-
PRG3840CE
PRG3840CE – INDUSTRIAL PROGRAMMER CONTROLLING ONE THREE PHASE MOTOR
PRG3840CE – INDUSTRIAL PROGRAMMER CONTROLLING ONE THREE PHASE MOTOR 400V.
– 2200W three phase power supply 400V.
Automatic, semiautomatic, manual and remote control functions.
Command inputs TA, TB, TC, TD, TAL.
Incorporated door security switch.
Optional external control buttons.
Electric brake output.
Interface for a standard slot-in radio receiver card.
Supplied with 4 x Ø16mm cable glands.
Suitable for the control of industrial gates and doors with one three
phase motor.€276,00 + TAXPRG3840CE
€276,00 + TAX -
PRG384TCE
PRG384TCE – INDUSTRIAL PROGRAMMER CONTROLLING ONE THREE PHASE MOTOR
PRG384TCE – INDUSTRIAL PROGRAMMER OR CONTROL UNIT CONTROLLING ONE THREE PHASE MOTOR 400V.
ELECTRONIC PROGRAMMER WITH EXTERNAL CONTROL BUTTONS
– 2200W three phase power supply 400V.
Automatic, semiautomatic, manual and remote control functions.
Command inputs TA, TB, TC, TD, TAL.
Incorporated door security switch.
Optional external control buttons.
Electric brake output.
Interface for a standard slot-in radio receiver card.
The control unit is supplied with 4 x Ø16mm cable glands.
The PRG384TCE control unit is Suitable for the control of industrial gates and doors with one three
phase motor.€300,00 + TAXPRG384TCE
€300,00 + TAX -
PRG807001
PRG807001 – ELECTRONIC MICROPROCESSOR CONTROL UNIT FOR 230V MOTORS
PRG807001 – ELECTRONIC CONTROL UNIT PROGRAMMERS FOR TWO 230V MOTORS
WITH MAXIMUM POWER YIELD 450W.
Digital work time control separately memorised for each gate leaf guided by a
6-digit display. Possible operation without mechanical travel limits. Torque setting.
Maximum power initial thrust control, torque limitation and deceleration
management with deceleration zone control. The appliance is fitted with an
interface for the insertion of a standard Cardin radio receiver card.
Suitable for the control of automatic gates and doors with two 230V motors.€153,00 + TAXPRG807001
€153,00 + TAX -
PRG900
PRG900 – GRAPHIC DISPLAY CONTROL UNIT FOR 1 OR 2 24V MOTORS
PRG900 – ELECTRONIC CONTROL UNIT PROGRAMMERS FOR THE MANAGEMENT OF ONE OR TWO MOTORS
Electronic PRG900 control unit programmer for the control of 24Vdc hinged gates with
intelligent time control functions that allow you to control the position of
the hinged and sliding gates, .The PRG900 control uniti fitted with a multi-decoding module S449
– S486 – S504 – S508. Gate travel time programming is fully automatic
and guided by a 6-digit display which allows you to visualise the number
of manoeuvres carried out and to set several parameters such as the
type of motor, the torque setting and the limited opening distance.Dip-switches allow you to set the system parameters including: the
sequential button mode, automatic reclosing, warning lamp pre-flashing,
intermittent warning lamp activation, indicator light and photoelectric cell
function setting and electric lock enable.€222,00 + TAXPRG900
€222,00 + TAX -
PRG900CB
PRG900CB – GRAPHIC DISPLAY CONTROL UNIT FOR 1 OR 2 24V MOTORS + CHARGER + NiMH BATTERIES
PRG900CB – ELECTRONIC CONTROL UNIT PROGRAMMERS FOR THE MANAGEMENT OF ONE OR TWO MOTORS + charger and NiMH batteries
Electronic PRG900CB control unit programmer for the control of 24Vdc hinged gates with
intelligent time control functions that allow you to control the position of
the hinged and sliding gates, .The PRG900CB control uniti fitted with a multi-decoding module S449
– S486 – S504 – S508. Gate travel time programming is fully automatic
and guided by a 6-digit display which allows you to visualise the number
of manoeuvres carried out and to set several parameters such as the
type of motor, the torque setting and the limited opening distance.Dip-switches allow you to set the system parameters including: the
sequential button mode, automatic reclosing, warning lamp pre-flashing,
intermittent warning lamp activation, indicator light and photoelectric cell
function setting and electric lock enable.€283,00 + TAXPRG900CB
€283,00 + TAX -
RAP4E
RAP4E – ELECTROMECHANICAL BARRIERS UP TO 4 M
RAP4E – ELECTROMECHANICAL BARRIER UP TO 4 M
Electromechanical RAP 4E barrier 24 V, with cataphoretic treatment and painting.
With cataphoresis treatment and painting.
Complete with control unit and encoder.
Max boom length 4,25 m. Net span 4 m.
RAP 4E
This barrier has a perfect movement and can operate also in absence of power supply.
This feature thanks to the possibility of inserting 2 back up batteries.<<
Which could be placed in the dedicated housing.
A 24Vdc motor coupled with an encoder ensures perfect controlled boom movement.
The low voltage motor (24 Vdc) allows intensive use in all conditions.
