CARDIN Control Unit type PRO and TRADE

  • CC242ETOP

    CC242ETOP – GRAPHIC DISPLAY CONTROL UNIT FOR 1 OR 2 24V MOTORS + CHARGER + NiMH BATTERIES

    CC242ETOP – ELECTRONIC CONTROL UNIT PROGRAMMERS FOR THE MANAGEMENT
    OF ONE OR TWO ENCODER-CONTROLLED MOTORS

    Electronic CC242ETOP control unit programmer for encoder-controlled 24Vdc motors that allow
    the precise position control of hinged and sliding gates fitted with a
    multi-decoding module S449 – S486 – S504 – S508.
    Batteries and battery charger in the CC242ETOPCB and
    CC242EXTOPCB versions.

    The electronic CC242ETOP control unit programmer is factory fitted with a graphic LCD display
    (128 x 128 pixels) with backlighting in six different languages.
    The menu allows you to read the number of manoeuvres carried out
    and to rapidly set the system parameters including: the sequential button
    mode, automatic reclosing, warning lamp pre-flashing, intermittent
    warning lamp activation, indicator light, photoelectric cell function setting
    and electric lock enable etc.

    CC242ETOP

    252,00 + TAX
  • INTBTC4 BLUETOOTH INTERFACE

    INTBTC4 – BLUETOOTH INTERFACE IN BOX (12 / 24Vac-dc).

    INTBTC4 – BLUETOOTH INTERFACE WITH FOUR RELAYS
    The interface with a Bluetooth module allows the control of four relays
    with NO or NC contacts. The selection dip-switches (one block per
    relay) allow you to select the relay’s activation method: impulsive, ON/
    OFF, timer controlled or remotely controlled relay activation using the
    programming calender in the Cardin multiprotocol interface Cardin
    RCQ504/508W00. The programming buttons (one per relay) allow
    you to set the activation times for the relays (from 1 s to 5 min) for
    the timer controlled mode.
    The Bluetooth module MODBT is to be ordered separately.
    Power supply 12/24Vac-dc.
    Electrical input 50mA.
    Overall dimensions 95 x 75 x 25.
    Indoor box IP20

  • KT-RQM504C1-TXQ504C2

    RQM504C2 – 433MHz STANDARD MIN 2-CHANNEL RECEIVER IN BOX (12 / 24Vac-dc).

    RQM504C2 – 433MHz STANDARD INDOOR MINI 2-CHANNEL RECEIVER IN BOX (12 / 24Vac-dc).
    The unit RQM504C2 is an electronic circuit with a 10-way terminal block; Fitted with 2 relay
    channels which can be set to ON/OFF or impulsive.
    Possibility of memorising up to 1000 codes.

    ABS indoor enclosure – IP20.
    Overall dimensions(mm) 95 x 75 x 25.

    99,00130,00 + TAX

    KT-RQM504C1-TXQ504C2

    99,00130,00 + TAX
  • PRG230M2

    PRG230M2 – ELECTRONIC MICROPROCESSOR CONTROL UNIT FOR 230V MOTORS

    PRG230M2  – ELECTRONIC PROGRAMMERS FOR THE CONTROL OF TWO 230V MOTORS
    WITH MAXIMUM POWER YIELD 470 + 470W
    Digital work time control separately memorised for each gate leaf guided by a
    6-digit display. Possible operation without mechanical travel limits. Torque setting.
    Maximum power initial thrust control, torque limitation and deceleration
    management with deceleration zone control. The appliance is fitted with an
    interface for the insertion of a standard Cardin radio receiver card.
    Suitable for the control of automatic gates and doors with two 230V motors.

    MAINS POWER SUPPLY 230Vac
    MOTOR OUTPUT 230Vac
    PROTECTION GRADE IP55
    FIREPROOFING GRADE V2
    INTERFACE FOR A STANDARD SLOT-IN RADIO CARD
    COMMAND INPUTS: TA, TC, TD, TB.
    ELECTRONIC PROGRAMMERS
    LED DISPLAY

    PRG230M2

    168,00 + TAX
  • PRG302E

    PRG302E – ELECTRONIC MICROPROCESSOR CONTROL UNIT FOR 230V MOTORS

    PRG302E  – ELECTRONIC CONTROL UNIT PROGRAMMERS FOR TWO 230V MOTORS
    WITH MAXIMUM POWER YIELD 600W.
    Digital work time control. Possible operation without mechanical travel limits.
    Command inputs: TA, TC, TD, TB. The appliance is fitted with an interface for the
    insertion of a standard Cardin radio receiver card (complete with cable glands
    Ø 2 x Ø9mm + Ø 2 x Ø16mm).
    Suitable for the control of automatic road barriers.

    PRG302E

    109,00 + TAX
  • PRG304ETC

    PRG304ETC – ELECTRONIC MICROPROCESSOR CONTROL UNIT FOR 230V MOTORS

    PRG304ETC  – ELECTRONIC CONTROL UNIT PROGRAMMERS FOR TWO 230V MOTORS
    WITH MAXIMUM POWER YIELD 650W.
    ELECTRONIC PROGRAMMER WITH EXTERNAL CONTROL BUTTONS
    Digital work time control. Command inputs: TA, TC and TB. Security inputs:
    photocells, safety edge (N.C. contact or 8.2 kΩ), digital safety edge.
    Output for a courtesy light 230Vac 300W and for a led warning light. The
    appliance is supplied with a S449, 433MHz, FM decoder.
    Suitable for the control of automatic rolling shutters.

