Equipment of the professional line
They are devices equipped with additional functions
-
PRG807001
PRG807001 – ELECTRONIC MICROPROCESSOR CONTROL UNIT FOR 230V MOTORS
PRG807001 – ELECTRONIC CONTROL UNIT PROGRAMMERS FOR TWO 230V MOTORS
WITH MAXIMUM POWER YIELD 450W.
Digital work time control separately memorised for each gate leaf guided by a
6-digit display. Possible operation without mechanical travel limits. Torque setting.
Maximum power initial thrust control, torque limitation and deceleration
management with deceleration zone control. The appliance is fitted with an
interface for the insertion of a standard Cardin radio receiver card.
Suitable for the control of automatic gates and doors with two 230V motors.€153,00 + TAXPRG807001
€153,00 + TAX -
HL2524ESB
HL2524ESB – UNDERGROUND ELECTROMECHANICAL MOTOR 24V
HL2524ESB – SELF-LOCKING UNDERGROUND MOTOR WITH ENCODER 24V
SWING GATES MAX WEIGHT. 350KGHL2524ESB – SELF-LOCKING MOTOR IN PHASE OUT
REPLACED BY NEW MOTOR : HLXCORE24 MOTORELECTROMECHANICAL OPERATOR HL1824ESB
– 24V MOTOR FOR GATES
– 110° MAXIMUM OPENING ANGLE
– GATE MAX 3M
– GATE MAX 5050KG
Self-locking operator:
– fitted with a crank rod transmission system;
– supplied with a 6m connection cable;
– embedding case and Cardin electronic programmer to be ordered separately. -
CDR852A – PHOTOCELL
CDR852A – PHOTOCELL WITH SURFACE CONTAINER SHOCKPROOF IP66 RANGE 60M
CDR852A PHOTOCELL – PHOTOELECTRIC CELLS IN AN ALUMINIUM CASE IP66
Maximum range 15m – 60m
Power supply 12/24Vac-dc
Protection grade IP66
Transmitter and receiver housed in a compact waterproof aluminium
case. Highly resistant spray painting.
Double-relay with serial exchange.
Sensitivity adjustment trimmer located on the receiver (only
CDR852A).CDR852A PHOTOCELL – SURFACE-MOUNT PHOTOELECTRIC CELLS, RANGE 60m
The kit contains a pair of photoelectric cells with two pipe glands.€103,00 + TAXCDR852A – PHOTOCELL
€103,00 + TAX -
HLXCORE230 UNDERGROUND MOTOR
HLXCORE230 / HLXCORE 230 – UNDERGROUND ELECTROMECHANICAL MOTOR 230V
HLXCORE230 / HLXCORE 230 – SELF-LOCKING UNDERGROUND MOTOR WITH ENCODER 230V
SWING GATES MAX WEIGHT. 550KG
ELECTROMECHANICAL OPERATOR HLXCORE230
– 230V MOTOR FOR GATES
– 110° MAXIMUM OPENING ANGLE
– GATE MAX 3M
– GATE MAX 550KG
Self-locking operator:
– fitted with a crank rod transmission system;
– supplied with a 6m connection cable;
– embedding case and Cardin electronic programmer to be ordered separately.€345,00 + TAXHLXCORE230 UNDERGROUND MOTOR
€345,00 + TAX -
PRG383TCE
PRG383TCE – INDUSTRIAL PROGRAMMER CONTROLLING ONE THREE PHASE MOTOR
PRG383TCE – INDUSTRIAL PROGRAMMER OR CONTROL UNIT CONTROLLING ONE THREE PHASE MOTOR 230V 400V.
INDUSTRIAL PROGRAMMER CONTROLLING ONE SINGLE PHASE / THREE PHASE MOTOR
ELECTRONIC PROGRAMMER WITH EXTERNAL CONTROL BUTTONS
– 370W single phase power supply 230Vac,
– 700W three phase power supply 400Vac.Automatic, semiautomatic, manual and remote control functions.
Command inputs TA, TB, TC, TD, TAL.
Incorporated door security switch.
Optional external control buttons.
Electric brake output.
Interface for a standard slot-in radio receiver card.
Supplied with 4 x Ø16mm cable glands.
The control unit is supplied with 4 x Ø16mm cable glands.
The PRG383TCE control unit is Suitable for the control of industrial gates and doors with one three
phase motor.€276,00 + TAXPRG383TCE
€276,00 + TAX -
HL251CL
HL251CL – UNDERGROUND ELECTROMECHANICAL MOTOR 230V
HL251CL – SELF-LOCKING UNDERGROUND MOTOR WITH ENCODER 230V
SWING GATES MAX WEIGHT. 550KG
HL251CL – SELF-LOCKING MOTOR IN PHASE OUT
REPLACED BY NEW MODEL : HLXCORE230 MOTORELECTROMECHANICAL OPERATOR HL251CL
– 230V MOTOR FOR GATES
– 110° MAXIMUM OPENING ANGLE
– GATE MAX 3M
– GATE MAX 5050KG
Self-locking operator:
– fitted with a crank rod transmission system;
– supplied with a 6m connection cable;
– embedding case and Cardin electronic programmer to be ordered separately. -
HLBOXC
HLBOXC : HOT-GALVANIZED FOUNDATION GEAR MOTOR IN CATAPHORESIS + SBLSHL RELEASE WITH LEVER
HLBOXC Foundation box or HEMBEDDED CASE for underground electromechanical gearmotor 24 V 230 V ideal for swing gates up to 3 meters.
