Equipment of the professional line
They are devices equipped with additional functions
- Sorry, this product cannot be purchased.
-
DKSTPM – KIT TRANSPONDER IN ZAMA + INTERFACE
DKSTPM – KIT TRANSPONDER IN ZAMA + INTERFACE
DKSTPM – TRANSPONDER IN ZAMA + INTERFACE KIT consists of two products:
DKSTPMT – TRANSPONDER IN ZAMA READER
DKS1000R – 4CH INTERFACEDKSTPMT – TRANSPONDER IN ZAMA READER
Surface-mounting IP57.
Using dip-switch settings it is possible to program the backlighting and other
operational parameters. It is suitable for connection with the DKS security system
via a shielded unipolar wire carrying both the power supply and the data line. Allows
the interface to be activated by proximity reading an S500 transmitter, a TAG or a
CARD. It is also fitted with auxiliary serial line allowing it to connect to the CARHF4G
system .DKS1000R – 4 CHANNEL INTERFACE
The interface box is easy to install and has the following features:
– power supply 12 or 24Vac-dc;
– 4 normally open relays (one for each channel);
– management of up to 3 peripheral devices (keypads and/or transponder readers;
– 1 multifunction key for the following functions: storing a code, cancelling a code,
cancelling the entire memory content, inserting an activation code for the “remote
memorisation” function. It is possible to store 1000 codes in memory with
a maximum of 6 digits for each code. Each code can activate up to 4 channels
(different functions).If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€89,00 + TAXDKSTPM – KIT TRANSPONDER IN ZAMA + INTERFACE
€89,00 + TAX -
DKSTPMT – TRANSPONDER IN ZAMAK CASE
DKSTPMT – TRANSPONDER READER IN ZAMAK CASE
DKSTPMT – TRANSPONDER READER IN ZAMAK CASE
TRANSPONDER READER Surface-mounting IP57.
Using dip-switch settings it is possible to program the backlighting and other
operational parameters. It is suitable for connection with the DKS security system
via a shielded unipolar wire carrying both the power supply and the data line. Allows
the interface to be activated by proximity reading an S500 transmitter, a TAG or a
CARD. It is also fitted with auxiliary serial line allowing it to connect to the CARHF4G
system.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€57,00 + TAXDKSTPMT – TRANSPONDER IN ZAMAK CASE
€57,00 + TAX -
GLMECHA24S MOTOR
GLMECHA24M / GLMECHA 24M – MASTER SELF-LOCKING SWINGING GARAGE DOOR MOTOR 24V
GLMECHA24M / GLMECHA 24M – EELECTROMECHANICAL ACTUATOR FOR OVERHEAD GARAGE DOORS 24V
Electromechanical gearmotor 24V ideal for overhead doors up to 8 m2.
Safe and Precise thanks to the encoder and the slowing down in opening and closing.
Practical thanks to the control unit with plug-in receiver and self-learning function.
LED courtesy light.
Versatile, with a wide choice of accessories for any installation need.GLMECHA24M / GLMECHA 24M – SELF-LOCKING GARAGE DOOR MOTOR
SELF-PROGRAMMING ELECTROMECHANICAL UNIT WITH A 24V MOTOR (433MHz)
Self-locking encoder-controlled Master automation with an in-built
electronic programmer.
Operator arms are to be ordered separately.
Kit battery charger + batteries to be ordered separately.
with a 230V slave motor for garage doors 2,5 m and 8 m2 .If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€295,00 + TAXGLMECHA24S MOTOR
€295,00 + TAX -
GLMECHA230S MOTOR
GLMECHA230S / GLMECHA 230S – SLAVE SELF-LOCKING SWINGING GARAGE DOOR MOTOR 230V
GLMECHA230S / GLMECHA 230S – EELECTROMECHANICAL ACTUATOR MOTOR FOR OVERHEAD GARAGE DOORS 230V
Electromechanical gearmotor 230V ideal for overhead doors up to 8 m2.
Safe and Precise thanks to the encoder and the slowing down in opening and closing.
Practical thanks to the control unit with plug-in receiver and self-learning function.
LED courtesy light.
Versatile, with a wide choice of accessories for any installation need.GLMECHA230S / GLMECHA 230S – SLAVE SELF-LOCKING GARAGE DOOR MOTOR
ELECTROMECHANICAL UNIT WITH A 230V MOTOR
Self-locking slave automation.
Use to supplement the GLMECHA230M units for particular
installations that require two motors.
Operator arm to be ordered separately.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€295,00 + TAXGLMECHA230S MOTOR
€295,00 + TAX -
GLMECHA24M MOTOR
GLMECHA24M / GLMECHA 24M – MASTER SELF-LOCKING SWINGING GARAGE DOOR MOTOR 24V
GLMECHA24M / GLMECHA 24M – EELECTROMECHANICAL ACTUATOR FOR OVERHEAD GARAGE DOORS 24V
Electromechanical gearmotor 24V ideal for overhead doors up to 8 m2.