    PRG304ETC

    156,00 + TAX
  • PRG3830CE

    PRG383OCE – INDUSTRIAL PROGRAMMER CONTROLLING ONE THREE PHASE MOTOR

    PRG383OCE – INDUSTRIAL PROGRAMMER OR CONTROL UNIT CONTROLLING ONE THREE PHASE MOTOR 230V 400V.
    INDUSTRIAL PROGRAMMER CONTROLLING ONE SINGLE PHASE / THREE PHASE MOTOR
    ELECTRONIC CONTROL UNIT, BASIC VERSION
    – 370W single phase power supply 230Vac,
    – 700W three phase power supply 400Vac.

    Automatic, semiautomatic, manual and remote control functions.
    Command inputs TA, TB, TC, TD, TAL.
    Incorporated door security switch.
    Optional external control buttons.
    Electric brake output.
    Interface for a standard slot-in radio receiver card.
    Supplied with 4 x Ø16mm cable glands.
    The control unit is supplied with 4 x Ø16mm cable glands.
    The PRG383OCE control unit is Suitable for the control of industrial gates and doors with one three
    phase motor.

    PRG3830CE

    258,00 + TAX
  • PRG383TCE

    PRG383TCE – INDUSTRIAL PROGRAMMER CONTROLLING ONE THREE PHASE MOTOR

    PRG383TCE – INDUSTRIAL PROGRAMMER OR CONTROL UNIT CONTROLLING ONE THREE PHASE MOTOR 230V 400V.
    INDUSTRIAL PROGRAMMER CONTROLLING ONE SINGLE PHASE / THREE PHASE MOTOR
    ELECTRONIC PROGRAMMER WITH EXTERNAL CONTROL BUTTONS
    – 370W single phase power supply 230Vac,
    – 700W three phase power supply 400Vac.

    Automatic, semiautomatic, manual and remote control functions.
    Command inputs TA, TB, TC, TD, TAL.
    Incorporated door security switch.
    Optional external control buttons.
    Electric brake output.
    Interface for a standard slot-in radio receiver card.
    Supplied with 4 x Ø16mm cable glands.
    The control unit is supplied with 4 x Ø16mm cable glands.
    The PRG383TCE control unit is Suitable for the control of industrial gates and doors with one three
    phase motor.

    PRG383TCE

    276,00 + TAX
  • PRG3840CE

    PRG3840CE – INDUSTRIAL PROGRAMMER CONTROLLING ONE THREE PHASE MOTOR

    PRG3840CE – INDUSTRIAL PROGRAMMER CONTROLLING ONE THREE PHASE MOTOR 400V.
    – 2200W three phase power supply 400V.
    Automatic, semiautomatic, manual and remote control functions.
    Command inputs TA, TB, TC, TD, TAL.
    Incorporated door security switch.
    Optional external control buttons.
    Electric brake output.
    Interface for a standard slot-in radio receiver card.
    Supplied with 4 x Ø16mm cable glands.
    Suitable for the control of industrial gates and doors with one three
    phase motor.

    PRG3840CE

    276,00 + TAX
  • PRG384TCE

    PRG384TCE – INDUSTRIAL PROGRAMMER CONTROLLING ONE THREE PHASE MOTOR

    PRG384TCE – INDUSTRIAL PROGRAMMER OR CONTROL UNIT CONTROLLING ONE THREE PHASE MOTOR 400V.
    ELECTRONIC PROGRAMMER WITH EXTERNAL CONTROL BUTTONS

    – 2200W three phase power supply 400V.
    Automatic, semiautomatic, manual and remote control functions.
    Command inputs TA, TB, TC, TD, TAL.
    Incorporated door security switch.
    Optional external control buttons.
    Electric brake output.
    Interface for a standard slot-in radio receiver card.
    The control unit is supplied with 4 x Ø16mm cable glands.
    The PRG384TCE control unit is Suitable for the control of industrial gates and doors with one three
    phase motor.

    PRG384TCE

    300,00 + TAX
  • PRG900

    PRG900 – GRAPHIC DISPLAY CONTROL UNIT FOR 1 OR 2 24V MOTORS

    PRG900 – ELECTRONIC CONTROL UNIT PROGRAMMERS FOR THE MANAGEMENT OF ONE OR TWO MOTORS
    Electronic PRG900 control unit programmer for the control of 24Vdc hinged gates with
    intelligent time control functions that allow you to control the position of
    the hinged and sliding gates, .

    The PRG900 control uniti fitted with a multi-decoding module S449
    – S486 – S504 – S508. Gate travel time programming is fully automatic
    and guided by a 6-digit display which allows you to visualise the number
    of manoeuvres carried out and to set several parameters such as the
    type of motor, the torque setting and the limited opening distance.

    Dip-switches allow you to set the system parameters including: the
    sequential button mode, automatic reclosing, warning lamp pre-flashing,
    intermittent warning lamp activation, indicator light and photoelectric cell
    function setting and electric lock enable.

    PRG900

    222,00 + TAX
  • RCQ433-3G

    RCQ433-3G – 433MHz RECEIVER WITH LCD DISPLAY AND 2G – 3G FUNCTIONS IN BOX (12 / 24Vac-dc).

    RCQ868-3G – 433MHz RECEIVER WITH LCD DISPLAY AND 2G – 3G FUNCTIONS (12/24Vac-dc)
    The RCQ433-3G receiver  can be fitted with up to four programmable relay
    modules MCCMORPHM1 (impulsive, ON-OFF or timer controlled).
    1 relay inserted.
    Possibility of memorising up to 3000 codes.
    USB connection and 2G-3G-WiFi module for remote user and
    activation of the output relays.
    The RCQ433/868-3G10 receivers include a 10 year subscription
    with our partner Vodafone.

    All weather box in ABS – IP55.
    Overall dimensions 135 x 175 x 85.

    RCQ433-3G

    245,00 + TAX

Main Menu