and the powerful motor in perfectly water
resistant aluminum shells.MOLE 230
230 V electromechanical underground gearmotor, for leafs up to 3 m.
It replaces the old model TELCOMA ROCK230 V
Compatible with CAME EMBEDDING CASES
Compatible with old ROCK TELCOMA embedding cases with KIT-ROCK2HL adaptation kit -
PARKLINE
PARKLINE – PARKING SPACE PROTECTION WITH A 12V MOTOR
PARKLINE – DOMOPARK230 CARDIN PARKING SPACE PROTECTION WITH A 24V MOTOR
The automation system consists of the PARKLINE parking space protection plus:
– electronic programmer;
– built-in S504 receiver “433MHz” FM ROLLING CODE;
– one S504 pre-coded two-channel transmitter;
– buffer batteries.
Parking space protection with external battery charger powered from the mains or battery.
The built-in control unit controls the battery charge so as to guarantee continuity of operation even
without a power supply.
Parkline can operate up to 4 months without being connected to a mains power supply.€875,00 + TAXPARKLINE
€875,00 + TAX -
PARKSUN
PARKSUN – PARKING SPACE PROTECTION WITH A 12V MOTOR
PARKSUN – DOMOPARKE PARKING SPACE PROTECTION WITH A 12V MOTOR
The automation system consists of the PARKSUN parking space protection plus:
– electronic programmer;
– solar panel;
– built-in S504 receiver “433MHz” FM ROLLING CODE;
– one S504 pre-coded two-channel transmitter;
– buffer batteries;
– vehicle presence detector (only Parksun-s).
The PARKSUN parking safe protection DOMOPARKE, self-powered with built-in photovoltaic
panel, can be installed anywhere as it needs no power cable.
The built-in control unit controls the photovoltaic panel and the
battery to ensure maximum energy efficiency and continuity of
operation. Even with no light whatsoever Parksun can operate for
up to 4 months.€957,00 + TAXPARKSUN
€957,00 + TAX -
PARKSUN-S
PARKSUN-S – PARKING SPACE PROTECTION WITH A 12V MOTOR WITH VEICLE PRESENCE DETECTOR
PARKSUN-S – PARKING SPACE SAFE WITH A 12V MOTOR WITH VEICLE PRESENCE DETECTOR
The automation system consists of the PARKSUN parking space protection plus:
– electronic programmer;
– solar panel;
– built-in S504 receiver “433MHz” FM ROLLING CODE;
– one S504 pre-coded two-channel transmitter;
– buffer batteries;
– vehicle presence detector (only Parksun-s).
The PARKSUN-S parking safe protection, self-powered with built-in photovoltaic
panel, can be installed anywhere as it needs no power cable.
The built-in control unit controls the photovoltaic panel and the
battery to ensure maximum energy efficiency and continuity of
operation. Even with no light whatsoever Parksun can operate for
up to 4 months.PARKSUN-S
vehicle presence detector (only Parksun-s).€1.047,00 + TAXPARKSUN-S
€1.047,00 + TAX -
RAP4E
RAP4E – ELECTROMECHANICAL BARRIERS UP TO 4 M
RAP4E – ELECTROMECHANICAL BARRIER UP TO 4 M
Electromechanical RAP 4E barrier 24 V, with cataphoretic treatment and painting.
With cataphoresis treatment and painting.
Complete with control unit and encoder.
Max boom length 4,25 m. Net span 4 m.
RAP 4E
This barrier has a perfect movement and can operate also in absence of power supply.
This feature thanks to the possibility of inserting 2 back up batteries.<<
Which could be placed in the dedicated housing.
A 24Vdc motor coupled with an encoder ensures perfect controlled boom movement.
The low voltage motor (24 Vdc) allows intensive use in all conditions.
Thanks to the built-in encoder, it provides a high degree of protection against crushing.€911,00 + TAXRAP4E
€911,00 + TAX -
ROCK – MOLE – KIT-ROCK2HL
ROCK230 HL251CL + KIT-ROCK2HL : UNDERGOUND GEARMOTOR 230V
ROCK 230 – DISCONTINUED PHASE OUT MOTOR
REPLASED BY KIT : HLXCORE230 + KIT-ROCK2HLROCK230 – HLXCORE230 + KIT-ROCK2HL : UNDERGOUND GEARMOTOR 230V
HL251CL 230 V underground electromechanical gearmotor .
