CDR999 PHOTOCELL

CDR999 – PHOTOCELL WITH  SURFACE MOUNT CASE
IP55 RANGE 10M

CDR999 PHOTOCELL – PHOTOELECTRIC OR PHOTOCELLS IN A SHOCKPROOF CASE IP55
Maximum range 10m
Power supply 12/24Vac-dc
Protection grade IP55
Transmitter and receiver housed in waterproof cases.
Self locking adjustable lens which can be rotated horizontally
through plus or minus 90° and vertically through plus or minus 30°
with respect to the standard installation position.
It is possible to connect up to 3 pairs of photocells and synchronize
the transmission (multiplex system).
Double relays on the receiver with digital control increase the security
and safety level of the output part (the part that furnishes the at rest/
alarm signal). Jumper for selecting the output contact mode (potential
free or resistance 8, 2kΩ contacts).

CDR999 PHOTOCELL – SURFACE-MOUNT PHOTOELECTRIC CELLS, RANGE MAX. 10m

INFRARED BARRIERS WITH ADJUSTABLE LENSES

POWER SUPPLY 12/24Vac-dc
RANGE 10m – 60m
SENSITIVITY ADJUSTMENT CDR851R – CDR852A PHOTOCELLS
SHIELDED LENSES – GREATER IMMUNITY TO INTERFERENCE
Modulated infrared barrier consisting of a transmitter and a receiver.
It constitutes an efficient safety system for the protection of passageways or
spaces which are equipped with automatic doors or gates.
A shockproof designer case, pleasing on the eye, encloses innovative technical
solutions which make the system extremely reliable under all working conditions.
The vast range of available models meets all possible system requirements.

CDR999 PHOTOCELL Technical description

Anti-tamper aluminium case IP66 CDR842A – CDR852A PHOTOCELLS
Shockproof case IP55 CDR841 – CDR851 CDR851T CDR851R CDR841E00 CDR999 PHOTOCELLS
Self locking adjustable lens which can be rotated horizontally through plus or
minus 90° (± 45° for the CDR841I) and vertically through plus or minus 30° with
respect to the standard installation position.
These adjustments permit lateral fitting and installations where the transmitter and
receiver are at different heights.
Double-relay with serial exchange on the receivers as requested by the standards
regarding protection against accidents for motorized gates and doors.
2 indicator LEDs:
– red – indicating that the transmitter is receiving power;
– red – (photocells out of alignment or the beam is interrupted) in the receiver.
Test point (for fine tuning) on the receiver.
Sensitivity adjustment trimmer on models CDR851 – CDR852A.
Anti-tamper function on model CDR851T.
Delayed relay – 5s not adjustable on model CDR851R photocell.

ACCESSORIES CDR999

SEL50
Column in anodized aluminum 55 cm high, one module for the selector devices APRO / PHOTOCELLS and PASSO.
Pack of 2 pcs.
SEL120
Column in anodized aluminum 55 cm high, one module for the selector devices APRO / PHOTOCELLS and PASSO.
SEL120D
Column in anodized aluminum 55 cm high, one module for the selector devices APRO / PHOTOCELLS and PASSO.