-
LACO220A
LACO 220A / LACO220A – FLASHING LIGHT LACO220A
LACO 220A FLASHING LIGHT 230 V
LACO220A flashing light with built-in 433 MHz antenna.
LACO series flashing light with antenna.
Comes with its SUPLACO support.
Flashing 230 V power supply.FLASHING LIGHT in PHASE OUT
IT IS REPALCED BY THE NEW ICON FLASHING LIGHT
-
PRG807001
PRG807001 – ELECTRONIC MICROPROCESSOR CONTROL UNIT FOR 230V MOTORS
PRG807001 – ELECTRONIC CONTROL UNIT PROGRAMMERS FOR TWO 230V MOTORS
WITH MAXIMUM POWER YIELD 450W.
Digital work time control separately memorised for each gate leaf guided by a
6-digit display. Possible operation without mechanical travel limits. Torque setting.
Maximum power initial thrust control, torque limitation and deceleration
management with deceleration zone control. The appliance is fitted with an
interface for the insertion of a standard Cardin radio receiver card.
Suitable for the control of automatic gates and doors with two 230V motors.€153,00 + TAXPRG807001
€153,00 + TAX -
HL2524ESB
HL2524ESB – UNDERGROUND ELECTROMECHANICAL MOTOR 24V
HL2524ESB – SELF-LOCKING UNDERGROUND MOTOR WITH ENCODER 24V
SWING GATES MAX WEIGHT. 350KGHL2524ESB – SELF-LOCKING MOTOR IN PHASE OUT
REPLACED BY NEW MOTOR : HLXCORE24 MOTORELECTROMECHANICAL OPERATOR HL1824ESB
– 24V MOTOR FOR GATES
– 110° MAXIMUM OPENING ANGLE
– GATE MAX 3M
– GATE MAX 5050KG
Self-locking operator:
– fitted with a crank rod transmission system;
– supplied with a 6m connection cable;
– embedding case and Cardin electronic programmer to be ordered separately. -
CDR852A – PHOTOCELL
CDR852A – PHOTOCELL WITH SURFACE CONTAINER SHOCKPROOF IP66 RANGE 60M
CDR852A PHOTOCELL – PHOTOELECTRIC CELLS IN AN ALUMINIUM CASE IP66
Maximum range 15m – 60m
Power supply 12/24Vac-dc
Protection grade IP66
Transmitter and receiver housed in a compact waterproof aluminium
case. Highly resistant spray painting.
Double-relay with serial exchange.
Sensitivity adjustment trimmer located on the receiver (only
CDR852A).CDR852A PHOTOCELL – SURFACE-MOUNT PHOTOELECTRIC CELLS, RANGE 60m
The kit contains a pair of photoelectric cells with two pipe glands.€103,00 + TAXCDR852A – PHOTOCELL
€103,00 + TAX -
HLXCORE230 UNDERGROUND MOTOR
HLXCORE230 / HLXCORE 230 – UNDERGROUND ELECTROMECHANICAL MOTOR 230V
HLXCORE230 / HLXCORE 230 – SELF-LOCKING UNDERGROUND MOTOR WITH ENCODER 230V
SWING GATES MAX WEIGHT. 550KG
ELECTROMECHANICAL OPERATOR HLXCORE230
– 230V MOTOR FOR GATES
– 110° MAXIMUM OPENING ANGLE
– GATE MAX 3M
– GATE MAX 550KG
Self-locking operator:
– fitted with a crank rod transmission system;
– supplied with a 6m connection cable;
– embedding case and Cardin electronic programmer to be ordered separately.€345,00 + TAXHLXCORE230 UNDERGROUND MOTOR
€345,00 + TAX -
EVO 600
EVO600 / EVO 600 : GEARMOTORS FOR SLIDING GATES
EVO 600 /EVO600 : GEARMOTOR FOR SLIDING GATES 600Kg
Electromechanical gearmotor in grease lubrication.
Ideal for industrial sliding gates up to 600 Kg.
Complete with encoder, magnetic limits and built built-in control unit.
Safe and Precise thanks to the encoder and the slowing down in opening and closing.
Practical thanks to the control unit with plug-in receiver and self-learning function.
Versatile fixing plate with adjustable height and depth.