Thanks to the built-in encoder, it provides a high degree of protection against crushing.€911,00 + TAXRAP4E
€911,00 + TAX -
RCQ433-3G
RCQ433-3G – 433MHz RECEIVER WITH LCD DISPLAY AND 2G – 3G FUNCTIONS IN BOX (12 / 24Vac-dc).
RCQ868-3G – 433MHz RECEIVER WITH LCD DISPLAY AND 2G – 3G FUNCTIONS (12/24Vac-dc)
The RCQ433-3G receiver can be fitted with up to four programmable relay
modules MCCMORPHM1 (impulsive, ON-OFF or timer controlled).
1 relay inserted.
Possibility of memorising up to 3000 codes.
USB connection and 2G-3G-WiFi module for remote user and
activation of the output relays.
The RCQ433/868-3G10 receivers include a 10 year subscription
with our partner Vodafone.All weather box in ABS – IP55.
Overall dimensions 135 x 175 x 85.€245,00 + TAXRCQ433-3G
€245,00 + TAX -
RCQ433-3G10
RCQ868-3G10 – 433MHz RECEIVER WITH LCD DISPLAY AND 2G – 3G + SIM VODAFONE FOR 10 YEARS
RCQ433-3G10 – 433MHz RECEIVER WITH LCD DISPLAY AND 2G – 3G FUNCTIONS (12/24Vac-dc) + SIM VODAFONE FOR 10 YEARS
The RCQ433-3G10 receivers can be fitted with up to four programmable relay
modules MCCMORPHM1 (impulsive, ON-OFF or timer controlled).
1 relay inserted.
Possibility of memorising up to 3000 codes.
USB connection and 2G-3G-WiFi module for remote user and
activation of the output relays.
The RCQ433/868-3G10 receivers include a 10 year subscription
with our partner Vodafone.All weather box in ABS – IP55.
Overall dimensions 135 x 175 x 85.€378,00 + TAXRCQ433-3G10
€378,00 + TAX -
RCQ433-WF
RCQ433-WF – RICEVITORE WIFI
RCQ433-WF RICEVITORE WIFI CON DISPLAY LCD E FUNZIONALITÀ 3G/WiFi (12/24Vac-dc)
RICEVITORE CON DISPLAY LCD E FUNZIONALITÀ 3G/WiFi (12/24Vac-dc)
Contenitore da esterno in ABS – IP55.
Dimensioni di ingombro 135 x 175 x 85.
L’unità può ospitare fino a quattro moduli di canale intercambiabili
MCCMORPHM1, programmabili in modalità impulsiva, “ON/OFF”
oppure “temporizzata”. Una strip di canale inserita. Possibilità di
memorizzare fino a 3000 codici.
Collegamento USB e modulo 2G-3G/WiFi per la gestione degli
utenti in memoria e le attivazioni delle uscite.€229,00 + TAXRCQ433-WF
€229,00 + TAX -
RCQ504NC1
RCQ504NC1 – 433MHz MODULAR RECEIVER IN BOX (12 / 24Vac-dc).
RCQ504NC1 – 433MHz MODULAR STANDARD OUTDOOR RECEIVER IN BOX (12 / 24Vac-dc).
The unit RCQ504NC1 receiver can be fitted with up to four interchangeable relay modules
MCCMORPHM1, which can be set to ON/OFF or impulsive.
1 relay inserted.
Possibility of memorising up to 1000 codes.ABS outdoor enclosure – IP55.
Overall dimensions(mm) 148 x 118 x 40.€63,00 + TAXRCQ504NC1
€63,00 + TAX -
RCQ504ND1
RCQ504ND1 – 433MHz MODULAR RECEIVER WITH DISPLAY IN BOX (12 / 24Vac-dc).
RCQ504ND1 – 433MHz MODULAR STANDARD OUTDOOR RECEIVER WITH DISPLAY IN BOX (12 / 24Vac-dc).
The unit RCQ504ND1 receiver or receivers can be fitted with up to four interchangeable relay modules
MCCMORPHM1, which can be set to ON/OFF or impulsive.
1 relay inserted.
Possibility of memorising up to 1000 codes.ABS outdoor enclosure – IP55.
Overall dimensions(mm) 148 x 118 x 40.€88,00 + TAXRCQ504ND1
€88,00 + TAX -
RCQ504W00 MULTIPROTOCOL INTERFACE
RCQ504W00 – 433MHz MULTIPROTOCOL INTERFACE IN BOX (12 / 24Vac-dc).
RCQ504W00 – 433MHz MODULAR STANDARD OUTDOOR MULTIPROTOCOL INTERFACE IN BOX (12 / 24Vac-dc).
Power supply 12/24Vac-dc.
Electrical input 20mA.
Overall dimensions 148 x 118 x 40.
All weather box in ABS – IP55.
Carrier frequency 433,92MHz – 868,3MHz.
The interface is able to decode a radio frequency signal coming
from a S504-S508 transmitter or via cable from a DKS1000T,
DKSTPT, DKSDUALT and output a Wiegand/ISO-3554 digital signal,
containing the transmitter code, in 13 different formats.
It is fitted with a USB for connection to a PC and an input that can be
connected to a timer or a switch with the aim of enabling or disabling
the interface over different time periods. Rolling Code management
with transmitter memorization on the interface.€95,00 + TAXRCQ504W00 MULTIPROTOCOL INTERFACE
€95,00 + TAX