Control units
-
T1 CONTROL UNIT
T 1 – ELECTRONIC CONTROL UNIT
T1 – ELECTRONIC CONTROL UNIT
Control unit for 1 roller shutter motor in 230 V.
Plug in receiver (optional).
T 1 Control unit for motor in handead man function.€40,00 + TAXT1 CONTROL UNIT
€40,00 + TAX -
T600 CONTROL UNIT
T600 ELECTRONI CONTROL UNIT 230V
T 600 ELECTRONIC CONTROL UNIT FOR TWO 230V MOTORS
Control unit T600 for 1/2 motors 230 Vdc, with torque adjustment, slowing down and encoder.
Encoder controlled programmer with torque limitation, deceleration
and safety device exclusion via dip-switch:
– new external 32VA transformer;
– third programming button;
– flashing warning light output;
– second channel OC2 output (contact US1);
– terminal blocks for motor capacitor connection;
– connection for the keypad TAST3F;
– BSA and BSC inputs for 8K2 safety edges.€176,00 + TAXT600 CONTROL UNIT
€176,00 + TAX -
T624 CONTROL UNIT
T624 – CONTROL UNIT MOTORS 24V
T624 / T 624 – ELECTRONIC PROGRAMMER FOR ONE OR TWO 24V MOTORS
Control unit T624 for 2 motors 24 Vdc, with torque adjustment, slowing down and encoder
Encoder controlled programmer with torque limitation, deceleration,
inputs for safety edges in both the opening and closing directions,
safety device exclusion via dip-switch:
– second channel OC2 output (contact US1);
– connection for the keypad TAST3F;
– BSA and BSC inputs for 8K2 safety edges.MAINS POWER SUPPLY 230Vac
MOTOR OUTPUT 24Vdc
PROTECTION GRADE IP55
FIREPROOFING GRADE V2
AUTOMATIC GATE/DOOR PROGRAMMING€199,00 + TAXT624 CONTROL UNIT
€199,00 + TAX -
T201 ELECTRONIC CONTROL UNIT
T201 – ELECTRONIC CONTROL UNIT
T201 – ELECTRONIC CONTROL UNIT IS PHASE OUT
IT IS REPLACED BY THE T600 – ELECTRONIC CONTROL UNITT201 – ELECTRONIC CONTROL UNIT
Control unit to controll 1/2 230V motors with torque regulation and slowing down.
It can operate with or without encoder.
Equipped with self-learning function.
Connector for radio receiver OC2 series.
Inputs for the stroke end.€176,00 + TAXT201 ELECTRONIC CONTROL UNIT
€176,00 + TAX -
CC242ETOP
CC242ETOP – GRAPHIC DISPLAY CONTROL UNIT FOR 1 OR 2 24V MOTORS + CHARGER + NiMH BATTERIES
CC242ETOP – ELECTRONIC CONTROL UNIT PROGRAMMERS FOR THE MANAGEMENT
OF ONE OR TWO ENCODER-CONTROLLED MOTORSElectronic CC242ETOP control unit programmer for encoder-controlled 24Vdc motors that allow
the precise position control of hinged and sliding gates fitted with a
multi-decoding module S449 – S486 – S504 – S508.
Batteries and battery charger in the CC242ETOPCB and
CC242EXTOPCB versions.The electronic CC242ETOP control unit programmer is factory fitted with a graphic LCD display
(128 x 128 pixels) with backlighting in six different languages.
The menu allows you to read the number of manoeuvres carried out
and to rapidly set the system parameters including: the sequential button
mode, automatic reclosing, warning lamp pre-flashing, intermittent
warning lamp activation, indicator light, photoelectric cell function setting
and electric lock enable etc.€252,00 + TAXCC242ETOP
€252,00 + TAX -
CC242ETOPCB
CC242ETOPCB – GRAPHIC DISPLAY CONTROL UNIT FOR 1 OR 2 24V MOTORS + CHARGER + NiMH BATTERIES
CC242ETOPCB – ELECTRONIC CONTROL UNIT PROGRAMMERS FOR THE MANAGEMENT
OF ONE OR TWO ENCODER-CONTROLLED MOTORS + charger and NiMH batteriesElectronic CC242ETOPCB control unit programmer for encoder-controlled 24Vdc motors that allow
the precise position control of hinged and sliding gates fitted with a
multi-decoding module S449 – S486 – S504 – S508.
Batteries and battery charger in the CC242ETOPCB and
CC242EXTOPCB versions.The electronic CC242ETOPCB control unit programmer is factory fitted with a graphic LCD display
(128 x 128 pixels) with backlighting in six different languages.
The menu allows you to read the number of manoeuvres carried out
and to rapidly set the system parameters including: the sequential button
mode, automatic reclosing, warning lamp pre-flashing, intermittent
warning lamp activation, indicator light, photoelectric cell function setting
and electric lock enable etc.€321,00 + TAXCC242ETOPCB
€321,00 + TAX -
CC242EXTOPCB
CC242EXTOPCB – GRAPHIC DISPLAY CONTROL UNIT FOR 1 OR 2 24V MOTORS + CHARGER + NiMH BATTERIES
CC242EXTOPCB – ELECTRONIC CONTROL UNIT PROGRAMMERS FOR THE MANAGEMENT
OF ONE OR TWO ENCODER-CONTROLLED MOTORS + charger and NiMH batteriesElectronic CC242EXTOPCB control unit programmer for encoder-controlled 24Vdc motors that allow
the precise position control of hinged and sliding gates fitted with a
multi-decoding module S449 – S486 – S504 – S508.
