• SPW10

    SPW 10  – SUPPLEMENTARY SOLAR PANEL KIT FOR SUN POWER

    SPW10  –SUPPLEMENTARY SOLAR PANEL KIT FOR SUN POWER
    SUPPLEMENTARY PHOTOVOLTAIC SOLAR PANEL KIT :
    Two photovoltaic panels complete with adjustable brackets.
    SPW10 Kit to increase the power capacity of SUNPOWER Power cupply system

     

     

     

     

     

     

    SPW10

    157,00 + TAX
  • SUNPOWER

    SUN POWER – KIT SOLAR PANEL POWER SUPPLY

    SUNPOWER – POWER SUPPLY KIT
    SUN POWER Solar panels for use with all 24Vdc automation.
    Two solar panels complete with adjustable brackets.
    Watertight box with batteries, command electronics and charger.
    This product uses solar energy to power automatic devices
    for gates, garage doors, and road barriers etc. situated far
    away from the mains power lines, all without needing any sort
    of excavation or bric work. SUN POWER is compatible with
    all the Cardin Trade control units for 24Vdc motors, making
    them independent, reducing electricity costs and respecting
    the environment.

     

     

     

    SUNPOWER

    282,00 + TAX
  • T1 CONTROL UNIT

    T 1 – ELECTRONIC CONTROL UNIT

    T1 – ELECTRONIC CONTROL UNIT
    Control unit for 1 roller shutter motor in 230 V.
    Plug in receiver (optional).
    T 1 Control unit for motor in handead man function.

    T1 CONTROL UNIT

    37,00 + TAX
  • T10 CONTROL UNIT

    T 10 – ELECTRONIC CONTROL UNIT

    T10 – ELECTRONIC CONTROL UNIT
    Control unit for roller shutters, with built in receiver.
    Ideal for tubular or shutter motors.
    It can also control lighting systems with 2 lamps at 230V.
    Inputs for via wire controls.
    Built-in receiver compatible with EDGE, NOIRE and FM400 series.

     


    T10 CONTROL UNIT

    55,00 + TAX
  • T101 CONTROL UNIT

    T101 ELECTRONI CONTROL UNIT 230V

    T 101 ELECTRONIC CONTROL UNIT FOR TWO 230V MOTORS
    Control unit T101 for 1 motor 230 Vdc, with torque adjustment, slowing down and encoder.
    Encoder controlled programmer with torque limitation, deceleration
    and safety device exclusion via dip-switch:
    – new external 32VA transformer;
    – third programming button;
    – flashing warning light output;
    – second channel OC2 output (contact US1);
    – terminal blocks for motor capacitor connection;
    – connection for the keypad TAST3F;
    – BSA and BSC inputs for 8K2 safety edges.

    T101 CONTROL UNIT

    115,00 + TAX
  • T124 CONTROL UNIT

    T124 –  CONTROL UNIT MOTORS 24V

    T124 / T 124 – ELECTRONIC PROGRAMMER FOR ONE OR TWO 24V MOTORS
    Control unit T124 for 1 motor 24 Vdc, with torque adjustment, slowing down and encoder
    Encoder controlled programmer with torque limitation, deceleration,
    inputs for safety edges in both the opening and closing directions,
    safety device exclusion via dip-switch:
    – second channel OC2 output (contact US1);
    – connection for the keypad TAST3F;
    – BSA and BSC inputs for 8K2 safety edges.

    T124 CONTROL UNIT

    142,00 + TAX
  • T201 ELECTRONIC CONTROL UNIT

    T201 – ELECTRONIC CONTROL UNIT

    T201 – ELECTRONIC CONTROL UNIT IS PHASE OUT
    IT IS REPLACED BY THE
    T600 – ELECTRONIC CONTROL UNIT

    T201 – ELECTRONIC CONTROL UNIT
    Control unit to controll 1/2 230V motors with torque regulation and slowing down.
    It can operate with or without encoder.
    Equipped with self-learning function.
    Connector for radio receiver OC2 series.
    Inputs for the stroke end.

  • T21B CONTROL UNIT

    T 21B – ELECTRONIC CONTROL UNIT

    T21B CONTROL UNIT – ELECTRONIC PROGRAMMER CONTROLLING ONE 230V MOTOR
    T 21B for rolling grills or rolling shutters max. 1300W.
    Supplied with a fitted RSQ504OC2 receiver card.
    Protection grade IP55.
    MAINS POWER SUPPLY 230Vac
    MOTOR OUTPUT 230Vac
    MOTOR POWER 1000W.
    PROTECTION GRADE IP55
    FIREPROOFING GRADE V2

    T21B CONTROL UNIT

    65,00 + TAX
  • T21X CONTROL UNIT

    T 21X – ELECTRONIC CONTROL UNIT

    T21X CONTROL UNIT – ELECTRONIC PROGRAMMER CONTROLLING ONE 230V MOTOR
    T 21X for rolling grills or rolling shutters max. 1300W. Ideal for tubular
    motors or rolling shutters and fitted with with torque limitation, a
    programmable 24V warning light output (flashing or continuous
    activation) and a 230V courtesy light output.
    Protection grade IP55.
    MAINS POWER SUPPLY 230Vac
    MOTOR OUTPUT 230Vac
    MOTOR POWER 1000W.
    PROTECTION GRADE IP55
    FIREPROOFING GRADE V2

    T21X CONTROL UNIT

    70,00 + TAX
  • T224 CONTROL UNIT

    T224 –  CONTROL UNIT MOTORS 24V

    T224 – CONTROL UNIT IN PHASE OUT
    REPLACED BY THE : T624

    T224 / T 224 – ELECTRONIC PROGRAMMER FOR ONE OR TWO 24V MOTORS
    Control unit T224 for 2 motors 24 Vdc, with torque adjustment, slowing down and encoder
    Encoder controlled programmer with torque limitation, deceleration,
    inputs for safety edges in both the opening and closing directions,
    safety device exclusion via dip-switch:
    – second channel OC2 output (contact US1);
    – connection for the keypad TAST3F;
    – BSA and BSC inputs for 8K2 safety edges.

    T224 CONTROL UNIT

    186,00 + TAX
  • T31 CONTROL UNIT

    T 31 – ELECTRONIC CONTROL UNIT

    T31 – ELECTRONIC CONTROL UNIT
    Control unit for 1 roller shutter motor in 230 V.
    Plug in receiver (optional).
    T31 Control unit like T21, but with limit switch inputs,
    motor force adjustment and courtesy light output.
    MAINS POWER SUPPLY 230Vac
    MOTOR OUTPUT 230Vac
    MOTOR POWER 1000W.
    PROTECTION GRADE IP55
    FIREPROOFING GRADE V2

  • T400 CONTROL UNIT

    T400 ELECTRONI CONTROL UNIT 230V

    T400 ELECTRONIC CONTROL UNIT FOR ONE 400 V THREEPHASE MOTOR OR ONE SINGLEPHASE 230V MOTOR
    CONTROL UNIT T 400 Operation with or without encoder control.
    Complete with self-learning function, two separate connections for
    balanced safety edges (EN 12978). Connection for slot-in radio card. Travel limit inputs.
    – new external 32VA transformer;
    – third programming button;
    – flashing warning light output;
    – second channel OC2 output (contact US1);
    – terminal blocks for motor capacitor connection;
    – connection for the keypad TAST3F;
    – BSA and BSC inputs for 8K2 safety edges.

    T400 CONTROL UNIT

    214,00 + TAX

Main Menu