Safe and Precise thanks to the encoder and the slowing down in opening and closing.
Practical thanks to the control unit with plug-in receiver and self-learning function.
LED courtesy light.
Versatile, with a wide choice of accessories for any installation need.GLMECHA24M / GLMECHA 24M – SELF-LOCKING GARAGE DOOR MOTOR
SELF-PROGRAMMING ELECTROMECHANICAL UNIT WITH A 24V MOTOR (433MHz)
Self-locking encoder-controlled Master automation with an in-built
electronic programmer.
Operator arms are to be ordered separately.
Kit battery charger + batteries to be ordered separately.
with a 230V slave motor for garage doors 2,5 m and 8 m2 .If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€459,00 + TAXGLMECHA24M MOTOR
€459,00 + TAX -
GLMECHA230M MOTOR
GLMECHA230M / GLMECHA 230M – MASTER SELF-LOCKING SWINGING GARAGE DOOR MOTOR 230V
GLMECHA230M / GLMECHA 230M – EELECTROMECHANICAL ACTUATOR FOR OVERHEAD GARAGE DOORS 230V
Electromechanical gearmotor 230 V ideal for overhead doors up to 8 m2.
Safe and Precise thanks to the encoder and the slowing down in opening and closing.
Practical thanks to the control unit with plug-in receiver and self-learning function.
LED courtesy light.
Versatile, with a wide choice of accessories for any installation need.GLMECHA230M / GLMECHA 230M – SELF-LOCKING GARAGE DOOR MOTOR
SELF-PROGRAMMING ELECTROMECHANICAL UNIT WITH A 230V MOTOR (433MHz)
Self-locking encoder-controlled Master automation with an in-built
electronic programmer.
Operator arms are to be ordered separately.
Kit battery charger + batteries to be ordered separately.
with a 230V slave motor for garage doors 2,5 m and 8 m2 .If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€449,00 + TAXGLMECHA230M MOTOR
€449,00 + TAX -
SLX24DRACO2 MOTOR
SLX24DRACO2 – ELECTROMECHANICAL UNIT WITH A 24V MOTOR
The SLX24DRACO2 motor for sliding gate automation is made up of a self-locking gear motor controlled
by magnetic encoder with an in-built:
– electronic programmer;
– 433MHz FM receiver;
The innovative SLX24DRACO2 system permits the gate’s movement to
be accompanied with total security and features a “variable speed
function” which can be adjusted according to the different installation
requirements up to a maximum speed of 30m per minute.The electronic programmer is factory fitted with a graphic LCD display
(128 x 128 pixels) with backlighting in six different languages.
The menu allows you to rapidly set the system parameters including:
the sequential button mode, automatic reclosing, warning lamp
pre-flashing, intermittent warning lamp activation, indicator light and
photoelectric cell function setting etc.
The electronics card, thanks to the presence of the real-time clock,
allows you to set 10 events (shown on the display) and these events
permit you to regulate the opening and closing of the motor at
different times during the day. The appliance is fitted with a safe and
secure lever operated manual release system protected by a robust
access door with a personalised key.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€895,00 + TAXSLX24DRACO2 MOTOR
€895,00 + TAX -
KT-BLGRIFFE24T MOTOR KIT
KT-BLGRIFFE24T – KIT BLGRIFFE24TM – ELECTROMECHANICAL GROUP WITH 24V MOTOR
BLGRIFFE24TM MASTER – SELF-LOCKING GROUP MOTOR WITH MECHANICAL LIMIT SWITCH 24V MAX. 200KG + NIMH BATTERIES(optional)
BLGRIFFE24TM MASTER Encoder-controlled self-locking Master unit for swing gate with hinged arms including:
– electronic programmer;
– 433MHz FM receiver;
– Operator hinged arm included.
Kit battery charger + batteries to be ordered separately.KIT CONTENTS : KT-BLGRIFFE24T
BLGRIFFE24M – MASTER SELF-LOCKING GROUP
with 24V motor controlled by encoder, programmer electronic,
433MHz FM receiver, battery charger and NiMH batteries.BLGRIFFE24S – SLAVE SELF-LOCKING GROUP
to automate the second door.ICON – LED FLASHING LIGHT 24V – 230V
with built-in antenna.RSQ504OC2 – 2 CHANNEL RECEIVER OPEN COLLECTOR
DUAL-CHANNEL CARD RECEIVER plug-in open collector 433MHz.
