-
BLUES3R
BLUES3R / BLUES 3R -HYDRAULIC RAM FOR SWING GATES
BLUES3R is a heavy duty hydraulic motor, ideal for intensive use on swing gate up to 2.5 meters.
Available in reversible or irreversible version.
The elegantly classic design hides a powerful mechanism delivering smooth and silent operations.
Safe and Precise thanks to the speed and force/thrust setting independently in opening and closing and the hydraulic deceleration function.
Constant performance over time and in any condition thanks to reduced wear&tear and the possibility to maintain the oil at the ideal temperature using HOT€426,00 + TAXBLUES3R
€426,00 + TAX -
BLUES5
BLUES5 / BLUES 5 – PISTONE OLEODINAMICO PER ANTE BATTENTI IRREVERSIBILE
BLUES5 Pistone oleodinamico di elevati standard qualitativi ideale per un uso intensivo. Disponibile nelle versioni
reversibile ed irreversibile unisce una forma esteriore sobria ed elegante ad un perfetto meccanismo di
spinta per un movimento sempre fluido e silenzioso.
Sicuro e Versatile grazie alla regolazione di forza e velocità indipendente in apertura e chiusura e ai
rallentamenti idraulici.
Rendimento costante nel tempo ed in ogni condizione grazie alla ridottissima usura dei componenti ed alla possibilità di mantenere l’olio a temperatura costante con il riscaldatore HOT (opzionale).
Sblocco con serratura cifrata.BLUES5
Pistone oleodinamico irreversibile 230 V.
Con rallentamento in apertura e chiusura
Per ante fino a 4,5 m.€495,00 + TAXBLUES5
€495,00 + TAX -
BLUES5R
BLUES5R / BLUES 5R -HYDRAULIC RAM FOR SWING GATES
BLUES5R is a heavy duty hydraulic motor, ideal for intensive use on swing gate up to 4.5 meters.
Available in reversible or irreversible version.
The elegantly classic design hides a powerful mechanism delivering smooth and silent operations.
Safe and Precise thanks to the speed and force/thrust setting independently in opening and closing and the hydraulic deceleration function.
Constant performance over time and in any condition thanks to reduced wear&tear and the possibility to maintain the oil at the ideal temperature using HOT€486,00 + TAXBLUES5R
€486,00 + TAX -
BOX MOLE1
BOX MOLE1 : EMBEDDING CASE – UNDERGROUND ACTUATOR FOR SWING GATES
BOXMOLE1 – EMBEDDING CASE IN PHASE OUT
REPLACED BY : HLBOX HLBOXCBOXMOLE1 / BOX MOLE1 : EMBEDDING CASE – UNDERGROUND ACTUATOR FOR SWING GATES
Underground gearmotor 24 V ideal for swing gates up to 3 meters.
Complete with encoder and easy release for manual operation it is safe, practical and reliable.
Safe and Precise thanks to the encoder and the slowing down in opening and closing
Practical thanks to the control unit with plug-in receiver and self-learning function.
Adjustable mechanical limits in the foundation box.
Reliable thanks to the sturdy mechanical parts and the powerful motor in perfectly water
resistant aluminum shells.BOX MOLE1
Foundation box or embedding case, complete with connection levers
and mechanical stops on opening and closing.
With cataphoresis finish. -
BOXMOLE
BOXMOLE – UNDERGROUND ACTUATOR FOR SWING GATES
BOX MOLE – EMBEDDING CASE IN PHASE OUT
REPLACED BY : HLBOX HLBOXCBOXMOLE / BOX MOLE – UNDERGROUND ACTUATOR FOR SWING GATES
Underground gearmotor 24 V ideal for swing gates up to 3 meters.
Complete with encoder and easy release for manual operation it is safe, practical and reliable.
Safe and Precise thanks to the encoder and the slowing down in opening and closing
Practical thanks to the control unit with plug-in receiver and self-learning function.
Adjustable mechanical limits in the foundation box.
Reliable thanks to the sturdy mechanical parts and the powerful motor in perfectly water
resistant aluminum shells.€189,00 + TAXBOXMOLE
€189,00 + TAX -
BOXMOLE INOX
BOX MOLE INOX : EMBEDDING CASE – UNDERGROUND ACTUATOR INOX
BOXMOLE INOX – EMBEDDING CASE IN PHASE OUT
REPLACED BY : HLBOXIBOXMOLE INOX / BOX MOLE INOX: EMBEDDING CASE – UNDERGROUND ACTUATOR FOR SWING GATES
Underground gearmotor 24 V ideal for swing gates up to 3 meters.
Complete with encoder and easy release for manual operation it is safe, practical and reliable.
Safe and Precise thanks to the encoder and the slowing down in opening and closing
Practical thanks to the control unit with plug-in receiver and self-learning function.
Adjustable mechanical limits in the foundation box.