Ideal for swing gates up to 3 meters.
Equipped with encoder and easy release.
The KIT replaces the discontinued phase out ROCK motor.
Safe thanks to the precision and sensitivity of the encoder and to the slowdowns in opening and closing.
Practical thanks to the control unit with quick connection and self-learning receiver.
Adjustable limit switches integrated in the case.
Reliable with perfect watertightness and solid and robust mechanics.ROCK230 -KIT-ROCK2HL + HLXCORE230 230V
HL251CL 230V underground electromechanical gearmotor for leaves up to 3 m.
Compatible with BOX ROCK foundation boxes or embedding ROCK CASE
using the adaptation kit : KIT-ROCK2HL€395,00 + TAXROCK – MOLE – KIT-ROCK2HL
€395,00 + TAX -
ROCK 230 – HLXCORE230 + KIT-ROCK2HL
ROCK230 – HLXCORE230 + KIT-ROCK2HL : UNDERGOUND GEARMOTOR 230V
ROCK 230 – DISCONTINUED PHASE OUT MOTOR
REPLASED BY KIT : HLXCORE230 + KIT-ROCK2HLROCK-230 – HLXCORE230 + KIT-ROCK2HL : UNDERGOUND GEARMOTOR 230V
HLXCORE230 230 V underground electromechanical gearmotor .
Ideal for swing gates up to 3 meters.
Equipped with encoder and easy release.
The KIT replaces the discontinued phase out ROCK motor.
Safe thanks to the precision and sensitivity of the encoder and to the slowdowns in opening and closing.
Practical thanks to the control unit with quick connection and self-learning receiver.
Adjustable limit switches integrated in the case.
Reliable with perfect watertightness and solid and robust mechanics.ROCK-230 -KIT-ROCK2HL + HLXCORE230 230V
HLXCORE230 230V underground electromechanical gearmotor for leaves up to 3 m.
Compatible with BOX ROCK foundation boxes or embedding ROCK CASE
using the adaptation kit : KIT-ROCK2HLHLXCORE230
ELECTROMECHANICAL OPERATOR HLXCORE230
– 230V MOTOR FOR GATES
– 110° MAXIMUM OPENING ANGLE
– GATE MAX 3M
– GATE MAX 550KG
230 V electromechanical underground gearmotor, for leafs up to 3 m.
It replaces the old model TELCOMA ROCK-230 V
Compatible with CAME EMBEDDING CASES
Compatible with old ROCK TELCOMA embedding cases with KIT-ROCK2HL adaptation kit€395,00 + TAXROCK 230 – HLXCORE230 + KIT-ROCK2HL
€395,00 + TAX -
ROCK 230 – KIT-ROCK2HL + HLXCORE230
ROCK230 : HLXCORE230 + KIT-ROCK2HL : UNDERGOUND GEARMOTOR 230V
ROCK 230 – DISCONTINUED PHASE OUT MOTOR
REPLASED BY KIT :ROCK230 HLXCORE230 + KIT-ROCK2HLROCK230 – HL251CL + KIT-ROCK2HL : UNDERGOUND GEARMOTOR 230V
HL251CL 230 V underground electromechanical gearmotor .
Ideal for swing gates up to 3 meters.
Equipped with encoder and easy release.
The KIT replaces the discontinued phase out ROCK motor.
Safe thanks to the precision and sensitivity of the encoder and to the slowdowns in opening and closing.
Practical thanks to the control unit with quick connection and self-learning receiver.
Adjustable limit switches integrated in the case.
Reliable with perfect watertightness and solid and robust mechanics.ROCK230 -KIT-ROCK2HL + HLXCORE230 230V
HLXCORE230 230V underground electromechanical gearmotor for leaves up to 3 m.
Compatible with BOX ROCK foundation boxes or embedding ROCK CASE
using the adaptation kit : KIT-ROCK2HL
