• BL ASY3

    BL ASY3 – ELECTROMECHANICAL RAM 230V IRREVERSIBLE
    BL ASY3 – IS IN PHASE OUT
    BLADE3 – ELECTROMECHANICAL RAM 230V IRREVERSIBLE NEW MOTOR REPLACING THE BL EASY3

    BL ASY3 – ELECTROMECHANICAL RAM WITH A 230V MOTOR 3M
    Self-locking encoder-controlled ram with mechanical travel limits. The
    geared motor locks the gate leaf in the closed position.
    Supplied with all the fittings necessary for mounting one ram including
    the front and rear brackets in galvanised steel.
    ECU to be ordered separately T600.

    BL ASY3
    Standard version elettromeccanical RAM 230V IRREVERSIBLE for gates max. length 3m,
    max. weight 250kg.

  • BL ASY324

    BL ASY324 – ELECTROMECHANICAL RAM 24V IRREVERSIBLE
    BL ASY324 – IS IN PHASE OUT
    BLADE324 – ELECTROMECHANICAL RAM 24V IRREVERSIBLE NEW MOTOR REPLACING THE BL EASY324

    BL ASY324 – ELECTROMECHANICAL RAM WITH A 24V MOTOR 3M
    Self-locking encoder-controlled ram with mechanical travel limits. The
    geared motor locks the gate leaf in the closed position.
    Supplied with all the fittings necessary for mounting one ram including
    the front and rear brackets in galvanised steel.
    ECU to be ordered separately T624.

    BL ASY324
    Standard version elettromeccanical RAM 24V IRREVERSIBLE for gates max. length 3m,
    max. weight 250kg.

  • BL ASY3REV

    BL ASY3REVELECTROMECHANICAL RAM 230V REVERSIBLE
    BL ASY3REV – IS IN PHASE OUT
    BLADE3REV – ELECTROMECHANICAL RAM 230V REVERSIBLE NEW MOTOR REPLACING THE BL EASY3REV

    BL ASY3REV – ELECTROMECHANICAL RAM CARDIN WITH A 230V MOTOR 3M
    Self-locking encoder-controlled ram with mechanical travel limits. The
    geared motor locks the gate leaf in the closed position.
    Supplied with all the fittings necessary for mounting one ram including
    the front and rear brackets in galvanised steel.
    ECU to be ordered separately T600.

    BL ASY3REV
    Standard version elettromeccanical RAM 230V REVERSIBLE for gates max. length 3m,
    max. weight 250kg.

  • BL ASY5

    BL ASY5 – ELECTROMECHANICAL RAM 230V IRREVERSIBLE
    BL ASY5 – IS IN PHASE OUT
    BLADE5 – ELECTROMECHANICAL RAM 230V IRREVERSIBLE HAS NEW MOTOR REPLACING THE BL EASY5

    BL ASY5 – ELECTROMECHANICAL RAM WITH A 230V MOTOR 5M
    Self-locking encoder-controlled ram with mechanical travel limits. The
    geared motor locks the gate leaf in the closed position.
    Supplied with all the fittings necessary for mounting one ram including
    the front and rear brackets in galvanised steel.
    ECU to be ordered separately T600.

    BL ASY5
    Standard version elettromeccanical RAM 230V IRREVERSIBLE for gates max. length 5m,
    max. weight 350kg.

  • BL ASY524

    BL ASY524 – ELECTROMECHANICAL RAM 24V IRREVERSIBLE
    BL ASY524 – IS IN PHASE OUT
    BLADE524 – ELECTROMECHANICAL RAM 24V IRREVERSIBLE NEW MOTOR REPLACING THE BL EASY524

    BL ASY524 – ELECTROMECHANICAL RAM WITH A 24V MOTOR 5M
    Self-locking encoder-controlled ram with mechanical travel limits. The
    geared motor locks the gate leaf in the closed position.
    Supplied with all the fittings necessary for mounting one ram including
    the front and rear brackets in galvanised steel.
    ECU to be ordered separately T624.

    BL ASY524
    Standard version elettromeccanical RAM 24V IRREVERSIBLE for gates max. length 5m,
    max. weight 250kg.

  • BL ASY524REV

    BL ASY524REV – ELECTROMECHANICAL RAM 24V REVERSIBLE
    BL ASY524REV– IS IN PHASE OUT
    BLADE524REV – ELECTROMECHANICAL RAM 24V REVERSIBLE NEW MOTOR REPLACING THE BL EASY524

    BL ASY524REV – ELECTROMECHANICAL RAM WITH A 24V MOTOR 5M
    Self-locking encoder-controlled ram with mechanical travel limits. The
    geared motor locks the gate leaf in the closed position.
    Supplied with all the fittings necessary for mounting one ram including
    the front and rear brackets in galvanised steel.
    ECU to be ordered separately T624.

    BL ASY524REV
    Standard version elettromeccanical RAM 24V REVERSIBLE for gates max. length 5m,
    max. weight 250kg.

