CARDIN brand – All products are Cardin
-
HLMOLE230
HLMOLE230 : UNDERGROUND GEAR MOTOR 230V
HLMOLE230 – SELF-LOCKING MOTOR IN PHASE OUT
REPLACED BY NEW MODEL : HLXCORE230 MOTORHLMOLE230 / HL MOLE230 ELECTROMECHANICAL UNDERGROUND OPERATOR WITH A 230V 3M
MOTOR FOR GATES WITH A 105° MAXIMUM OPENING ANGLE
Encoder controlled self-locking operator:
– fitted with a crank rod transmission system;
– supplied with a 3m connection cable;
– embedding case and Cardin electronic programmer to be ordered separately.HL MOLE 230
230V underground electromechanical gearmotor for leaves up to 3 m.
It replaces the old model TELCOMA ROCK -
HLMOLE24
HLMOLE24 : UNDERGROUND GEAR MOTOR 24V
HLMOLE24 – SELF-LOCKING MOTOR IN PHASE OUT
REPLACED BY NEW MOTOR : HLXCORE24 MOTORHLMOLE24 / HL MOLE24 ELECTROMECHANICAL UNDERGROUND OPERATOR WITH A 24V 3M
MOTOR FOR GATES WITH A 105° MAXIMUM OPENING ANGLE
Encoder controlled self-locking operator:
– fitted with a crank rod transmission system;
– supplied with a 2m connection cable;
– embedding case and Cardin electronic programmer to be ordered separately.HL MOLE 24
24 V underground electromechanical gearmotor for leaves up to 3 m.
It replaces the old model TELCOMA ROCK -
KT-BLSTEALTH
KT-BL STEALTH –COMPLETE KIT BL STEALTH SERIES WITH 24V MOTOR
KIT KT-BL STEALTH IN PHASE OUT –
REPLACED WITH KIT : KT-BLGRIFFE24 or KT-BLGRIFFE24TKT-BLSTEALTH / KT BLSTEALTH – COMPLETE KIT SERIES BL STEALTH – WITH ENCODER 24V MAX WEIGHT. 200KG
KT-BLSTEALTH / KT BL STEALTH USING
Particularly suited for installations with narrow columns that require the mounting
base to be less than 180mm in width and also for gates where the hinges are
not aligned to the edge of the column and with gate leaves of up to 2 metres
in length (2,5m with an electric lock) 200kg maximum weight. -
BL824S
BL824S – ELECTROMECHANICAL GROUP WITH 24V MOTOR SLAVE
BL824-S – MOTOR IS IN PHASE OUT
BL824S MOTOR – SELF-LOCKING GROUP SLAVE WITH ENCODER 24V MAX. 200KG
BL824S MOTOR SLAVE Encoder-controlled self-locking Master unit including:
– electronic programmer;
– 433MHz FM receiver;
Particularly suited for installations with narrow columns that require
the mounting base to be less than 150mm in width and also for
gates where the hinges are not aligned to the edge of the column
and with gate leaves of up to 2 metres in length (2,5m with a hinged
arm and an electric lock) 200kg maximum weight.
Manual release is carried out using the hexagonal key located inside
the side panel.
Operator arm to be ordered separately. -
BLTOW24M
BLTOW24M MASTER- ELECTROMECHANICAL GROUP WITH 24V MOTOR
BLTOW24M MOTOR IN PHASE OUT –
REPLACED WITH MOTORS : BLGRIFFE24M or BLGRIFFE24TMBLTOW24M MASTER – SELF-LOCKING GROUP WITH ENCODER 24V MAX. 200KG + NIMH BATTERIES(optional)
BLTOW24M MASTER Encoder-controlled self-locking Master unit for swing gate with hinged arms including:
– electronic programmer;
– 433MHz FM receiver;
– gate movement signalling via led (optional).
Kit battery charger + batteries to be ordered separately.
Particularly suited for installations with narrow columns that require
the mounting base to be less than 180mm in width and also for
gates where the hinges are not aligned to the edge of the column
and with gate leaves of up to 2 metres in length (2,5m with an
electric lock), 200kg maximum weight.
Manual release is carried out using a practical locking – unlocking
lever protected by a security key.
Operator arm included. -
BLTOW24S
BLTOW24S SLAVE- ELECTROMECHANICAL GROUP WITH 24V MOTOR
BLTOW24S MOTOR IN PHASE OUT –
REPLACED WITH MOTOR : BLGRIFFE24SBLTOW24S SLAVE – SELF-LOCKING GROUP WITH ENCODER 24V MAX. 200KG
BLTOW24S SLAVE Encoder-controlled self-locking Slave unit for swing gate with hinged arms including:
– electronic programmer;
– 433MHz FM receiver;
– gate movement signalling via led (optional).
Kit battery charger + batteries to be ordered separately.
Particularly suited for installations with narrow columns that require
the mounting base to be less than 180mm in width and also for
gates where the hinges are not aligned to the edge of the column
and with gate leaves of up to 2 metres in length (2,5m with an
electric lock), 200kg maximum weight.
Manual release is carried out using a practical locking – unlocking
lever protected by a security key.
