photocells accessories
-
POS100AA
POS100AA – COLUMN IN ANODIZED ALUMINUM
POS100AA – Anodized aluminum column 110 cm high,
for two module of the APRO / VEDO and PASSO devices.
Pack of 1 pcs.CP POS Fixing kit for POS100A and POS100A, POS100AA columns.
Conf. da 1 pcs.
POS100AA It is replaced by the new CARDIN column: SEL120D
-
VEDO180PRO
VEDO180PRO PHOTOCELL
VEDO180PRO PHOTOCELL
Photocell VEDO180 PRO programmable infrared photocell. Ideal for complex installations, up to 8 couples of photocells thanks to
new synchronised system. Infrared beam could be regulated horizontally over 180°.
The particular selfcentering lent corrects mistakes also vertically. Supply can be at 24V alternating voltage
or continue, without polarity refer.
Range 25m.€43,00 + TAXVEDO180PRO
€43,00 + TAX -
ILBSINCRO
ILBSINCRO PHOTOCELL
ILBSINCRO PHOTOCELL
Programmable infrared photocell.
ILB SINCRO photocell is Ideal for complex systems with up to 8 pairs of photocells thanks to the new synchronism system.
The power supply can be 24V alternating or direct, without polarity references.PHOTOCELL ILB SINCRO
Pair of synchronized flush mounted photocells with adjustable optics.
Range 50 m.€42,00 + TAXILBSINCRO
€42,00 + TAX -
CDR841E00 – PHOTOCELL
CDR841E00 – PHOTOCELL WITH SURFACE MOUNT CASE
IP55 RANGE 15MCDR841E00 PHOTOCELL – PHOTOELECTRIC OR PHOTOCELLS IN A SHOCKPROOF CASE IP55
Maximum range 15m – 60m
Power supply 12/24Vac-dc
Protection grade IP55
Transmitter and receiver housed in a waterproof plastic case.
Double-relay with serial exchange.
Sensitivity adjustment trimmer located on the receiver (only
CDR851).CDR841E00 PHOTOCELL – SURFACE-MOUNT PHOTOELECTRIC CELLS, RANGE MAX. 15m
The kit contains a pair of surface-mount photoelectric cells, 2 lens
covers for surface-mount photocells and 2 fast-fitting wall bracketsIf you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€43,00 + TAXCDR841E00 – PHOTOCELL
€43,00 + TAX -
POS50A
POS50A – COLUMN IN ANODIZED ALUMINUM
POS50A – Anodized aluminum column 55 cm high,
for one module of the APRO / VEDO and PASSO devices.
Pack of 2 pcs.CP POS Fixing kit for POS50A and POS100A, POS100AA columns.
POS50A It is replaced by the new CARDIN column: SEL50
-
CDR841I00 – PHOTOCELLS
CDR841I00 – PHOTOCELL WITH SHOCKPROOF CASE
IP55 RANGE 15MCDR841I00 PHOTOCELL – PHOTOELECTRIC OR PHOTOCELLS
IN A SHOCKPROOF CASE IP55 15M RANGE
Maximum range 15m – 60m
Power supply 12/24Vac-dc
Protection grade IP55
Transmitter and receiver housed in a waterproof plastic case.
Double-relay with serial exchange.
Sensitivity adjustment trimmer located on the receiver (only
CDR851).CDR841I00 PHOTOCELL – FLUSH-FITTING PHOTOELECTRIC CELLS, RANGE 15m
The kit contains a pair of flush-fitting photoelectric cells and 2 lens
covers for flush-fitting photocells.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€46,00 + TAXCDR841I00 – PHOTOCELLS
€46,00 + TAX -
FTR893C3 – MINI PHOTOCELL
FTR893C3 / FTR 893C3 – MINI PHOTOCELL
WITH SURFACE MOUNT CASE IP55
FTR 893C3 / FTR893C3 PHOTOCELL – PHOTOELECTRIC OR PHOTOCELLS IN A SHOCKPROOF CASE IP55
FTR893C3 / FTR 893C3 DOUBLE-RELAY PHOTOELECTRIC PHOTOCELLS
Power supply 12/24Vac-dc.
