-
SLX1224REV
SLX1224REV / SLX1224 REV – ELECTROMECHANICAL UNIT WITH A 24V MOTOR
SLX1224REV AUTOMATION- FAST SELF-LOCKING UNIT ENCODER 24V MAX. 1200KG + NIMH BATTERIES FOR SLIDING AUTOMATION
The SLX1024REV motor for sliding automation gate is made up of a self-locking gear motor (with a gate drag speed of 13 metres/minute) controlled by magnetic encoder with an in-built:
– electronic programmer;
– 433MHz FM receiver;
– slot-in battery charger (SLX824CB – SLX1524CB);
– NiMH batteries (SLX824CB – SLX1524CB);
– reversible motor (SLX1224REV).The electronic programmer is factory fitted with a graphic LCD display
(128 x 128 pixels) with backlighting in six different languages.
The menu allows you to rapidly set the system parameters including:
the sequential button mode, automatic reclosing, warning lamp
pre-flashing, intermittent warning lamp activation, indicator light and
photoelectric cell function setting etc.The electronics card, thanks to the presence of the real-time clock,
allows you to set 10 events (shown on the display) and these events
permit you to regulate the opening and closing of the motor at
different times during the day within 3 weekly time bands (Mon-
Fri, Sat-Sun, Mon-Sun).The events can be enabled or disabled (during holiday periods)
either from the menu or by means of a radio channel.
The appliance is fitted with a safe and secure manual
release system activated by a personalised key.€732,00 + TAXSLX1224REV
€732,00 + TAX -
NOIRERB2
NOIRERB2 / NOIRE RB2 RECEIVER 433,92 MHz
NOIRE RB2 / NOIRERB2 -REMOTE CONTROL RECEIVER / TRASMITTER
NOIRE remote control are flexible; they can work at with fix code 433.92 MHz or with Rolling Code,
to grant maximum safety.
All NOIRE transmitters can be personalized though a family code, by using programming unit PRG NOIRE.
The refined design, sober and essential, assures the maximum ergonomic comfort.
The remote control range is completed by code selflearning receivers and programmable outputs.€60,00 + TAXNOIRERB2
€60,00 + TAX -
KT-BLSTEALTH
KT-BL STEALTH –COMPLETE KIT BL STEALTH SERIES WITH 24V MOTOR
KIT KT-BL STEALTH IN PHASE OUT –
REPLACED WITH KIT : KT-BLGRIFFE24 or KT-BLGRIFFE24TKT-BLSTEALTH / KT BLSTEALTH – COMPLETE KIT SERIES BL STEALTH – WITH ENCODER 24V MAX WEIGHT. 200KG
KT-BLSTEALTH / KT BL STEALTH USING
Particularly suited for installations with narrow columns that require the mounting
base to be less than 180mm in width and also for gates where the hinges are
not aligned to the edge of the column and with gate leaves of up to 2 metres
in length (2,5m with an electric lock) 200kg maximum weight. -
BLUES3R
BLUES3R / BLUES 3R -HYDRAULIC RAM FOR SWING GATES
BLUES3R is a heavy duty hydraulic motor, ideal for intensive use on swing gate up to 2.5 meters.
Available in reversible or irreversible version.
The elegantly classic design hides a powerful mechanism delivering smooth and silent operations.
Safe and Precise thanks to the speed and force/thrust setting independently in opening and closing and the hydraulic deceleration function.
Constant performance over time and in any condition thanks to reduced wear&tear and the possibility to maintain the oil at the ideal temperature using HOT€465,00 + TAXBLUES3R
€465,00 + TAX -
BLUES5R
BLUES5R / BLUES 5R -HYDRAULIC RAM FOR SWING GATES
BLUES5R is a heavy duty hydraulic motor, ideal for intensive use on swing gate up to 4.5 meters.
Available in reversible or irreversible version.
The elegantly classic design hides a powerful mechanism delivering smooth and silent operations.
Safe and Precise thanks to the speed and force/thrust setting independently in opening and closing and the hydraulic deceleration function.
