KT-SLX624 KIT

KT-SLX624 – KIT IRREVERSIBLE GEAR MOTOR FOR SLIDING GATES  24V

KT-SLX624 – KIT COMPLETE IRREVERSIBLE MOTOR  GEARMOTOR 24V FOR SLIDING GATES 600Kg

KT-SLX624 -GEARMOTOR  MOTOR 24V FOR SLIDING GATES UP TO 600Kg
Electromechanical gearmotor ideal for residential sliding gates.
Complete with encoder, magnetic limits and advanced built-in control unit.

The automation KT-SLX624 24V motor is made up of self-locking gearmotor controlled by
encoder and magnetic travel limits with an in-built:
– electronic programmer;
– motor speed regulation;
– motor drive power regulation;
– double 8,2kΩ inputs for connecting safety edges;
– slot-in open collector receiver card.

The programmer of KT-SLX624 allows you to rapidly set the system parameters
including: the sequential button mode, automatic reclosing, warning
lamp pre-flashing, flashing warning lamp activation, indicator light and
photoelectric cell function setting etc.

KT-SLX624 USING
The kit contains all the command, control and safety devices required
to carry out a residential installation for medium to small size sliding
gates with a maximum weight of 600kg.
SLX624CB 24V is Ideal for residential sliding gates up to 600kg.
The appliance is fitted with a safe and secure key-operated manual
release system protected by a plastic access door.

KT-SLX624 KIT COMPLETE

SX624 : SELF-LOCKING SLIDING GATE MOTOR
with an encoder-controlled 24Vdc motor and magnetic travel limits.
In-built electronic programmer.
N. 1 2-CHANNEL RECEIVER CARD
433MHz open collector, slot-in card. S508 – S449 – S486 – FM – EDGE and
N. 2 TXQ504C4 : 4-CHANNEL TRANSMITTERS
433MHz FM ROLLING CODE.
N. 1 CDR999 : PAIR OF SURFACE-MOUNT PHOTOELECTRIC CELLS
with adjustable lens, range 10m.
N. 1 ICON : LED WARNING LIGHT
24V – 230V with an in-built aerial
N. 1 TARGA-INT : INTERNATIONAL WARNING SIGN
in PP, multi-language.

SLX624 – ELECTROMECHANICAL UNIT WITH A 24V MOTOR

SLX624  AUTOMATION MOTOR- FAST SELF-LOCKING UNIT ENCODER 24V MAX. 500KG + NIMH BATTERIES FOR SLIDING GATES

The KT-SLX624  gearmotor for sliding automation gate is made up of a self-locking gear motor (with a gate
drag speed of 13 metres/minute) controlled by magnetic encoder with an in-built:
– electronic programmer;
– 433MHz FM receiver;
– reversible motor (SLX1024REV).

The electronic programmer is factory fitted with a graphic LCD display
(128 x 128 pixels) with backlighting in six different languages.
The menu allows you to rapidly set the system parameters including:
the sequential button mode, automatic reclosing, warning lamp
pre-flashing, intermittent warning lamp activation, indicator light and
photoelectric cell function setting etc.

The electronics card, thanks to the presence of the real-time clock,
allows you to set 10 events (shown on the display) and these events
permit you to regulate the opening and closing of the motor at
different times during the day within 3 weekly time bands (Mon-
Fri, Sat-Sun, Mon-Sun).

The events can be enabled or disabled (during holiday periods)
either from the menu or by means of a radio channel.
The appliance is fitted with a safe and secure manual
release system activated by a personalised key.

SLX624  AUTOMATION – ELECTROMECHANICAL GROUP WITH 24V

SLX624  motor automation  is a “complete machine” which contains all the electronic and mechanical
components required to manage gate positioning and the safety functions of the
installation.

Powerful and tireless, controlled by state of the art electronics, the
automation is fitted with a powerful direct current motor backed up by a finely
tuned double gear kinematic system which reduces the stress on the motor and
structure caused by the movement of heavy gates.

Installation is possible on any structure and the unit may be fitted both to the right
as well as to the left of the passageway.
Models are available for both residential and industrial use.
The use of low voltage motors increase the performance, guarantee high efficiency,
long life and silent running.

The integrated programmer allows encoder-controlled gate positioning and selfprogramming
thus reducing installation times to a minimum and optimising the programming procedure.

Repositioning takes place automatically whenever foreign objects get in the way of
the gate as it is moving. The electronic control unit is completed by the anti-crush
and “soft start” and “soft stop” functions.

Compatible with the system INTPRG-3G/WF that allows the system parameters to
be controlled and programmed remotely.
A slave motor, connected via cable with the Cardin MODCA slot-in modules
inserted, can be installed to drive two biparting sliding gates.

Multi-decoding:
The product range is factory fitted with a multi-decoding remote control module
(system S449 – S486 – S504 – S508), a battery charger and NiMH batteries
which allow the gate to be manoeuvred even during blackouts.

GENERAL CHARACTERISTICS SLX624  AUTOMATION

SLX624 Automation Power supply                    Vac 230
Frequency                                                           Hz 50
Nominal electrical input                                        A 0,9
Power input                                                         W 180
Duty cycle                                                           % 70
Drag speed                                                          m/min 13
Torque max.                                                         Nm 57
Operating temperature range                                 °C -20°…+55
Protection grade                                                   IP 44

SLX624 MOTOR DATA
Motor power supply                                              Vdc 24
Maximum power yield                                            W 130
Nominal electrical input                                         A 3,5

BUILT-IN RECEIVER CARD
Reception frequency                                              MHz 433.92 / 868,3
Channels                                                               No 4
Functions                                                              No 8
Stored codes                                                        No 300 / 1000

ACCESSORIES SLX624  AUTOMATION

GEAR RACK
in polyamide with a steel core for sliding gates up to 800kg.
CREMP : VERSION WITH 6 LOWER FASTENING SLITS
30mm x 20mm, M4, 1m pieces.
CRENY : VERSION WITH 6 UPPER FASTENING SLITS
30mm x 20mm, M4, 1m pieces.

GEAR RACK
in nylon reinforced with glass fibre with a steel core for sliding gate up to 500kg.
CRENY1 : VERSION WITH 4 LOWER FASTENING SLITS
30mm x 20mm, M4, 1m pieces.

GEAR RACK
in galvanised steel for the SLX824CB automation and industrial installations up to 3000 kg.
SLOAC : VERSION TO BE SOLDERED
22mm x 22mm, M4, 2m pieces.
SLOAC2 : VERSION WITH FASTENING SLITS
30mm x 12mm, M4, 1m pieces.

KBNIMH-1 : KIT BATTERY CHARGER + NIMH BATTERIES
Allows the SL524 unit to work during blackouts.

KBNIMH-D : KIT BATTERY CHARGER + NIMH BATTERIES
Allows the SLX824CB automation unit to work during blackouts.

SPEED CONTROLLER
The device should be fitted to the gear rack in alignment with the motor in
order to recuperate the correct sliding automation action of the gate in installations that
are slightly inclined.

BLUETOOTH MODULE
The module allows the exchange of information between the motor’s
electronic control unit and the Cardin 3G/WF interface via Bluetooth or
directly between the control units and the apps CRD ONE and CRD TWO.

DATA INTERFACE MODULE VIA CABLE
The module allows the exchange of information between the motor’s electronic
control unit and the Cardin 3G/WF interface and also allows you to connect
two motors via cable in order to use the synchronised master/slave function.