CARDIN Control Unit type PRO and TRADE
-
CC242ETOP
CC242ETOP – GRAPHIC DISPLAY CONTROL UNIT FOR 1 OR 2 24V MOTORS + CHARGER + NiMH BATTERIES
CC242ETOP – ELECTRONIC CONTROL UNIT PROGRAMMERS FOR THE MANAGEMENT
OF ONE OR TWO ENCODER-CONTROLLED MOTORSElectronic CC242ETOP control unit programmer for encoder-controlled 24Vdc motors that allow
the precise position control of hinged and sliding gates fitted with a
multi-decoding module S449 – S486 – S504 – S508.
Batteries and battery charger in the CC242ETOPCB and
CC242EXTOPCB versions.The electronic CC242ETOP control unit programmer is factory fitted with a graphic LCD display
(128 x 128 pixels) with backlighting in six different languages.
The menu allows you to read the number of manoeuvres carried out
and to rapidly set the system parameters including: the sequential button
mode, automatic reclosing, warning lamp pre-flashing, intermittent
warning lamp activation, indicator light, photoelectric cell function setting
and electric lock enable etc.€252,00 + TAXCC242ETOP
€252,00 + TAX -
T201 ELECTRONIC CONTROL UNIT
T201 – ELECTRONIC CONTROL UNIT
T201 – ELECTRONIC CONTROL UNIT IS PHASE OUT
IT IS REPLACED BY THE T600 – ELECTRONIC CONTROL UNITT201 – ELECTRONIC CONTROL UNIT
Control unit to controll 1/2 230V motors with torque regulation and slowing down.
It can operate with or without encoder.
Equipped with self-learning function.
Connector for radio receiver OC2 series.
Inputs for the stroke end.€176,00 + TAXT201 ELECTRONIC CONTROL UNIT
€176,00 + TAX -
T400 CONTROL UNIT
T400 ELECTRONI CONTROL UNIT 230V
T400 ELECTRONIC CONTROL UNIT FOR ONE 400 V THREEPHASE MOTOR OR ONE SINGLEPHASE 230V MOTOR
CONTROL UNIT T 400 Operation with or without encoder control.
Complete with self-learning function, two separate connections for
balanced safety edges (EN 12978). Connection for slot-in radio card. Travel limit inputs.
– new external 32VA transformer;
– third programming button;
– flashing warning light output;
– second channel OC2 output (contact US1);
– terminal blocks for motor capacitor connection;
– connection for the keypad TAST3F;
– BSA and BSC inputs for 8K2 safety edges.€229,00 + TAXT400 CONTROL UNIT
€229,00 + TAX -
T124 CONTROL UNIT
T124 – CONTROL UNIT MOTORS 24V
T124 / T 124 – ELECTRONIC PROGRAMMER FOR ONE OR TWO 24V MOTORS
Control unit T124 for 1 motor 24 Vdc, with torque adjustment, slowing down and encoder
Encoder controlled programmer with torque limitation, deceleration,
inputs for safety edges in both the opening and closing directions,
safety device exclusion via dip-switch:
– second channel OC2 output (contact US1);
– connection for the keypad TAST3F;
– BSA and BSC inputs for 8K2 safety edges.€152,00 + TAXT124 CONTROL UNIT
€152,00 + TAX -
T101 CONTROL UNIT
T101 ELECTRONI CONTROL UNIT 230V
T 101 ELECTRONIC CONTROL UNIT FOR TWO 230V MOTORS
Control unit T101 for 1 motor 230 Vdc, with torque adjustment, slowing down and encoder.
Encoder controlled programmer with torque limitation, deceleration
and safety device exclusion via dip-switch:
– new external 32VA transformer;
– third programming button;
– flashing warning light output;
– second channel OC2 output (contact US1);
– terminal blocks for motor capacitor connection;
– connection for the keypad TAST3F;
– BSA and BSC inputs for 8K2 safety edges.€122,00 + TAXT101 CONTROL UNIT
€122,00 + TAX -
T224 CONTROL UNIT
T224 – CONTROL UNIT MOTORS 24V
T224 – CONTROL UNIT IN PHASE OUT
REPLACED BY THE : T624T224 / T 224 – ELECTRONIC PROGRAMMER FOR ONE OR TWO 24V MOTORS
Control unit T224 for 2 motors 24 Vdc, with torque adjustment, slowing down and encoder
Encoder controlled programmer with torque limitation, deceleration,
inputs for safety edges in both the opening and closing directions,
safety device exclusion via dip-switch:
– second channel OC2 output (contact US1);
– connection for the keypad TAST3F;
– BSA and BSC inputs for 8K2 safety edges.€199,00 + TAXT224 CONTROL UNIT
€199,00 + TAX