Constant performance over time and in any condition thanks to reduced wear&tear and the possibility to maintain the oil at the ideal temperature using HOT€486,00 + TAXBLUES5R
€486,00 + TAX -
SL524CB
SL524CB / SL524 CB – ELECTROMECHANICAL UNIT WITH A 24V MOTOR
SL524CB AUTOMATION – FAST SELF-LOCKING UNIT ENCODER 24V MAX. 500KG + NIMH BATTERIES FOR SLIDING GATE
The SL524CB automation is made up of a self-locking gear motor controlled
by magnetic encoder with an in-built:
– electronic programmer;
– 433MHz FM receiver;
– slot-in battery charger;
– NiMH batteries.The electronic programmer of SL524CB automation system is factory fitted with a graphic LCD
display (16 digits x 2 lines) in six different languages that monitors
the programming stages, counts and displays the number of
manoeuvres carried out by the machine.It allows you to rapidly set the system parameters including: the sequential button mode,
automatic reclosing, warning lamp pre-flashing, flashing warning
lamp activation, indicator light and photoelectric cell function setting
and transmitter code management etc.
The appliance is fitted with a safe and secure manual release system
with a personalised knob (supplied with the appliance).€480,00 + TAXSL524CB
€480,00 + TAX -
SL524
SL524 AUTOMATION – FAST SELF-LOCKING UNIT ENCODER 24V MAX. 500KG + NIMH BATTERIES FOR SLIDING GATE
The SL524 automation is made up of a self-locking gear motor controlled
by magnetic encoder with an in-built:
– electronic programmer;
– 433MHz FM receiver;
– slot-in battery charger;
– NiMH batteries.The electronic programmer of SL524 automation system is factory fitted with a graphic LCD
display (16 digits x 2 lines) in six different languages that monitors
the programming stages, counts and displays the number of
manoeuvres carried out by the machine.It allows you to rapidly set the system parameters including: the sequential button mode,
automatic reclosing, warning lamp pre-flashing, flashing warning
lamp activation, indicator light and photoelectric cell function setting
and transmitter code management etc.
The appliance is fitted with a safe and secure manual release system
with a personalised knob (supplied with the appliance).€414,00 + TAXSL524
€414,00 + TAX -
SLX824CB
SLX824CB / SLX824 CB – ELECTROMECHANICAL UNIT WITH A 24V MOTOR
SLX824CB AUTOMATION- FAST SELF-LOCKING UNIT ENCODER 24V MAX. 800KG + NIMH BATTERIES FOR SLIDING AUTOMATION
The SLX824CB motor for sliding automation gate is made up of a self-locking gear motor (with a gate
drag speed of 13 metres/minute) controlled by magnetic encoder with an in-built:
– electronic programmer;
– 433MHz FM receiver;
– slot-in battery charger (SLX824CB – SLX1524CB);
– NiMH batteries (SLX824CB – SLX1524CB);
– reversible motor (SLX1024REV).The electronic programmer is factory fitted with a graphic LCD display
(128 x 128 pixels) with backlighting in six different languages.
The menu allows you to rapidly set the system parameters including:
the sequential button mode, automatic reclosing, warning lamp
pre-flashing, intermittent warning lamp activation, indicator light and
photoelectric cell function setting etc.The electronics card, thanks to the presence of the real-time clock,
allows you to set 10 events (shown on the display) and these events
permit you to regulate the opening and closing of the motor at
different times during the day within 3 weekly time bands (Mon-
Fri, Sat-Sun, Mon-Sun).The events can be enabled or disabled (during holiday periods)
either from the menu or by means of a radio channel.
The appliance is fitted with a safe and secure manual
release system activated by a personalised key.€600,00 + TAXSLX824CB
€600,00 + TAX -
SLX1524CB
SLX1524CB / SLX1524 CB – ELECTROMECHANICAL UNIT WITH A 24V MOTOR
SLX1524CB AUTOMATION- FAST SELF-LOCKING UNIT ENCODER 24V MAX. 1500KG + NIMH BATTERIES FOR SLIDING AUTOMATION
The SLX1524CB motor for sliding automation gate is made up of a self-locking gear motor (with a gate
drag speed of 13 metres/minute) controlled by magnetic encoder with an in-built:
– electronic programmer;
– 433MHz FM receiver;
– slot-in battery charger (SLX824CB – SLX1524CB);
– NiMH batteries (SLX824CB – SLX1524CB);
– reversible motor (SLX1024REV).The electronic programmer is factory fitted with a graphic LCD display
(128 x 128 pixels) with backlighting in six different languages.