Operator arm included. -
BL1924ASW
BL1924ASW DX – HINGED ARM AUTOMATION FOR
SWING GATE DX(RIGHT HAND) 24V MOTORBL1924ASW MOTOR IS IN PHASE OUT –
REPLACED WITH MOTORS : BLGRIFFE24M or BLGRIFFE24TMBL1924ASW DX – HINGED ARM AUTOMATION FOR SWING DOOR DX(RIGHT HAND) WITH
ENCODER 24V PESO MAX. 150KG AND 2M
BL1924ASW DX: RIGHT-HAND OPERATOR UNIT WITH A 24V MOTOR
Self-locking encoder-controlled operator:
– operator arm included;
– ECU to be ordered separately.BL1924ASW DX Operational constraints:
The equipment BL1924ASW DX is particularly suitable for gates
with pillars large with internal hinges with respect to the pillar line.
Ideal also for gates with leaves up to 2 meters in length, max. 150kg.
The manual release takes place after the key door has been removed using the supplied key. -
BL1924LSW
BL1924LSW SX – HINGED ARM AUTOMATION FOR
SWING GATES SX(LEFT HAND) 24V MOTORBL1924LSW MOTOR IS IN PHASE OUT –
REPLACED WITH MOTORS : BLGRIFFE24M or BLGRIFFE24TMBL1924LSW SX – HINGED ARM AUTOMATION FOR SWING GATES DX(RIGHT HAND) WITH
ENCODER 24V PESO MAX. 150KG AND 2M
BL1924LSW SX : LEFT-HAND OPERATOR UNIT WITH A 24V MOTOR
Self-locking encoder-controlled operator:
– operator arm included;
– ECU to be ordered separately.Operational constraints:
The equipment BL1924LSW is particularly suitable for gates
with pillars large with internal hinges with respect to the pillar line.
Ideal also for gates with leaves up to 2 meters in length, max. 150kg.
The manual release takes place after the key door has been removed using the supplied key. -
BL1920
BL1920 DX – HINGED ARM AUTOMATION FOR
SWING GATES DX(RIGHT HAND) 230V MOTORBL1920 DX MOTOR IS IN PHASE OUT –
REPLACED WITH MOTORS : BLGRIFFE24M or BLGRIFFE24TMBL1920 DX – HINGED ARM AUTOMATION FOR SWING GATES DX(RIGHT HAND) WITH
ENCODER 24V PESO MAX. 150KG AND 2M
BL1920 DX : RIGHT-HAND OPERATOR UNIT WITH A 230V MOTOR
Self-locking operator with magnetic travel limits:
– operator arm included;
– ECU to be ordered separately.BL1920 Operational constraints:
The equipment BL1920 DX is particularly suitable for gates
with pillars large with internal hinges with respect to the pillar line.
Ideal also for gates with leaves up to 2 meters in length, max. 150kg.
The manual release takes place after the key door has been removed using the supplied key -
BL1920L
BL1920L SX – HINGED ARM AUTOMATION FOR
SWING GATES SX(LEFT HAND) 230V MOTORBL1920LSX MOTOR IS IN PHASE OUT –
REPLACED WITH MOTORS : BLGRIFFE24M or BLGRIFFE24TMBL1920L SX – HINGED ARM AUTOMATION FOR SWING DOORS SX(LEFT HAND) WITH
ENCODER 24V PESO MAX. 150KG AND 2M
BL1920L SX : LEFT-HAND OPERATOR UNIT WITH A 230V MOTOR
Self-locking operator with magnetic travel limits:
– operator arm included;
– ECU to be ordered separately.BL1920L SX Operational constraints:
The equipment BL1920 DX is particularly suitable for swing doors or gates
with pillars large with internal hinges with respect to the pillar line.
Ideal also for gates with leaves up to 2 meters in length, max. 150kg.
The manual release takes place after the key door has been removed using the supplied key. -
BL STEALTH
BLSTEALTH / BL STEALTH – ELECTROMECHANICAL UNIT WITH A 24V MOTOR
BL STEALTH MOTOR IN PHASE OUT –
REPLACED WITH MOTORS : BLGRIFFE24M or BLGRIFFE24TMBLSTEALTH / BL STELTH – SELF-LOCKING GROUP MASTER WITH ENCODER 24V MAX. 200KG and 2,5m
BLSTEALTH ELECTROMECHANICAL UNIT WITH A 24V MOTOR
Self-locking Master unit controlled by mechanical travel limits with
an in-built electronic programmer.
Kit battery charger + batteries to be ordered separately.
Particularly suited for installations with narrow columns that require
the mounting base to be less than 180mm in width and also for
gates where the hinges are not aligned to the edge of the column
and with gate leaves of up to 2 metres in length (2,5m with an
electric lock), 200kg maximum weight.
Manual release is carried out using a practical locking – unlocking
lever protected by a security key.
Operator arm included. -
BL STEALTHS
BLSTEALTHS – ELECTROMECHANICAL UNIT WITH A 24V MOTOR
BL STEALTHS MOTOR IN PHASE OUT –
REPLACED WITH MOTOR : BLGRIFFE24SBLSTEALTHS / BL STEALTHS – SELF-LOCKING GROUP SLAVE WITH ENCODER 24V MAX. 200KG and 2,5m
BLSTEALTHS ELECTROMECHANICAL UNIT WITH A 24V MOTOR
Self-locking BLSTEALTHS Slave unit controlled by mechanical travel limits with
an in-built electronic programmer.
Kit battery charger + batteries to be ordered separately.
Particularly suited for installations with narrow columns that require
the mounting base to be less than 180mm in width and also for
gates where the hinges are not aligned to the edge of the column
and with gate leaves of up to 2 metres in length (2,5m with an
electric lock), 200kg maximum weight.
Manual release is carried out using a practical locking – unlocking
lever protected by a security key.
Operator arm included.