  • BL ASY5REV

    BL ASY5REV – ELECTROMECHANICAL RAM 230V REVERSIBLE
    BL ASY5REV – IS IN PHASE OUT
    BLADE5REV – ELECTROMECHANICAL RAM 230V REVERSIBLE NEW MOTOR REPLACING THE BL EASY5REV

    BL ASY5REV – ELECTROMECHANICAL RAM WITH A 230V MOTOR 5M
    Self-locking encoder-controlled ram with mechanical travel limits. The
    geared motor locks the gate leaf in the closed position.
    Supplied with all the fittings necessary for mounting one ram including
    the front and rear brackets in galvanised steel.
    ECU to be ordered separately T600.

    BL ASY5REV
    Standard version elettromeccanical RAM 230V IRREVERSIBLE for gates max. length 5m,
    max. weight 350kg.

  • BL STEALTH

    BLSTEALTH – ELECTROMECHANICAL UNIT WITH A 24V MOTOR

     BLSTEALTH  / BL STELTH – SELF-LOCKING GROUP MASTER WITH ENCODER 24V MAX. 200KG and 2,5m

    BLSTEALTH ELECTROMECHANICAL UNIT WITH A 24V MOTOR
    Self-locking Master unit controlled by mechanical travel limits with
    an in-built electronic programmer.
    Kit battery charger + batteries to be ordered separately.
    Particularly suited for installations with narrow columns that require
    the mounting base to be less than 180mm in width and also for
    gates where the hinges are not aligned to the edge of the column
    and with gate leaves of up to 2 metres in length (2,5m with an
    electric lock), 200kg maximum weight.
    Manual release is carried out using a practical locking – unlocking
    lever protected by a security key.
    Operator arm included.

    BL STEALTH

    442,00 + TAX
  • BL STEALTHS

    BLSTEALTHS – ELECTROMECHANICAL UNIT WITH A 24V MOTOR

     BLSTEALTHS  / BL STEALTHS – SELF-LOCKING GROUP SLAVE WITH ENCODER 24V MAX. 200KG and 2,5m

    BLSTEALTHS ELECTROMECHANICAL UNIT WITH A 24V MOTOR
    Self-locking BLSTEALTHS Slave unit controlled by mechanical travel limits with
    an in-built electronic programmer.
    Kit battery charger + batteries to be ordered separately.
    Particularly suited for installations with narrow columns that require
    the mounting base to be less than 180mm in width and also for
    gates where the hinges are not aligned to the edge of the column
    and with gate leaves of up to 2 metres in length (2,5m with an
    electric lock), 200kg maximum weight.
    Manual release is carried out using a practical locking – unlocking
    lever protected by a security key.
    Operator arm included.

    BL STEALTHS

    297,00 + TAX
  • BL1920

    BL1920 DX – HINGED ARM AUTOMATION FOR
    SWING GATES DX(RIGHT HAND) 230V MOTOR

     BL1920 DX  – HINGED ARM AUTOMATION FOR SWING GATES DX(RIGHT HAND) WITH
    ENCODER 24V PESO MAX. 150KG AND 2M

    BL1920   DX :  RIGHT-HAND OPERATOR UNIT WITH A 230V MOTOR
    Self-locking operator with magnetic travel limits:
    – operator arm included;
    – ECU to be ordered separately.

    BL1920 Operational constraints:

    The equipment BL1920 DX is particularly suitable for gates
    with pillars
    large with internal hinges with respect to the pillar line.
    Ideal also for gates with leaves up to 2 meters in length, max. 150kg.
    The manual release takes place after the key door has been removed using the supplied key

    BL1920

    258,00 + TAX
  • BL1920L

    BL1920L SX – HINGED ARM AUTOMATION FOR
    SWING GATES SX(LEFT HAND) 230V MOTOR

     BL1920L SX  – HINGED ARM AUTOMATION FOR SWING DOORS SX(LEFT HAND) WITH
    ENCODER 24V PESO MAX. 150KG AND 2M

    BL1920L SX :  LEFT-HAND OPERATOR UNIT WITH A 230V MOTOR
    Self-locking operator with magnetic travel limits:
    – operator arm included;
    – ECU to be ordered separately.

    BL1920L SX Operational constraints:

    The equipment BL1920 DX is particularly suitable for swing doors or gates
    with pillars
    large with internal hinges with respect to the pillar line.
    Ideal also for gates with leaves up to 2 meters in length, max. 150kg.
    The manual release takes place after the key door has been removed using the supplied key.

    BL1920L

    258,00 + TAX
  • BL1924ASW

    BL1924ASW DX – HINGED ARM AUTOMATION FOR
    SWING GATE DX(RIGHT HAND) 24V MOTOR

     BL1924ASW DX  – HINGED ARM AUTOMATION FOR SWING DOOR DX(RIGHT HAND) WITH
    ENCODER 24V PESO MAX. 150KG AND 2M

    BL1924ASW  DX: RIGHT-HAND OPERATOR UNIT WITH A 24V MOTOR
    Self-locking encoder-controlled operator:
    – operator arm included;
    – ECU to be ordered separately.

    BL1924ASW DX  Operational constraints:

    The equipment BL1924ASW DX is particularly suitable for gates
    with pillars
    large with internal hinges with respect to the pillar line.
    Ideal also for gates with leaves up to 2 meters in length, max. 150kg.
    The manual release takes place after the key door has been removed using the supplied key.

    BL1924ASW

    283,00 + TAX

Main Menu