The menu allows you to rapidly set the system parameters including:
the sequential button mode, automatic reclosing, warning lamp
pre-flashing, intermittent warning lamp activation, indicator light and
photoelectric cell function setting etc.The electronics card, thanks to the presence of the real-time clock,
allows you to set 10 events (shown on the display) and these events
permit you to regulate the opening and closing of the motor at
different times during the day within 3 weekly time bands (Mon-
Fri, Sat-Sun, Mon-Sun).The events can be enabled or disabled (during holiday periods)
either from the menu or by means of a radio channel.
The appliance is fitted with a safe and secure manual
release system activated by a personalised key.€642,00 + TAXSLX1524CB
€642,00 + TAX -
SLX3024CB
SLX3024CB – ELECTROMECHANICAL UNIT WITH A 24V MOTOR
SLX3024CB MOTOR – FAST SELF-LOCKING UNIT ENCODER 24V MAX. 3000KG + NIMH BATTERIES FOR SLIDING GATE
The SLX3024CB motor for sliding gate automation is made up of a self-locking gear motor controlled
by magnetic encoder with an in-built:
– electronic programmer;
– 433MHz FM receiver;
– slot-in battery charger;
– NiMH batteries.
The SLX3024CB MOTOR electronic programmer is factory fitted with a graphic LCD display
(128 x 128 pixels) with backlighting in six different languages.
The menu allows you to rapidly set the system parameters including:
the sequential button mode, automatic reclosing, warning lamp
pre-flashing, intermittent warning lamp activation, indicator light and
photoelectric cell function setting etc.The electronics card, thanks to the presence of the real-time clock,
allows you to set 10 events (shown on the display) and these events
permit you to regulate the opening and closing of the motor at
different times during the day within 3 weekly time bands (Mon-
Fri, Sat-Sun, Mon-Sun).
The events can be enabled or disabled (during holiday periods) either
from the menu or by means of a radio channel.
The appliance is fitted with a safe and secure manual knob
operated release system protected by a robust access door with
a personalised key.€786,00 + TAXSLX3024CB
€786,00 + TAX -
SLX24DRACO
SLX24DRACO – ELECTROMECHANICAL UNIT WITH A 24V MOTOR
SLX24DRACO MOTOR – FAST SELF-LOCKING UNIT ENCODER 24V FOR SLIDING GATE MAX. 1000KG + NIMH BATTERIES
The SLX24DRACO motor for sliding gate automation is made up of a self-locking gear motor controlled
by magnetic encoder with an in-built:
– electronic programmer;
– 433MHz FM receiver;
The innovative SLX24DRACO system permits the gate’s movement to
be accompanied with total security and features a “variable speed
function” which can be adjusted according to the different installation
requirements up to a maximum speed of 30m per minute.The electronic programmer is factory fitted with a graphic LCD display
(128 x 128 pixels) with backlighting in six different languages.
The menu allows you to rapidly set the system parameters including:
the sequential button mode, automatic reclosing, warning lamp
pre-flashing, intermittent warning lamp activation, indicator light and
photoelectric cell function setting etc.
The electronics card, thanks to the presence of the real-time clock,
allows you to set 10 events (shown on the display) and these events
permit you to regulate the opening and closing of the motor at
different times during the day. The appliance is fitted with a safe and
secure lever operated manual release system protected by a robust
access door with a personalised key.€870,00 + TAXSLX24DRACO
€870,00 + TAX -
BL3924MRCB
BL3924MRCB MASTER- ELECTROMECHANICAL GROUP WITH 24V REVERSIBLE
BL3924MRCB MASTER – SELF-LOCKING GROUP WITH HINGED ARMS FOR SWING GATES WITH ENCODER 24V MAX. 400KG + NIMH BATTERIES
BL3924MRCB MASTER Encoder-controlled self-locking Master unit with hinged arms for swing gates including:
– electronic programmer;
– 433MHz FM receiver;
– slot-in battery charger;
– NiMH batteries.
Particularly suited for installations with large size columns where the
hinges are not aligned to the edge of the column and with gate
leaves of up to 3,5 metres in length (up to 5m with a hinged arm
and an electric lock) 400kg maximum weight.
Manual release is carried out using the supplied hexagonal key after
first unlocking and removing the covering cap.
Operator arm to be ordered separately.€630,00 + TAXBL3924MRCB
€630,00 + TAX