Reliable thanks to the sturdy mechanical parts and the powerful motor in perfectly water
resistant aluminum shells. -
BSH95L16 CONDUCTIVE SAFETY EDGE 8,2kΩ
BSH95L16 – CONDUCTIVE SAFETY EDGE 8,2kΩ
BSH95L16 – 1.6-METER CONDUCTIVE SAFETY EDGE (PROFILE 95mm) – SAFETY DEVICES
BSH95L20 – 2.0-METER CONDUCTIVE SAFETY EDGE (PROFILE 95mm) – SAFETY DEVICES
BSH95L25 – 2.5-METER CONDUCTIVE SAFETY EDGE (PROFILE 95mm) – SAFETY DEVICES
BSH61L16 – 1.6-METER CONDUCTIVE SAFETY EDGE (PROFILE 61mm) – SAFETY DEVICES
BSH61L20 – 2.0-METER CONDUCTIVE SAFETY EDGE (PROFILE 61mm) – SAFETY DEVICES
BSH61L25 – 2.5-METER CONDUCTIVE SAFETY EDGE (PROFILE 61mm) – SAFETY DEVICES
CONDUCTIVE SAFETY EDGE – SAFETY DEVICES 8,2kΩ FOR SWING AND SLIDING GATES
High profile 95mm / low 61mm – contact 8,2kΩ with maximum detection speed 12 m/min – colour black
Conductive safety edge 8,2kΩ contact
The safety edges are used to eliminate the risk of crushing or shearing
caused by sliding doors, bulkheads, automatic gates etc. and respect the
requirements of the impact curve as stipulated in EN12453. The edges are
made up of a C-shaped aluminium support and a PVC profile in which a
safety sensor has been inserted. When the profile is deformed or crushed
the two metal contacts of the sensor come into contact causing the alarm
situation. The ample height of the rubber profile and the insert in conductive
rubber allow rapid intervention times fully respecting the standards and
regulations in force.€86,00 – €134,00 + TAXBSH95L16 CONDUCTIVE SAFETY EDGE 8,2kΩ
€86,00 – €134,00 + TAX -
CC242ETOP
CC242ETOP – GRAPHIC DISPLAY CONTROL UNIT FOR 1 OR 2 24V MOTORS + CHARGER + NiMH BATTERIES
CC242ETOP – ELECTRONIC CONTROL UNIT PROGRAMMERS FOR THE MANAGEMENT
OF ONE OR TWO ENCODER-CONTROLLED MOTORSElectronic CC242ETOP control unit programmer for encoder-controlled 24Vdc motors that allow
the precise position control of hinged and sliding gates fitted with a
multi-decoding module S449 – S486 – S504 – S508.
Batteries and battery charger in the CC242ETOPCB and
CC242EXTOPCB versions.The electronic CC242ETOP control unit programmer is factory fitted with a graphic LCD display
(128 x 128 pixels) with backlighting in six different languages.
The menu allows you to read the number of manoeuvres carried out
and to rapidly set the system parameters including: the sequential button
mode, automatic reclosing, warning lamp pre-flashing, intermittent
warning lamp activation, indicator light, photoelectric cell function setting
and electric lock enable etc.€252,00 + TAXCC242ETOP
€252,00 + TAX -
CC242ETOPCB
CC242ETOPCB – GRAPHIC DISPLAY CONTROL UNIT FOR 1 OR 2 24V MOTORS + CHARGER + NiMH BATTERIES
CC242ETOPCB – ELECTRONIC CONTROL UNIT PROGRAMMERS FOR THE MANAGEMENT
OF ONE OR TWO ENCODER-CONTROLLED MOTORS + charger and NiMH batteriesElectronic CC242ETOPCB control unit programmer for encoder-controlled 24Vdc motors that allow
the precise position control of hinged and sliding gates fitted with a
multi-decoding module S449 – S486 – S504 – S508.
Batteries and battery charger in the CC242ETOPCB and
CC242EXTOPCB versions.The electronic CC242ETOPCB control unit programmer is factory fitted with a graphic LCD display
(128 x 128 pixels) with backlighting in six different languages.
The menu allows you to read the number of manoeuvres carried out
and to rapidly set the system parameters including: the sequential button
mode, automatic reclosing, warning lamp pre-flashing, intermittent
warning lamp activation, indicator light, photoelectric cell function setting
and electric lock enable etc.€321,00 + TAXCC242ETOPCB
€321,00 + TAX -
CC242EXTOPCB
CC242EXTOPCB – GRAPHIC DISPLAY CONTROL UNIT FOR 1 OR 2 24V MOTORS + CHARGER + NiMH BATTERIES
CC242EXTOPCB – ELECTRONIC CONTROL UNIT PROGRAMMERS FOR THE MANAGEMENT
OF ONE OR TWO ENCODER-CONTROLLED MOTORS + charger and NiMH batteriesElectronic CC242EXTOPCB control unit programmer for encoder-controlled 24Vdc motors that allow
the precise position control of hinged and sliding gates fitted with a
multi-decoding module S449 – S486 – S504 – S508.
Batteries and battery charger in the CC242ETOPCB and
CC242EXTOPCB versions.The electronic CC242EXTOPCB control unit programmer is factory fitted with a graphic LCD display
(128 x 128 pixels) with backlighting in six different languages.
The menu allows you to read the number of manoeuvres carried out
and to rapidly set the system parameters including: the sequential button
mode, automatic reclosing, warning lamp pre-flashing, intermittent
warning lamp activation, indicator light, photoelectric cell function setting
and electric lock enable etc.€336,00 + TAXCC242EXTOPCB
€336,00 + TAX -
CDR841E00 – PHOTOCELL
CDR841E00 – PHOTOCELL WITH SURFACE MOUNT CASE
IP55 RANGE 15MCDR841E00 PHOTOCELL – PHOTOELECTRIC OR PHOTOCELLS IN A SHOCKPROOF CASE IP55
Maximum range 15m – 60m
Power supply 12/24Vac-dc
Protection grade IP55
Transmitter and receiver housed in a waterproof plastic case.
Double-relay with serial exchange.
Sensitivity adjustment trimmer located on the receiver (only
CDR851).CDR841E00 PHOTOCELL – SURFACE-MOUNT PHOTOELECTRIC CELLS, RANGE MAX. 15m
The kit contains a pair of surface-mount photoelectric cells, 2 lens
covers for surface-mount photocells and 2 fast-fitting wall brackets€43,00 + TAXCDR841E00 – PHOTOCELL
€43,00 + TAX