Reliable with a sturdy aluminum base treated against oxidation and all moving parts in oilbath.
Constant performance over time and in any condition thanks to reduced wear&tear
and the possibility to maintain the oil at the ideal temperature using HOT (optional).
Manual release with coded lock.EVO 600
230 V electromeccanical gearmotor in grease lubrication..
For residential/industrial sliding gates up to 600kg.€378,00 + TAXEVO 600
€378,00 + TAX -
ASY324
ASY324 – ELECTROMECHANICAL PISTON 24V FOR SWING GATES
ASY324 – IS IN PHASE OUT
MOTOR REPLACED BY THE MODEL : BLADE324ASY 324 / ASY324 – ELECTROMECHANICAL GEARMOTOR 24V FOR SWING GATES
Electromechanical operator, ideal for swing gates up to 3.5 metres.
Equipped with encoder, release with encoded key and rear swing support.
Safe thanks to the precision and sensitivity of the encoder.
Practical electrical connections and manual release.
Versatile in all models and accessories.
Reliable with sturdy structure in corrosion treated aluminium.ASY324
24 V irreversible electromechanical ASY324 GEARMOTOR .
For leafs up to 3 m. -
EDGEOC2
EDGEOC2 / EDGE OC2 RICEVENTE A 433,92 MHz
EDGEOC2 / EDGE OC2 RICEVENTE
La serie EDGE unisce la semplicità del codice fisso ad un’ottima portata radio a 433.92 MHz.
Il raffinato design, sobrio ed essenziale, dei radiocomandi assicura il massimo comfort ergonomico.
La gamma di radiocomandi completata da riceventi con autoapprendimento del codice, memoria estraibile e uscite programmabili.EDGEOC2 RICEVENTE
La serie EDGE unisce la semplicit del codice fisso ad un’ottima portata radio a 433.92 MHz.
Il raffinato design, sobrio ed essenziale, dei radiocomandi assicura il massimo comfort ergonomico.€33,00€37,00+ TAXEDGEOC2
€33,00€37,00+ TAX -
VEDO180
VEDO180 PHOTOCELL
VEDO 180 PHOTOCELL
Small size VEDO180 photocell for quick and easy installation.
The main feature is to have the internal electronics that can be oriented horizontally by 180 °.
This feature allows greater flexibility in fixing, while a particular self-centering lens eliminates any positioning errors.
The VEDO180 are equipped with automatic synchronism to eliminate interference between 2 pairs.VEDO 180 PHOTOCELL
Pair of synchronized external photocells with adjustable optics.
The infrared beam is adjustable 180° horizontally. Range 25 m.€37,00 + TAXVEDO180
€37,00 + TAX -
POS100AA
POS100AA – COLUMN IN ANODIZED ALUMINUM
POS100AA – Anodized aluminum column 110 cm high,
for two module of the APRO / VEDO and PASSO devices.
Pack of 1 pcs.CP POS Fixing kit for POS100A and POS100A, POS100AA columns.
Conf. da 1 pcs.
POS100AA It is replaced by the new CARDIN column: SEL120D
-
PRG383TCE
PRG383TCE – INDUSTRIAL PROGRAMMER CONTROLLING ONE THREE PHASE MOTOR
PRG383TCE – INDUSTRIAL PROGRAMMER OR CONTROL UNIT CONTROLLING ONE THREE PHASE MOTOR 230V 400V.
INDUSTRIAL PROGRAMMER CONTROLLING ONE SINGLE PHASE / THREE PHASE MOTOR
ELECTRONIC PROGRAMMER WITH EXTERNAL CONTROL BUTTONS
– 370W single phase power supply 230Vac,
– 700W three phase power supply 400Vac.Automatic, semiautomatic, manual and remote control functions.
Command inputs TA, TB, TC, TD, TAL.
Incorporated door security switch.
Optional external control buttons.
Electric brake output.
Interface for a standard slot-in radio receiver card.
Supplied with 4 x Ø16mm cable glands.
The control unit is supplied with 4 x Ø16mm cable glands.
The PRG383TCE control unit is Suitable for the control of industrial gates and doors with one three
phase motor.€276,00 + TAXPRG383TCE
€276,00 + TAX
