PRG900 – GRAPHIC DISPLAY CONTROL UNIT FOR 1 OR 2 24V MOTORS

PRG900 – ELECTRONIC CONTROL UNIT PROGRAMMERS FOR THE MANAGEMENT OF ONE OR TWO MOTORS
Electronic PRG900 control unit programmer for the control of 24Vdc hinged gates with
intelligent time control functions that allow you to control the position of
the hinged and sliding gates, .

The PRG900 control uniti fitted with a multi-decoding module S449
– S486 – S504 – S508. Gate travel time programming is fully automatic
and guided by a 6-digit display which allows you to visualise the number
of manoeuvres carried out and to set several parameters such as the
type of motor, the torque setting and the limited opening distance.

Dip-switches allow you to set the system parameters including: the
sequential button mode, automatic reclosing, warning lamp pre-flashing,
intermittent warning lamp activation, indicator light and photoelectric cell
function setting and electric lock enable.

PRG230M2 – ELECTRONIC MICROPROCESSOR CONTROL UNIT FOR 230V MOTORS

PRG230M2  – ELECTRONIC PROGRAMMERS FOR THE CONTROL OF TWO 230V MOTORS
WITH MAXIMUM POWER YIELD 470 + 470W
Digital work time control separately memorised for each gate leaf guided by a
6-digit display. Possible operation without mechanical travel limits. Torque setting.
Maximum power initial thrust control, torque limitation and deceleration
management with deceleration zone control. The appliance is fitted with an
interface for the insertion of a standard Cardin radio receiver card.
Suitable for the control of automatic gates and doors with two 230V motors.

MAINS POWER SUPPLY 230Vac
MOTOR OUTPUT 230Vac
PROTECTION GRADE IP55
FIREPROOFING GRADE V2
INTERFACE FOR A STANDARD SLOT-IN RADIO CARD
COMMAND INPUTS: TA, TC, TD, TB.
ELECTRONIC PROGRAMMERS
LED DISPLAY

PRG383OCE – INDUSTRIAL PROGRAMMER CONTROLLING ONE THREE PHASE MOTOR

PRG383OCE – INDUSTRIAL PROGRAMMER OR CONTROL UNIT CONTROLLING ONE THREE PHASE MOTOR 230V 400V.
INDUSTRIAL PROGRAMMER CONTROLLING ONE SINGLE PHASE / THREE PHASE MOTOR
ELECTRONIC CONTROL UNIT, BASIC VERSION
– 370W single phase power supply 230Vac,
– 700W three phase power supply 400Vac.

Automatic, semiautomatic, manual and remote control functions.
Command inputs TA, TB, TC, TD, TAL.
Incorporated door security switch.
Optional external control buttons.
Electric brake output.
Interface for a standard slot-in radio receiver card.
Supplied with 4 x Ø16mm cable glands.
The control unit is supplied with 4 x Ø16mm cable glands.
The PRG383OCE control unit is Suitable for the control of industrial gates and doors with one three
phase motor.