Equipped with encoder and easy release.
Safe thanks to the precision and sensitivity of the encoder and to the slowdowns in opening and closing.
Practical thanks to the control unit with quick connection and self-learning receiver.
Adjustable limit switches integrated in the case.
Reliable with perfect watertightness and solid and robust mechanics.HLBOXC EMBEDDED CASE
Complete with connection lever and adjustable mechanical travel limits.
Foundation box in hot-dip galvanized cataphoresis complete with connection
levers and mechanical stops adjustable in opening and closing.+ SBLSHL Release with lever for HLBOX or HLBOXI foundation boxes
All versions are fitted with a stainless steel cover.€211,00 + TAXHLBOXC
€211,00 + TAX -
PRG900CB
PRG900CB – GRAPHIC DISPLAY CONTROL UNIT FOR 1 OR 2 24V MOTORS + CHARGER + NiMH BATTERIES
PRG900CB – ELECTRONIC CONTROL UNIT PROGRAMMERS FOR THE MANAGEMENT OF ONE OR TWO MOTORS + charger and NiMH batteries
Electronic PRG900CB control unit programmer for the control of 24Vdc hinged gates with
intelligent time control functions that allow you to control the position of
the hinged and sliding gates, .The PRG900CB control uniti fitted with a multi-decoding module S449
– S486 – S504 – S508. Gate travel time programming is fully automatic
and guided by a 6-digit display which allows you to visualise the number
of manoeuvres carried out and to set several parameters such as the
type of motor, the torque setting and the limited opening distance.Dip-switches allow you to set the system parameters including: the
sequential button mode, automatic reclosing, warning lamp pre-flashing,
intermittent warning lamp activation, indicator light and photoelectric cell
function setting and electric lock enable.€283,00 + TAXPRG900CB
€283,00 + TAX -
TXQ504C2
TXQ504C2 – 2-FUNCTION PRECODED TRANSMITTER (433MHz)
TXQ504C2 – QUARTZ TRANSMITTER DIGITAL REMOTE RADIO CONTROL WITH ROLLING CODES
2-function pre-coded remote control radio transmitter (433MHz)
TXQ504C2 – PRECODED TRANSMITTER – REMOTE RADIO CONTROL OR RADIO CONTROL
The TXQ504C2 transmitter container in shockproof plastic material.
3V lithium battery power supply CR2032.
Overall dimensions 35 x 80 x 11.
Radio system
433MHz – 868MHz FM ROLLING CODE
2128 CODE COMBINATIONS
REMOTE TRANSMITTER MEMORISATION
RFID: WIRELESS MEMORY
AERIAL ANS400 – ANQ800-1€23,00€28,00+ TAXTXQ504C2
€23,00€28,00+ TAX -
RQM508C2
RQM508C2 – 868MHz STANDARD MIN 2-CHANNEL RECEIVER IN BOX (12 / 24Vac-dc).
RQM508C2 – 868MHz STANDARD INDOOR MINI 2-CHANNEL RECEIVER IN BOX (12 / 24Vac-dc).
The unit RQM508C2 is an electronic circuit with a 10-way terminal block; Fitted with 2 relay
channels which can be set to ON/OFF or impulsive.
Possibility of memorising up to 1000 codes.ABS indoor enclosure – IP20.
Overall dimensions(mm) 95 x 75 x 25.€60,00 + TAXRQM508C2
€60,00 + TAX -
RSQ508OC2
RSQ508OC2 – 868MHz 2-CHANNEL SLOT-IN RECEIVER OPEN COLLECTOR (12 / 24Vac-dc).
RSQ508OC2 – 868MHz 2-CHANNEL SLOT-IN RECEIVER OPEN COLLECTOR (12 / 24Vac-dc).
The unit RSQ508OC2 Receivers Open collector card for direct insertion into a host appliance
designed to receive it. Impulsive channels.
Possibility of memorising up to 1000 codes.Overall dimensions(mm) 95 x 75 x 25.
€40,00 + TAXRSQ508OC2
€40,00 + TAX -
GLMECHA24S MOTOR
GLMECHA24M / GLMECHA 24M – MASTER SELF-LOCKING SWINGING GARAGE DOOR MOTOR 24V
GLMECHA24M / GLMECHA 24M – EELECTROMECHANICAL ACTUATOR FOR OVERHEAD GARAGE DOORS 24V
Electromechanical gearmotor 24V ideal for overhead doors up to 8 m2.
Safe and Precise thanks to the encoder and the slowing down in opening and closing.
Practical thanks to the control unit with plug-in receiver and self-learning function.
LED courtesy light.
Versatile, with a wide choice of accessories for any installation need.GLMECHA24M / GLMECHA 24M – SELF-LOCKING GARAGE DOOR MOTOR
SELF-PROGRAMMING ELECTROMECHANICAL UNIT WITH A 24V MOTOR (433MHz)
Self-locking encoder-controlled Master automation with an in-built
electronic programmer.
Operator arms are to be ordered separately.
Kit battery charger + batteries to be ordered separately.
with a 230V slave motor for garage doors 2,5 m and 8 m2 .€295,00 + TAXGLMECHA24S MOTOR
€295,00 + TAX
