Control units
-
RQM508C1
RQM508C1 – 868MHz STANDARD MIN 1-CHANNEL RECEIVER IN BOX (12 / 24Vac-dc).
RQM508C1 – 868MHz STANDARD INDOOR MINI 1-CHANNEL RECEIVER IN BOX (12 / 24Vac-dc).
The unit RQM504C2 is an electronic circuit with a 7-way terminal block; Fitted with 1 relay
channels which can be set to ON/OFF or impulsive.
Possibility of memorising up to 1000 codes.ABS indoor enclosure – IP20.
Overall dimensions(mm) 80 x 50 x 22.€52,00 + TAXRQM508C1
€52,00 + TAX -
RQM504C1
RQM504C2 – 433MHz STANDARD MIN 2-CHANNEL RECEIVER IN BOX (12 / 24Vac-dc).
RQM504C2 – 433MHz STANDARD INDOOR MINI 2-CHANNEL RECEIVER IN BOX (12 / 24Vac-dc).
The unit RQM504C2 is an electronic circuit with a 10-way terminal block; Fitted with 2 relay
channels which can be set to ON/OFF or impulsive.
Possibility of memorising up to 1000 codes.ABS indoor enclosure – IP20.
Overall dimensions(mm) 95 x 75 x 25.€51,00 + TAXRQM504C1
€51,00 + TAX -
SPW10
SPW 10 – SUPPLEMENTARY SOLAR PANEL KIT FOR SUN POWER
SPW10 –SUPPLEMENTARY SOLAR PANEL KIT FOR SUN POWER
SUPPLEMENTARY PHOTOVOLTAIC SOLAR PANEL KIT :
Two photovoltaic panels complete with adjustable brackets.
SPW10 Kit to increase the power capacity of SUNPOWER Power cupply system€168,00 + TAXSPW10
€168,00 + TAX -
SUNPOWER
SUN POWER – KIT SOLAR PANEL POWER SUPPLY
SUNPOWER – POWER SUPPLY KIT
SUN POWER Solar panels for use with all 24Vdc automation.
Two solar panels complete with adjustable brackets.
Watertight box with batteries, command electronics and charger.
This product uses solar energy to power automatic devices
for gates, garage doors, and road barriers etc. situated far
away from the mains power lines, all without needing any sort
of excavation or bric work. SUN POWER is compatible with
all the Cardin Trade control units for 24Vdc motors, making
them independent, reducing electricity costs and respecting
the environment.€301,00 + TAXSUNPOWER
€301,00 + TAX -
T124 CONTROL UNIT
T124 – CONTROL UNIT MOTORS 24V
T124 / T 124 – ELECTRONIC PROGRAMMER FOR ONE OR TWO 24V MOTORS
Control unit T124 for 1 motor 24 Vdc, with torque adjustment, slowing down and encoder
Encoder controlled programmer with torque limitation, deceleration,
inputs for safety edges in both the opening and closing directions,
safety device exclusion via dip-switch:
– second channel OC2 output (contact US1);
– connection for the keypad TAST3F;
– BSA and BSC inputs for 8K2 safety edges.€152,00 + TAXT124 CONTROL UNIT
€152,00 + TAX -
T224 CONTROL UNIT
T224 – CONTROL UNIT MOTORS 24V
T224 – CONTROL UNIT IN PHASE OUT
REPLACED BY THE : T624T224 / T 224 – ELECTRONIC PROGRAMMER FOR ONE OR TWO 24V MOTORS
Control unit T224 for 2 motors 24 Vdc, with torque adjustment, slowing down and encoder
Encoder controlled programmer with torque limitation, deceleration,
inputs for safety edges in both the opening and closing directions,
safety device exclusion via dip-switch:
– second channel OC2 output (contact US1);
– connection for the keypad TAST3F;
– BSA and BSC inputs for 8K2 safety edges.€199,00 + TAXT224 CONTROL UNIT
€199,00 + TAX -
T21B CONTROL UNIT
T 21B – ELECTRONIC CONTROL UNIT
T21B CONTROL UNIT – ELECTRONIC PROGRAMMER CONTROLLING ONE 230V MOTOR
T 21B for rolling grills or rolling shutters max. 1300W.
Supplied with a fitted RSQ504OC2 receiver card.