Batteries and battery charger in the CC242ETOPCB and
CC242EXTOPCB versions.The electronic CC242EXTOPCB control unit programmer is factory fitted with a graphic LCD display
(128 x 128 pixels) with backlighting in six different languages.
The menu allows you to read the number of manoeuvres carried out
and to rapidly set the system parameters including: the sequential button
mode, automatic reclosing, warning lamp pre-flashing, intermittent
warning lamp activation, indicator light, photoelectric cell function setting
and electric lock enable etc.€336,00 + TAXCC242EXTOPCB
€336,00 + TAX -
PRG900
PRG900 – GRAPHIC DISPLAY CONTROL UNIT FOR 1 OR 2 24V MOTORS
PRG900 – ELECTRONIC CONTROL UNIT PROGRAMMERS FOR THE MANAGEMENT OF ONE OR TWO MOTORS
Electronic PRG900 control unit programmer for the control of 24Vdc hinged gates with
intelligent time control functions that allow you to control the position of
the hinged and sliding gates, .The PRG900 control uniti fitted with a multi-decoding module S449
– S486 – S504 – S508. Gate travel time programming is fully automatic
and guided by a 6-digit display which allows you to visualise the number
of manoeuvres carried out and to set several parameters such as the
type of motor, the torque setting and the limited opening distance.Dip-switches allow you to set the system parameters including: the
sequential button mode, automatic reclosing, warning lamp pre-flashing,
intermittent warning lamp activation, indicator light and photoelectric cell
function setting and electric lock enable.€222,00 + TAXPRG900
€222,00 + TAX -
PRG900CB
PRG900CB – GRAPHIC DISPLAY CONTROL UNIT FOR 1 OR 2 24V MOTORS + CHARGER + NiMH BATTERIES
PRG900CB – ELECTRONIC CONTROL UNIT PROGRAMMERS FOR THE MANAGEMENT OF ONE OR TWO MOTORS + charger and NiMH batteries
Electronic PRG900CB control unit programmer for the control of 24Vdc hinged gates with
intelligent time control functions that allow you to control the position of
the hinged and sliding gates, .The PRG900CB control uniti fitted with a multi-decoding module S449
– S486 – S504 – S508. Gate travel time programming is fully automatic
and guided by a 6-digit display which allows you to visualise the number
of manoeuvres carried out and to set several parameters such as the
type of motor, the torque setting and the limited opening distance.Dip-switches allow you to set the system parameters including: the
sequential button mode, automatic reclosing, warning lamp pre-flashing,
intermittent warning lamp activation, indicator light and photoelectric cell
function setting and electric lock enable.€283,00 + TAXPRG900CB
€283,00 + TAX -
PRG304E
PRG304E – ELECTRONIC MICROPROCESSOR CONTROL UNIT FOR 230V MOTORS
PRG304E – ELECTRONIC CONTROL UNIT PROGRAMMERS FOR TWO 230V MOTORS
WITH MAXIMUM POWER YIELD 650W.
ELECTRONIC CONTROL UNIT, BASIC VERSION
Digital work time control. Command inputs: TA, TC and TB. Security inputs:
photocells, safety edge (N.C. contact or 8.2 kΩ), digital safety edge.
Output for a courtesy light 230Vac 300W and for a led warning light. The
appliance is supplied with a S449, 433MHz, FM decoder.
Suitable for the control of automatic rolling shutters.€121,00 + TAXPRG304E
€121,00 + TAX -
PRG304ETC
PRG304ETC – ELECTRONIC MICROPROCESSOR CONTROL UNIT FOR 230V MOTORS
PRG304ETC – ELECTRONIC CONTROL UNIT PROGRAMMERS FOR TWO 230V MOTORS
WITH MAXIMUM POWER YIELD 650W.
ELECTRONIC PROGRAMMER WITH EXTERNAL CONTROL BUTTONS
Digital work time control. Command inputs: TA, TC and TB. Security inputs:
photocells, safety edge (N.C. contact or 8.2 kΩ), digital safety edge.
Output for a courtesy light 230Vac 300W and for a led warning light. The
appliance is supplied with a S449, 433MHz, FM decoder.
Suitable for the control of automatic rolling shutters.€156,00 + TAXPRG304ETC
€156,00 + TAX -
PRG302E
PRG302E – ELECTRONIC MICROPROCESSOR CONTROL UNIT FOR 230V MOTORS
PRG302E – ELECTRONIC CONTROL UNIT PROGRAMMERS FOR TWO 230V MOTORS
WITH MAXIMUM POWER YIELD 600W.
Digital work time control. Possible operation without mechanical travel limits.
Command inputs: TA, TC, TD, TB. The appliance is fitted with an interface for the
insertion of a standard Cardin radio receiver card (complete with cable glands
Ø 2 x Ø9mm + Ø 2 x Ø16mm).
Suitable for the control of automatic road barriers.€109,00 + TAXPRG302E
€109,00 + TAX