SLX24DRACO

799,00 + TAX

In stock

SLX24DRACO - ELECTROMECHANICAL UNIT WITH A 24V MOTOR

SLX24DRACO  MOTOR - FAST SELF-LOCKING UNIT ENCODER 24V MAX. 1000KG + NIMH BATTERIES FOR SLIDING GATE

The SLX24DRACO motor for sliding gate automation is made up of a self-locking gear motor controlled
by magnetic encoder with an in-built:
- electronic programmer;
- 433MHz FM receiver;
The innovative DRACO system permits the gate's movement to
be accompanied with total security and features a “variable speed
function” which can be adjusted according to the different installation
requirements up to a maximum speed of 30m per minute.

The electronic programmer is factory fitted with a graphic LCD display
(128 x 128 pixels) with backlighting in six different languages.
The menu allows you to rapidly set the system parameters including:
the sequential button mode, automatic reclosing, warning lamp
pre-flashing, intermittent warning lamp activation, indicator light and
photoelectric cell function setting etc.
The electronics card, thanks to the presence of the real-time clock,
allows you to set 10 events (shown on the display) and these events
permit you to regulate the opening and closing of the motor at
different times during the day. The appliance is fitted with a safe and
secure lever operated manual release system protected by a robust
access door with a personalised key.

Compare
SKU: CA-SLX24DRACO Categories: , , ,

SLX24DRACO – ELECTROMECHANICAL UNIT WITH A 24V MOTOR

SLX24DRACO  MOTOR – FAST SELF-LOCKING UNIT ENCODER 24V MAX. 1000KG + NIMH BATTERIES FOR SLIDING GATE

The SLX24DRACO motor for sliding gate automation is made up of a self-locking gear motor controlled
by magnetic encoder with an in-built:
– electronic programmer;
– 433MHz FM receiver;
The innovative DRACO system permits the gate’s movement to
be accompanied with total security and features a “variable speed
function” which can be adjusted according to the different installation
requirements up to a maximum speed of 30m per minute.

The electronic programmer is factory fitted with a graphic LCD display
(128 x 128 pixels) with backlighting in six different languages.
The menu allows you to rapidly set the system parameters including:
the sequential button mode, automatic reclosing, warning lamp
pre-flashing, intermittent warning lamp activation, indicator light and
photoelectric cell function setting etc.
The electronics card, thanks to the presence of the real-time clock,
allows you to set 10 events (shown on the display) and these events
permit you to regulate the opening and closing of the motor at
different times during the day. The appliance is fitted with a safe and
secure lever operated manual release system protected by a robust
access door with a personalised key.

SLX24DRACO MOTOR – ELECTROMECHANICAL GROUP WITH 24V

SLX24DRACO motor  is a “complete machine” which contains all the electronic and mechanical
components required to manage gate positioning and the safety functions of the
installation.
Powerful and tireless, controlled by state of the art electronics, the
automation is fitted with a powerful direct current motor backed up by a finely
tuned double gear kinematic system which reduces the stress on the motor and
structure caused by the movement of heavy gates.

Installation is possible on any structure and the unit may be fitted both to the right
as well as to the left of the passageway.
Models are available for both residential and industrial use.
The use of low voltage motors increase the performance, guarantee high efficiency,
long life and silent running.

The integrated programmer allows encoder-controlled gate positioning and selfprogramming
thus reducing installation times to a minimum and optimising the programming procedure.

Repositioning takes place automatically whenever foreign objects get in the way of
the gate as it is moving. The electronic control unit is completed by the anti-crush
and “soft start” and “soft stop” functions.

Compatible with the system INTPRG-3G/WF that allows the system parameters to
be controlled and programmed remotely.
A slave motor, connected via cable with the Cardin MODCA slot-in modules
inserted, can be installed to drive two biparting sliding gates.

Multi-decoding:
The product range is factory fitted with a multi-decoding remote control module
(system S449 – S486 – S504 – S508), a battery charger and NiMH batteries
which allow the gate to be manoeuvred even during blackouts.

GENERAL CHARACTERISTICS SLX24DRACO MOTOR

SLX24DRACO motor Power supply                        Vac          230
Frequency                                                           Hz           50
Nominal electrical input                                        A            1,7
Power input                                                         W           380
Duty cycle                                                           %            50
Drag speed                                                          m/min     30
Torque max.                                                         Nm         44
Operating temperature range                                 °C           -20°…+55
Protection grade                                                   IP           44

SLX24DRACO MOTOR DATA
Motor power supply                                              Vdc 24
Maximum power yield                                            W  250
Nominal electrical input                                         A  10

BUILT-IN RECEIVER CARD
Reception frequency                                              MHz 433.92 / 868,3
Channels                                                               No 4
Functions                                                              No  8
Stored codes                                                        No 300 / 1000

ACCESSORIES SLX24DRACO MOTOR

GEAR RACK
in polyamide with a steel core for sliding gates up to 800kg.
CREMP : VERSION WITH 6 LOWER FASTENING SLITS
30mm x 20mm, M4, 1m pieces.
CRENY : VERSION WITH 6 UPPER FASTENING SLITS
30mm x 20mm, M4, 1m pieces.

GEAR RACK
in nylon reinforced with glass fibre with a steel core for sliding gate up to 500kg.
CRENY1 : VERSION WITH 4 LOWER FASTENING SLITS
30mm x 20mm, M4, 1m pieces.

GEAR RACK
in galvanised steel for the SLX24DRACO motor and industrial installations up to 3000 kg.
SLOAC : VERSION TO BE SOLDERED
22mm x 22mm, M4, 2m pieces.
SLOAC2 : VERSION WITH FASTENING SLITS
30mm x 12mm, M4, 1m pieces.

KBNIMH-1 : KIT BATTERY CHARGER + NIMH BATTERIES
Allows the SL524 unit to work during blackouts.

KBNIMH-D : KIT BATTERY CHARGER + NIMH BATTERIES
Allows the SLX24DRACO unit to work during blackouts.

SPEED CONTROLLER
The device should be fitted to the gear rack in alignment with the motor in
order to recuperate the correct sliding action of the gate in installations that
are slightly inclined.

BLUETOOTH MODULE
The module allows the exchange of information between the motor’s
electronic control unit and the Cardin 3G/WF interface via Bluetooth or
directly between the control units and the apps CRD ONE and CRD TWO.

DATA INTERFACE MODULE VIA CABLE
The module allows the exchange of information between the motor’s electronic
control unit and the Cardin 3G/WF interface and also allows you to connect
two motors via cable in order to use the synchronised master/slave function.

Additional information

Weight 20 kg
Dimensions 0,60 × 0,40 × 0,40 m
Be the first to review “SLX24DRACO”

Your email address will not be published.

Reviews

There are no reviews yet.

See It Styled On Instagram

    No access token

Main Menu