Protection grade IP55.
MAINS POWER SUPPLY 230Vac
MOTOR OUTPUT 230Vac
MOTOR POWER 1000W.
PROTECTION GRADE IP55
FIREPROOFING GRADE V2€70,00 + TAXT21B CONTROL UNIT
€70,00 + TAX -
T31 CONTROL UNIT
T 31 – ELECTRONIC CONTROL UNIT
T31 – ELECTRONIC CONTROL UNIT
Control unit for 1 roller shutter motor in 230 V.
Plug in receiver (optional).
T31 Control unit like T21, but with limit switch inputs,
motor force adjustment and courtesy light output.
MAINS POWER SUPPLY 230Vac
MOTOR OUTPUT 230Vac
MOTOR POWER 1000W.
PROTECTION GRADE IP55
FIREPROOFING GRADE V2 -
T1 CONTROL UNIT
T 1 – ELECTRONIC CONTROL UNIT
T1 – ELECTRONIC CONTROL UNIT
Control unit for 1 roller shutter motor in 230 V.
Plug in receiver (optional).
T 1 Control unit for motor in handead man function.€40,00 + TAXT1 CONTROL UNIT
€40,00 + TAX -
T600 CONTROL UNIT
T600 ELECTRONI CONTROL UNIT 230V
T 600 ELECTRONIC CONTROL UNIT FOR TWO 230V MOTORS
Control unit T600 for 1/2 motors 230 Vdc, with torque adjustment, slowing down and encoder.
Encoder controlled programmer with torque limitation, deceleration
and safety device exclusion via dip-switch:
– new external 32VA transformer;
– third programming button;
– flashing warning light output;
– second channel OC2 output (contact US1);
– terminal blocks for motor capacitor connection;
– connection for the keypad TAST3F;
– BSA and BSC inputs for 8K2 safety edges.€176,00 + TAXT600 CONTROL UNIT
€176,00 + TAX -
CC242ETOP
CC242ETOP – GRAPHIC DISPLAY CONTROL UNIT FOR 1 OR 2 24V MOTORS + CHARGER + NiMH BATTERIES
CC242ETOP – ELECTRONIC CONTROL UNIT PROGRAMMERS FOR THE MANAGEMENT
OF ONE OR TWO ENCODER-CONTROLLED MOTORSElectronic CC242ETOP control unit programmer for encoder-controlled 24Vdc motors that allow
the precise position control of hinged and sliding gates fitted with a
multi-decoding module S449 – S486 – S504 – S508.
Batteries and battery charger in the CC242ETOPCB and
CC242EXTOPCB versions.The electronic CC242ETOP control unit programmer is factory fitted with a graphic LCD display
(128 x 128 pixels) with backlighting in six different languages.
The menu allows you to read the number of manoeuvres carried out
and to rapidly set the system parameters including: the sequential button
mode, automatic reclosing, warning lamp pre-flashing, intermittent
warning lamp activation, indicator light, photoelectric cell function setting
and electric lock enable etc.€252,00 + TAXCC242ETOP
€252,00 + TAX -
CC242ETOPCB
CC242ETOPCB – GRAPHIC DISPLAY CONTROL UNIT FOR 1 OR 2 24V MOTORS + CHARGER + NiMH BATTERIES
CC242ETOPCB – ELECTRONIC CONTROL UNIT PROGRAMMERS FOR THE MANAGEMENT
OF ONE OR TWO ENCODER-CONTROLLED MOTORS + charger and NiMH batteriesElectronic CC242ETOPCB control unit programmer for encoder-controlled 24Vdc motors that allow
the precise position control of hinged and sliding gates fitted with a
multi-decoding module S449 – S486 – S504 – S508.
Batteries and battery charger in the CC242ETOPCB and
CC242EXTOPCB versions.The electronic CC242ETOPCB control unit programmer is factory fitted with a graphic LCD display
(128 x 128 pixels) with backlighting in six different languages.
The menu allows you to read the number of manoeuvres carried out
and to rapidly set the system parameters including: the sequential button
mode, automatic reclosing, warning lamp pre-flashing, intermittent
warning lamp activation, indicator light, photoelectric cell function setting
and electric lock enable etc.€321,00 + TAXCC242ETOPCB
€321,00 + TAX