Equipment of the professional line
They are devices equipped with additional functions
-
PRG304E
PRG304E – ELECTRONIC MICROPROCESSOR CONTROL UNIT FOR 230V MOTORS
PRG304E – ELECTRONIC CONTROL UNIT PROGRAMMERS FOR TWO 230V MOTORS
WITH MAXIMUM POWER YIELD 650W.
ELECTRONIC CONTROL UNIT, BASIC VERSION
Digital work time control. Command inputs: TA, TC and TB. Security inputs:
photocells, safety edge (N.C. contact or 8.2 kΩ), digital safety edge.
Output for a courtesy light 230Vac 300W and for a led warning light. The
appliance is supplied with a S449, 433MHz, FM decoder.
Suitable for the control of automatic rolling shutters.€121,00 + TAXPRG304E
€121,00 + TAX -
PRG900CB
PRG900CB – GRAPHIC DISPLAY CONTROL UNIT FOR 1 OR 2 24V MOTORS + CHARGER + NiMH BATTERIES
PRG900CB – ELECTRONIC CONTROL UNIT PROGRAMMERS FOR THE MANAGEMENT OF ONE OR TWO MOTORS + charger and NiMH batteries
Electronic PRG900CB control unit programmer for the control of 24Vdc hinged gates with
intelligent time control functions that allow you to control the position of
the hinged and sliding gates, .The PRG900CB control uniti fitted with a multi-decoding module S449
– S486 – S504 – S508. Gate travel time programming is fully automatic
and guided by a 6-digit display which allows you to visualise the number
of manoeuvres carried out and to set several parameters such as the
type of motor, the torque setting and the limited opening distance.Dip-switches allow you to set the system parameters including: the
sequential button mode, automatic reclosing, warning lamp pre-flashing,
intermittent warning lamp activation, indicator light and photoelectric cell
function setting and electric lock enable.€283,00 + TAXPRG900CB
€283,00 + TAX -
PRG900
PRG900 – GRAPHIC DISPLAY CONTROL UNIT FOR 1 OR 2 24V MOTORS
PRG900 – ELECTRONIC CONTROL UNIT PROGRAMMERS FOR THE MANAGEMENT OF ONE OR TWO MOTORS
Electronic PRG900 control unit programmer for the control of 24Vdc hinged gates with
intelligent time control functions that allow you to control the position of
the hinged and sliding gates, .The PRG900 control uniti fitted with a multi-decoding module S449
– S486 – S504 – S508. Gate travel time programming is fully automatic
and guided by a 6-digit display which allows you to visualise the number
of manoeuvres carried out and to set several parameters such as the
type of motor, the torque setting and the limited opening distance.Dip-switches allow you to set the system parameters including: the
sequential button mode, automatic reclosing, warning lamp pre-flashing,
intermittent warning lamp activation, indicator light and photoelectric cell
function setting and electric lock enable.€222,00 + TAXPRG900
€222,00 + TAX -
CC242EXTOPCB
CC242EXTOPCB – GRAPHIC DISPLAY CONTROL UNIT FOR 1 OR 2 24V MOTORS + CHARGER + NiMH BATTERIES
CC242EXTOPCB – ELECTRONIC CONTROL UNIT PROGRAMMERS FOR THE MANAGEMENT
OF ONE OR TWO ENCODER-CONTROLLED MOTORS + charger and NiMH batteriesElectronic CC242EXTOPCB control unit programmer for encoder-controlled 24Vdc motors that allow
the precise position control of hinged and sliding gates fitted with a
multi-decoding module S449 – S486 – S504 – S508.
Batteries and battery charger in the CC242ETOPCB and
CC242EXTOPCB versions.The electronic CC242EXTOPCB control unit programmer is factory fitted with a graphic LCD display
(128 x 128 pixels) with backlighting in six different languages.
The menu allows you to read the number of manoeuvres carried out
and to rapidly set the system parameters including: the sequential button
mode, automatic reclosing, warning lamp pre-flashing, intermittent
warning lamp activation, indicator light, photoelectric cell function setting
and electric lock enable etc.€336,00 + TAXCC242EXTOPCB
€336,00 + TAX -
CC242ETOPCB
CC242ETOPCB – GRAPHIC DISPLAY CONTROL UNIT FOR 1 OR 2 24V MOTORS + CHARGER + NiMH BATTERIES
CC242ETOPCB – ELECTRONIC CONTROL UNIT PROGRAMMERS FOR THE MANAGEMENT
OF ONE OR TWO ENCODER-CONTROLLED MOTORS + charger and NiMH batteriesElectronic CC242ETOPCB control unit programmer for encoder-controlled 24Vdc motors that allow
the precise position control of hinged and sliding gates fitted with a
multi-decoding module S449 – S486 – S504 – S508.
