PRG302E

109,00 + TAX

In stock

PRG302E - ELECTRONIC MICROPROCESSOR CONTROL UNIT FOR 230V MOTORS

PRG302E  - ELECTRONIC CONTROL UNIT PROGRAMMERS FOR TWO 230V MOTORS
WITH MAXIMUM POWER YIELD 600W.
Digital work time control. Possible operation without mechanical travel limits.
Command inputs: TA, TC, TD, TB. The appliance is fitted with an interface for the
insertion of a standard Cardin radio receiver card (complete with cable glands
Ø 2 x Ø9mm + Ø 2 x Ø16mm).
Suitable for the control of automatic road barriers.

If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount

Compare
SKU: CA-PRG302E Categories: , , ,

PRG302E – ELECTRONIC MICROPROCESSOR CONTROL UNIT FOR 230V MOTORS

PRG302E  – ELECTRONIC CONTROL UNIT PROGRAMMERS FOR TWO 230V MOTORS
WITH MAXIMUM POWER YIELD 600W.
Digital work time control. Possible operation without mechanical travel limits.
Command inputs: TA, TC, TD, TB. The appliance is fitted with an interface for the
insertion of a standard Cardin radio receiver card (complete with cable glands
Ø 2 x Ø9mm + Ø 2 x Ø16mm).
Suitable for the control of automatic road barriers.

If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount

PRG302E  ELECTRONIC CONTROL UNIT PROGRAMMER
FOR THE CONTROL OF TWO MOTORS
230V

MAINS POWER SUPPLY 230Vac
MOTOR OUTPUT 230Vac
PROTECTION GRADE IP55
FIREPROOFING GRADE V2
INTERFACE FOR A STANDARD SLOT-IN RADIO CARD
COMMAND INPUTS: TA, TC, TD, TB.
ELECTRONIC PROGRAMMERS
LED DISPLAY
Electronic devices  PRG302E  control unit for the control of automatic opening systems.
Specially studied and designed for this type of use, these Cardin programmers are fitted with digital
“step by step” time programming which is easily carried out in real time while the
gate is moving thus reducing the installation time.
The simplified programming method uses one or two buttons (depending on the
version) allowing all functions to be programmed rapidly.

Version two gate leaves

In the double gate/door version the programming of PRG302E  procedure is guided by a LED display.
The complete range of products have been designed and constructed in
accordance with the safety standards in force and feature automatic, semiautomatic,
manual and remote control functions (the product takes a Cardin
standard slot-in receiver card).
Electronic devices for the control of automatic opening systems with one or two
gate leaves: sliding gates, hinged gates and garage doors powered by 230Vac.
The complete range of  programmers simplifies and solves all possible installation
problems. The high product-quality level of PRG302E control unit together with accurate design and a
selective choice of materials allows trouble free operation and maximum reliability
under all kinds of working conditions.

PRG302E  CONTROL UNIT ACCESSORIES

RSQ504OC2 – RSQ508OC2
RSQ504OC2 – RSQ508OC2 433 or 868MHz RECEIVERS to control the gates in remote control

YPR302SR2 : SLOT-IN CARD
Slot-in card that allows the complete control of the opening and closing microswitches
as well as the control of the inverting photocells (for application on 230V
road barriers).

ADDITIONAL FUNCTION CARD
Optional card that allows the PRG230M2 control unit to extend the functions of the control units:
– Timer-controlled lamp 230Vac – 500W
(electric lock or an electric brake can be fitted as an alternative);
– 8,2kΩ safety edge management.

CABLE GLANDS KIT
Cable glands 4 x Ø16mm.

Additional information

Weight 4 kg
Dimensions 0,30 × 0,30 × 0,30 m
Be the first to review “PRG302E”

Your email address will not be published. Required fields are marked *

CAPTCHA ImageChange Image

Reviews

There are no reviews yet.

See It Styled On Instagram

    No access token

Main Menu