• CDR973AX PHOTOCELL

    CDR973AX – SURFACE MOUNTED PHOTOCELL WITH IP66 SHOCKPROOF CASE 15M RANGE

    CDR973AX – PHOTOELECTRIC CELLS IN AN ALUMINIUM CASE IP66
    Maximum range 15m
    Power supply 12/24Vac-dc
    Protection grade IP66
    Transmitter and receiver housed in a compact waterproof aluminium
    case. Highly resistant spray painting. Self locking adjustable lens
    which can be rotated horizontally through plus or minus 90° and
    vertically through plus or minus 30° with respect to the standard
    installation position.
    It is possible to connect up to 3 pairs of photocells and synchronize
    the transmission (multiplex system).

    CDR973AX – SURFACE-MOUNT PHOTOELECTRIC CELL
    The kit contains a pair of aluminium photoelectric cells with two
    pipe glands.

    CDR973AX PHOTOCELL

    102,00 + TAX
  • CDR973EX – PHOTPCELLS

    CDR973EX – SURFACE MOUNTED PHOTOCELL WITH IP55 SHOCKPROOF CASE 15M RANGE

    CDR973EX PHOTOCELL – PHOTOELECTRIC CELLS IN A SHOCKPROOF CASE IP55
    Maximum range 15m
    Power supply 12/24Vac-dc
    Protection grade IP55
    Transmitter and receiver housed in a waterproof plastic case.
    Self locking adjustable lens which can be rotated horizontally
    through plus or minus 90° and vertically through plus or minus 30°
    with respect to the standard installation position.
    It is possible to connect up to 3 pairs of photocells and synchronize
    the transmission (multiplex system).

    CDR973EX PHOTOCELL – SURFACE-MOUNT PHOTOELECTRIC CELLS
    The kit contains a pair of surface-mount photoelectric cells, 2 lens
    covers for surface-mount photocells and 2 fast-fitting wall brackets.

    CDR973EX – PHOTPCELLS

    64,00 + TAX
  • CDR973IX – PHOTOCELL

    CDR973IX – PHOTOCELL WITH IP55 SHOCKPROOF CASE 15M RANGE

    CDR973IX PHOTOCELL – PHOTOELECTRIC CELLS IN A SHOCKPROOF CASE IP55
    Maximum range 15m
    Power supply 12/24Vac-dc
    Protection grade IP55
    Transmitter and receiver housed in a waterproof plastic case.
    Self locking adjustable lens which can be rotated horizontally
    through plus or minus 90° and vertically through plus or minus 30°
    with respect to the standard installation position.
    It is possible to connect up to 3 pairs of photocells and synchronize
    the transmission (multiplex system).

    CDR973IX PHOTOCELL – FLUSH-FITTING PHOTOELECTRIC CELLS
    The kit contains a pair of flush-fitting photoelectric cells and 2 lens
    covers for flush-fitting photocells.

    CDR973IX – PHOTOCELL

    67,00 + TAX
  • CDR999 PHOTOCELL

    CDR999 – PHOTOCELL WITH  SURFACE MOUNT CASE
    IP55 RANGE 10M

    CDR999 PHOTOCELL – PHOTOELECTRIC OR PHOTOCELLS IN A SHOCKPROOF CASE IP55
    Maximum range 10m
    Power supply 12/24Vac-dc
    Protection grade IP55
    Transmitter and receiver housed in waterproof cases.
    Self locking adjustable lens which can be rotated horizontally
    through plus or minus 90° and vertically through plus or minus 30°
    with respect to the standard installation position.
    It is possible to connect up to 3 pairs of photocells and synchronize
    the transmission (multiplex system).
    Double relays on the receiver with digital control increase the security
    and safety level of the output part (the part that furnishes the at rest/
    alarm signal). Jumper for selecting the output contact mode (potential
    free or resistance 8, 2kΩ contacts).

    CDR999 PHOTOCELL – SURFACE-MOUNT PHOTOELECTRIC CELLS, RANGE MAX. 10m

    CDR999 PHOTOCELL

    51,00 + TAX
  • CDRREFLEX – REFLEX PHOTOCELL

    CDRREFLEX / CDR REFLEX – PHOTOCELL
    WITH 
    SURFACE MOUNT CASE IP55

    CDRREFLEX / CDR REFLEX – PHOTOCELL INFRARED BARRIERS PASSIVE REFLECTION PHOTOCELLS
    WITH ADJUSTABLE OPTICS

    CDRREFLEX / CDR REFLEX PHOTOELECTRIC PHOTOCELLS AND PASSIVE REFLECTION
    POWER SUPPLY 12/24Vac-dc
    Maximum range 10m.
    Overall dimensions 50 x 90 x 60.
    Shockproof container
    Reflex photocell with IP55 degree of protection
    Rotation range with respect to the standard position : ± 10°
    Optic mounted on self-friction joints, adjustable both horizontally and vertically

