Control Units Command and telemetry

  • T10 CONTROL UNIT

    T 10 – ELECTRONIC CONTROL UNIT

    T10 – ELECTRONIC CONTROL UNIT
    Control unit for roller shutters, with built in receiver.
    Ideal for tubular or shutter motors.
    It can also control lighting systems with 2 lamps at 230V.
    Inputs for via wire controls.
    Built-in receiver compatible with EDGE, NOIRE and FM400 series.

     


    T10 CONTROL UNIT

    60,00 + TAX
  • T101 CONTROL UNIT

    T101 ELECTRONI CONTROL UNIT 230V

    T 101 ELECTRONIC CONTROL UNIT FOR TWO 230V MOTORS
    Control unit T101 for 1 motor 230 Vdc, with torque adjustment, slowing down and encoder.
    Encoder controlled programmer with torque limitation, deceleration
    and safety device exclusion via dip-switch:
    – new external 32VA transformer;
    – third programming button;
    – flashing warning light output;
    – second channel OC2 output (contact US1);
    – terminal blocks for motor capacitor connection;
    – connection for the keypad TAST3F;
    – BSA and BSC inputs for 8K2 safety edges.

    T101 CONTROL UNIT

    122,00 + TAX
  • T124 CONTROL UNIT

    T124 –  CONTROL UNIT MOTORS 24V

    T124 / T 124 – ELECTRONIC PROGRAMMER FOR ONE OR TWO 24V MOTORS
    Control unit T124 for 1 motor 24 Vdc, with torque adjustment, slowing down and encoder
    Encoder controlled programmer with torque limitation, deceleration,
    inputs for safety edges in both the opening and closing directions,
    safety device exclusion via dip-switch:
    – second channel OC2 output (contact US1);
    – connection for the keypad TAST3F;
    – BSA and BSC inputs for 8K2 safety edges.

    T124 CONTROL UNIT

    152,00 + TAX
  • T201 ELECTRONIC CONTROL UNIT

    T201 – ELECTRONIC CONTROL UNIT

    T201 – ELECTRONIC CONTROL UNIT IS PHASE OUT
    IT IS REPLACED BY THE
    T600 – ELECTRONIC CONTROL UNIT

    T201 – ELECTRONIC CONTROL UNIT
    Control unit to controll 1/2 230V motors with torque regulation and slowing down.
    It can operate with or without encoder.
    Equipped with self-learning function.
    Connector for radio receiver OC2 series.
    Inputs for the stroke end.

  • T224 CONTROL UNIT

    T224 –  CONTROL UNIT MOTORS 24V

    T224 – CONTROL UNIT IN PHASE OUT
    REPLACED BY THE : T624

    T224 / T 224 – ELECTRONIC PROGRAMMER FOR ONE OR TWO 24V MOTORS
    Control unit T224 for 2 motors 24 Vdc, with torque adjustment, slowing down and encoder
    Encoder controlled programmer with torque limitation, deceleration,
    inputs for safety edges in both the opening and closing directions,
    safety device exclusion via dip-switch:
    – second channel OC2 output (contact US1);
    – connection for the keypad TAST3F;
    – BSA and BSC inputs for 8K2 safety edges.

    T224 CONTROL UNIT

    199,00 + TAX
  • T400 CONTROL UNIT

    T400 ELECTRONI CONTROL UNIT 230V

    T400 ELECTRONIC CONTROL UNIT FOR ONE 400 V THREEPHASE MOTOR OR ONE SINGLEPHASE 230V MOTOR
    CONTROL UNIT T 400 Operation with or without encoder control.
    Complete with self-learning function, two separate connections for
    balanced safety edges (EN 12978). Connection for slot-in radio card. Travel limit inputs.
    – new external 32VA transformer;
    – third programming button;
    – flashing warning light output;
    – second channel OC2 output (contact US1);
    – terminal blocks for motor capacitor connection;
    – connection for the keypad TAST3F;
    – BSA and BSC inputs for 8K2 safety edges.

    T400 CONTROL UNIT

    229,00 + TAX

Main Menu