Batteries and battery charger in the CC242ETOPCB and
CC242EXTOPCB versions.The electronic CC242ETOPCB control unit programmer is factory fitted with a graphic LCD display
(128 x 128 pixels) with backlighting in six different languages.
The menu allows you to read the number of manoeuvres carried out
and to rapidly set the system parameters including: the sequential button
mode, automatic reclosing, warning lamp pre-flashing, intermittent
warning lamp activation, indicator light, photoelectric cell function setting
and electric lock enable etc.€321,00 + TAXCC242ETOPCB
€321,00 + TAX -
CC242ETOP
CC242ETOP – GRAPHIC DISPLAY CONTROL UNIT FOR 1 OR 2 24V MOTORS + CHARGER + NiMH BATTERIES
CC242ETOP – ELECTRONIC CONTROL UNIT PROGRAMMERS FOR THE MANAGEMENT
OF ONE OR TWO ENCODER-CONTROLLED MOTORSElectronic CC242ETOP control unit programmer for encoder-controlled 24Vdc motors that allow
the precise position control of hinged and sliding gates fitted with a
multi-decoding module S449 – S486 – S504 – S508.
Batteries and battery charger in the CC242ETOPCB and
CC242EXTOPCB versions.The electronic CC242ETOP control unit programmer is factory fitted with a graphic LCD display
(128 x 128 pixels) with backlighting in six different languages.
The menu allows you to read the number of manoeuvres carried out
and to rapidly set the system parameters including: the sequential button
mode, automatic reclosing, warning lamp pre-flashing, intermittent
warning lamp activation, indicator light, photoelectric cell function setting
and electric lock enable etc.€252,00 + TAXCC242ETOP
€252,00 + TAX -
HLBOXC
HLBOXC : HOT-GALVANIZED FOUNDATION GEAR MOTOR IN CATAPHORESIS + SBLSHL RELEASE WITH LEVER
HLBOXC Foundation box or HEMBEDDED CASE for underground electromechanical gearmotor 24 V 230 V ideal for swing gates up to 3 meters.
Equipped with encoder and easy release.
Safe thanks to the precision and sensitivity of the encoder and to the slowdowns in opening and closing.
Practical thanks to the control unit with quick connection and self-learning receiver.
Adjustable limit switches integrated in the case.
Reliable with perfect watertightness and solid and robust mechanics.HLBOXC EMBEDDED CASE
Complete with connection lever and adjustable mechanical travel limits.
Foundation box in hot-dip galvanized cataphoresis complete with connection
levers and mechanical stops adjustable in opening and closing.+ SBLSHL Release with lever for HLBOX or HLBOXI foundation boxes
All versions are fitted with a stainless steel cover.€211,00 + TAXHLBOXC
€211,00 + TAX -
HLBOX
HLBOX : HOT-GALVANIZED FOUNDATION GEAR MOTOR IN CATAPHORESIS + SBLSHL RELEASE WITH LEVER
HLBOX Foundation box or HEMBEDDED CASE for underground electromechanical gearmotor 24 V 230 V ideal for swing gates up to 3 meters.
Equipped with encoder and easy release.
Safe thanks to the precision and sensitivity of the encoder and to the slowdowns in opening and closing.
Practical thanks to the control unit with quick connection and self-learning receiver.
Adjustable limit switches integrated in the case.
Reliable with perfect watertightness and solid and robust mechanics.HLBOX EMBEDDED CASE
Complete with connection lever and adjustable mechanical travel limits.
Foundation box in hot-dip galvanized cataphoresis complete with connection
levers and mechanical stops adjustable in opening and closing.+ SBLSHL Release with lever for HLBOX or HLBOXI foundation boxes
All versions are fitted with a stainless steel cover.€189,00 + TAXHLBOX
€189,00 + TAX -
HLBOXI
HLBOXI : MOTORIDUTTORE INTERRATO CASSA DI FONDAZIONE IN ACCIAIO INOX
Motoriduttore elettromeccanico interrato 24 V 230 V ideale per ante battenti fino a 3 metri.
Equipaggiato con encoder e sblocco facilitato.
Sicuro grazie alla precisione e sensibilità dell’encoder ed ai rallentamenti in apertura e chiusura.
Pratico grazie alla centrale con ricevente ad innesto rapido ed auto-apprendimento.
Finecorsa regolabili integrati nella cassa.
Affidabile con perfetta tenuta all’acqua ed una meccanica solida e robusta.HLBOXI
Cassa di fondazione in acciaio INOX completa di leve di collegamento e fermi meccanici regolabili in apertura e chiusura.€343,00 + TAXHLBOXI
€343,00 + TAX