  • CDRX12 PHOTOCELL

    CDRX12 – PHOTOCELL WITH  SURFACE MOUNT CASE
    IP55 RANGE 10M

    CDRX12 PHOTOCELL – PHOTOELECTRIC OR PHOTOCELLS IN A SHOCKPROOF CASE IP55

    CDRX12 – HYBRID INFRARED BARRIERS PHOTOCELLS WITH ADJUSTABLE LENSES
    RECEIVER POWER SUPPLY 12/24Vac-dc
    PROJECTOR POWER SUPPLY 3V WITH A LITHIUM BATTERY
    MAXIMUM RANGE 10m
    PROTECTION GRADE IP55

    CDRX12 PHOTOCELLS are a next generation infrared safety system, particularly suited to the protection of passageways (traffic
    and pedestrian) that are fitted with automatic opening and closing systems. The electronic circuit respects the
    most up to date standards and regulations and conforms to the standard 3 of the UNI EN 13849-1 (update of the
    EN954-1). It is possible to connect up to 3 pairs of photocells and synchronise the transmission (multiplex system).
    The necessity of guaranteeing greater ambient noise immunity has led to the evolution of both the transmitter and
    receiver cards. The system is based on the criteria “resistance to single failure” that guarantees the maintenance of
    safety in case of electrical problems.
    The receiver should be installed close to the electronic programmer and wired up drawing its 12/24V power supply
    directly from the programmer while the projector can be installed on any surface and doesn’t require wiring. Power
    is supplied by a solar panel when light is present and by a 3V lithium battery when insufficient light is available.
    The batteries lifespan can be optimised by setting the energy saving function and varying the cut-in time and the
    installation distance between the two photoelectric cells.

    CDRX12 PHOTOCELL

    96,00 + TAX
  • CK160

    CK 160 / CK160 – SENSITIVE EDGE CK160 / CK 160

    CK 160  / CK160 – SENSITIVE EDGE CK160 / CK 160
    CK200 Resistive sensitive safty edge, according to the European standard EN 12978.

    The CK 160 has To be installed with CSSENSOR electronic card.
    length 160 cm, without caps.

    It is replaced by the new sensitive coasts:
    MECHANICAL ACCESSORIES – SENSITIVE SAFTY EDGE ( RIBS) CARDIN with CODES:
    NC8K2Lxxx
    BBASLxxN
    CPxxBL
    BSHxxLxx

  • CK200

    CK 200 / CK 200 – SENSITIVE EDGE CK200 / CK 200

    CK 200 / CK 200 – SENSITIVE EDGE CK200 / CK 200
    CK200 Resistive sensitive safty edge, according to the European standard EN 12978.

    The CK200 has To be installed with CSSENSOR electronic card.
    length 200 cm, without caps.

    It is replaced by the new sensitive coasts:
    MECHANICAL ACCESSORIES – SENSITIVE SAFTY EDGE ( RIBS) CARDIN with CODES:
    NC8K2Lxxx
    BBASLxxN
    CPxxBL
    BSHxxLxx

  • COP

    COP

    COP Wall cover for fixing the APRO / VEDO / PASSO series on a pre-existing installation.
    Pack of 2 pcs.

    COP

    17,00 + TAX
  • CP30BL – PASSIVE IMPACT EDGE

    CP30BL – PASSIVE IMPACT EDGE

    BP20BL – 2-METER PASSIVE IMPACT EDGE (PROFILE 70mm) – SAFETY DEVICES
    CP30BL – 3-METER PASSIVE IMPACT EDGE (PROFILE 30mm) – SAFETY DEVICES
    CP40BL – 4-METER PASSIVE IMPACT EDGE (PROFILE 30mm) – SAFETY DEVICES
    CP50BL – 5-METER PASSIVE IMPACT EDGE (PROFILE 30mm) – SAFETY DEVICES

    PASSIVE IMPACT EDGE  – PASSIVE AUXILIARY DEVICES FOR SWING AND SLIDING GATES
    High profile 70mm / low 30mm – colour black.

    Low profile / high profile passive edge

    Although it is not to be considered a safeties devices due to the absence of an electrical contact.
    he passive edge has the same dimensions and mechanical protective characteristics as
    the active safety edge and does supply valid absorption protection against impact. The
    low profile edge, which works as simple impact protection, is suitable for closing
    devices where passing room is limited.

    39,0063,00 + TAX

    CP30BL – PASSIVE IMPACT EDGE

    39,0063,00 + TAX
  • CPM

    CPM

    CPM Plastic container to be walled in, for ILB SINCRO and SELCH.

  • CRL170 MOTOR FOR ROLLING SHUTTERS

    CRL170 / CRL 170 – REVERSIBLE GEARED MOTOR FOR ROLLING SHUTTERS

    CRL170 / CRL 170 SHUTTERS – REVERSIBLE GEARED MOTOR FOR ROLLING SHUTTERS
    230V geared motor permitting a maximum lifting power of 180kg.
    An electric lock must be fitted to guarantee that the rolling shutter
    locks in the closed position.
    Precise and reliable, thanks to the integrated travel limits, this model
    may fitted to all types of rolling shutter with a 60mm or 48mm drive
    shaft diameter and a crown wheel diameter of 200mm e 220mm.
    Maximum rolling shutter height 6m.

Main Menu