TXQ504C2

23,0028,00 + TAX (-18%)

In stock

TXQ504C2 - 2-FUNCTION PRECODED TRANSMITTER (433MHz)

TXQ504C2 - QUARTZ TRANSMITTER DIGITAL REMOTE RADIO CONTROL WITH ROLLING CODES
2-function pre-coded remote control radio transmitter (433MHz)

TXQ504C2 - PRECODED TRANSMITTER - REMOTE RADIO CONTROL OR RADIO CONTROL
The TXQ504C2 transmitter container in shockproof plastic material.
3V lithium battery power supply CR2032.
Overall dimensions 35 x 80 x 11.

If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount

Compare

TXQ504C2 – 2-FUNCTION PRECODED TRANSMITTER (433MHz)

TXQ504C2 – QUARTZ TRANSMITTER DIGITAL REMOTE RADIO CONTROL WITH ROLLING CODES
2-function pre-coded remote control radio transmitter (433MHz)

TXQ504C2 – PRECODED TRANSMITTER – REMOTE RADIO CONTROL OR RADIO CONTROL
The TXQ504C2 transmitter container in shockproof plastic material.
3V lithium battery power supply CR2032.
Overall dimensions 35 x 80 x 11.

If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount

Radio system
433MHz – 868MHz FM ROLLING CODE
2128 CODE COMBINATIONS
REMOTE TRANSMITTER MEMORISATION
RFID: WIRELESS MEMORY
AERIAL ANS400 – ANQ800-1

An extremely secure state-of-the-art radio control system with 128 bit cryptography.
The system has gathered together a series of specific appliances under a single working protocol
aimed at the remote control of automatic and security installations.

TXQ504C2 remote radio control transmitter is solutions for all possible uses: control of automatic installations for gates and doors,
the command and control of automatic rolling shutters and sun blinds, the activation of alarm and access control
systems as well as the activation of all ON-OFF or timer-controlled systems.
Adopting the S504 – S508 system doesn’t just offer high levels of efficiency but also provides practicality
for the user and an extremely useful and manageable appliance for the installer.

DOUBLE PROTECTIVE CASING SHOCKPROOF CONTAINER
KEY BLOCK PROTECTION AGAINST CASUAL ACTIVATION
REMOTE ENABLING USING  A TRANSMITTER ALREADY MEMORISED IN THE SYSTEM
FLUSH-FITTING METAL KEYRING
3V LITHIUM BATTERY (1 x CR2032)

NETWORK CONNECTIVITY

The S504 – S508 range interacts with an evolved system consisting of a server dedicated to the 3G/WF connection by means of appliances and software for computers and smart phones.

DIGITAL ROLLING CODE TRANSMITTERS 128 BIT WITH 2/4/8 CHANNELS

The TXQ508BD2 transceiver , powered by a 3-volt lithium batteries (1 x CR2032) with a range of from 100 to 150 metres, are pre-coded in the factory with a unique identification number printed on the rear so as to allow memorisation in lots on the receiver and can be enabled without the presence of the receivers from a remote location through the use of a second transmitter that has already been memorised in the system.
They are fitted with a key-lock function which when selected protects the appliance from any accidental activation and automatic shut down that cuts in after at least twenty seconds of continuous activation in order to reduce battery consumption.
The bidirectional transmitters (transceivers) receive a confirmation signal allowing you to control an operation from a remote location.

TXQ508BD2 QUARTZ RECEIVERS WITH THE POSSIBILITY OF MEMORISING UP TO 1000 USER CODES

The TXQ508BD2 transceiver are available in all the classic Cardin versions: outdoor receivers 12-24V with display, with LCD display and 3G/WF functions in watertight cases IP55, mini receiver units to be installed in appliances which already have a protective casing and slot-in receiver cards for direct insertion into host appliances designed to receive them.
A code and memory programming base via USB allows the transmitters to be memorised in blocks and access to the remote memorisation function thanks the to RFID technology fitted into the transmitters.
AVAILABLE TRANSMITTER CHANNELS 2-4-8
AVAILABLE TRANSCEIVER CHANNELS 2-4
RANGE 100 – 150 m
MORE THAN 4 BILLION PRE-CODED TRANSMITTER CODES
RADIO CONTROL SYSTEMS

ACCESSORIES TXQ504C2 TRANSMITTER RADIO CONTROL

COVERMIX5002   : 5 2-CHANNEL KEYPAD COVERS WITH 5 DIFFERENT COLOURS

COVERMIX5004   : 5 4-CHANNEL KEYPAD COVERS WITH 5 DIFFERENT COLOURS

XACSUPTX500     : TRANSMITTER WALL / CAR SUPPORT DARK GREY

XACSUPTX500GC : TRANSMITTER WALL / CAR SUPPORT LIGHT GREY

ZRA3.0-3.8-W      : 3V LITHIUM BATTERY PACK (SSB-504 / SSB-508)

PGBASE500         : CODE AND MEMORY PROGRAMMING BASE VIA USB
The USB code and memory programming base allows the
transmitters to be programmed in batches and remote code
memorisation and replacement thanks to the RFID technology
present in the series S504 transmitters and in the management
software CARDINTX_SW.

Additional information

Weight 1 kg
Dimensions 0,2 × 0,2 × 0,1 m
Be the first to review “TXQ504C2”

Your email address will not be published. Required fields are marked *

CAPTCHA ImageChange Image

Reviews

There are no reviews yet.

See It Styled On Instagram

    No access token

Main Menu