Versions for the S508 – S486 – S449 and EDGE series are available on request.TXQ504C4 – 2 4-FUNCTION TRANSMITTERS
433MHz FM ROLLING CODE.CDR999 – PAIR OF SURFACE PHOTOCELLS
in class 3 with adjustable optics, 10m range.CABPC10 – 10m CONNECTION CABLE
with pre-insulated end tubes.PLATE-INT – INTERNATIONAL WARNING PLATE
in multilingual PP.€685,00 + TAXKT-BLGRIFFE24T MOTOR KIT
€685,00 + TAX -
KT-BLGRIFFE24 MOTOR KIT
KT-BLGRIFFE24 – KIT BLGRIFFE24M – ELECTROMECHANICAL GROUP WITH 24V MOTOR
BLGRIFFE24M MASTER – SELF-LOCKING GROUP MOTOR WITH ENCODER 24V MAX. 200KG + NIMH BATTERIES(optional)
BLGRIFFE24M MASTER Encoder-controlled self-locking Master unit for swing gate with hinged arms including:
– electronic programmer;
– 433MHz FM receiver;
– Operator hinged arm included.
Kit battery charger + batteries to be ordered separately.KIT CONTENTS : KT-BLGRIFFE24
BLGRIFFE24M – MASTER SELF-LOCKING GROUP
with 24V motor controlled by encoder, programmer electronic,
433MHz FM receiver, battery charger and NiMH batteries.BLGRIFFE24S – SLAVE SELF-LOCKING GROUP
to automate the second door.ICON – LED FLASHING LIGHT 24V – 230V
with built-in antenna.TXQ504C4 – 2 4-FUNCTION TRANSMITTERS
433MHz FM ROLLING CODE.CDR999 – PAIR OF SURFACE PHOTOCELLS
in class 3 with adjustable optics, 10m range.CABPC10 – 10m CONNECTION CABLE
with pre-insulated end tubes.PLATE-INT – INTERNATIONAL WARNING PLATE
in multilingual PP.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€745,00 + TAXKT-BLGRIFFE24 MOTOR KIT
€745,00 + TAX -
BLGRIFFE24S MOTOR
BLGRIFFE24S SLAVE – ELECTROMECHANICAL GROUP WITH 24V MOTOR
BLGRIFFE24S SLAVE– SELF-LOCKING GROUP MOTOR WITH ENCODER 24V MAX. 200KG + NIMH BATTERIES(optional)
BLGRIFFE24S SLAVE Encoder-controlled self-locking Motor unit for swing gate with hinged arms including:– Operator hinged arm included.
– Kit battery charger + batteries to be ordered separately.USING IN
Particularly suited for installations with narrow columns that require
the mounting base to be less than 180mm in width and also for swing
gates where the hinges are not aligned to the edge of the column
and with gate leaves of up to 2 metres in length (2,5m with an
electric lock), 200kg maximum weight.
Manual release is carried out using a practical locking – unlocking
lever protected by a security key.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€265,00 + TAXBLGRIFFE24S MOTOR
€265,00 + TAX -
BLGRIFFE24TM MOTOR
BLGRIFFE24TM MASTER- ELECTROMECHANICAL GROUP WITH 24V MOTOR
BLGRIFFE24TM MASTER – SELF-LOCKING GROUP MOTOR WITH MECHANICAL TRAVEL LIMIT (ENCODER optional) 24V MAX. 200KG + NIMH BATTERIES(optional)
BLGRIFFE24TM MASTER mechanical travel limits (Encoder-controlled optional) self-locking Master unit for swing gate with hinged arms including:
– electronic programmer;
– Operator hinged arm included.– Kit battery charger + batteries to be ordered separately.
– 433MHz FM open collector receiver to be ordered separately;
USING IN
Particularly suited for installations with narrow columns that require
the mounting base to be less than 180mm in width and also for swing
gates where the hinges are not aligned to the edge of the column
and with gate leaves of up to 2 metres in length (2,5m with an
electric lock), 200kg maximum weight.
Manual release is carried out using a practical locking – unlocking
lever protected by a security key.€368,00 + TAXBLGRIFFE24TM MOTOR
€368,00 + TAX -
BLGRIFFE24M MOTOR
BLGRIFFE24M MASTER- ELECTROMECHANICAL GROUP WITH 24V MOTOR
BLGRIFFE24M MASTER – SELF-LOCKING GROUP MOTOR WITH ENCODER 24V MAX. 200KG + NIMH BATTERIES(optional)
BLGRIFFE24M MASTER Encoder-controlled self-locking Master unit for swing gate with hinged arms including:
– electronic programmer;
– 433MHz FM receiver;
– Operator hinged arm included.
Kit battery charger + batteries to be ordered separately.USING IN
Particularly suited for installations with narrow columns that require
the mounting base to be less than 180mm in width and also for swing
gates where the hinges are not aligned to the edge of the column
and with gate leaves of up to 2 metres in length (2,5m with an
electric lock), 200kg maximum weight.
Manual release is carried out using a practical locking – unlocking
lever protected by a security key.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€396,00 + TAXBLGRIFFE24M MOTOR
€396,00 + TAX