Range: 2,5m indoors.
Transmitter cable 4 metres – Receiver cable 4 metres.SINGLE-BEAM INFRARED BARRIER PHOTOELECTRIC PHOTOCELLS
Overall dimensions 90 x 50 x 20.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€46,00 + TAXFTR893C3 – MINI PHOTOCELL
€46,00 + TAX -
CDR999 PHOTOCELL
CDR999 – PHOTOCELL WITH SURFACE MOUNT CASE
IP55 RANGE 10MCDR999 PHOTOCELL – PHOTOELECTRIC OR PHOTOCELLS IN A SHOCKPROOF CASE IP55
Maximum range 10m
Power supply 12/24Vac-dc
Protection grade IP55
Transmitter and receiver housed in waterproof cases.
Self locking adjustable lens which can be rotated horizontally
through plus or minus 90° and vertically through plus or minus 30°
with respect to the standard installation position.
It is possible to connect up to 3 pairs of photocells and synchronize
the transmission (multiplex system).
Double relays on the receiver with digital control increase the security
and safety level of the output part (the part that furnishes the at rest/
alarm signal). Jumper for selecting the output contact mode (potential
free or resistance 8, 2kΩ contacts).CDR999 PHOTOCELL – SURFACE-MOUNT PHOTOELECTRIC CELLS, RANGE MAX. 10m
If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€51,00 + TAXCDR999 PHOTOCELL
€51,00 + TAX -
CDR851 – PHOTOCELL
CDR851 – PHOTOCELL WITH SURFACE MOUNT CASE
IP55 RANGE 60MCDR851 PHOTOCELL – PHOTOELECTRIC OR PHOTOCELLS IN A SHOCKPROOF CASE IP55
Maximum range 15m – 60m
Power supply 12/24Vac-dc
Protection grade IP55
Transmitter and receiver housed in a waterproof plastic case.
Double-relay with serial exchange.
Sensitivity adjustment trimmer located on the receiver (only
CDR851).CDR851 PHOTOCELL – SURFACE-MOUNT PHOTOELECTRIC CELLS, RANGE MAX. 60m
The kit contains a pair of surface-mount photoelectric cells, 2 lens
covers for surface-mount photocells and 2 fast-fitting wall bracketsIf you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€55,00 + TAXCDR851 – PHOTOCELL
€55,00 + TAX -
CDR851T – PHOTOCELL
CDR851T – PHOTOCELL WITH SURFACE MOUNT CASE
IP55 RANGE 60MCDR851T PHOTOCELL – PHOTOELECTRIC OR PHOTOCELLS IN A SHOCKPROOF CASE IP55
Maximum range 15m – 60m
Power supply 12/24Vac-dc
Protection grade IP55
Transmitter and receiver housed in a waterproof plastic case.
Double-relay with serial exchange.
Sensitivity adjustment trimmer located on the receiver (only
CDR851).CDR851T PHOTOCELL – SURFACE-MOUNT PHOTOELECTRIC CELLS, RANGE MAX. 60m
Anti-tamper version.
The kit contains a pair of surface-mount photoelectric cells, 2 lens
covers for surface-mount photocells and 2 fast-fitting wall bracketsIf you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount -
CDR973EX – PHOTPCELLS
CDR973EX – SURFACE MOUNTED PHOTOCELL WITH IP55 SHOCKPROOF CASE 15M RANGE
CDR973EX PHOTOCELL – PHOTOELECTRIC CELLS IN A SHOCKPROOF CASE IP55
Maximum range 15m
Power supply 12/24Vac-dc
Protection grade IP55
Transmitter and receiver housed in a waterproof plastic case.
Self locking adjustable lens which can be rotated horizontally
through plus or minus 90° and vertically through plus or minus 30°
with respect to the standard installation position.
It is possible to connect up to 3 pairs of photocells and synchronize
the transmission (multiplex system).CDR973EX PHOTOCELL – SURFACE-MOUNT PHOTOELECTRIC CELLS
The kit contains a pair of surface-mount photoelectric cells, 2 lens
covers for surface-mount photocells and 2 fast-fitting wall brackets.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€64,00 + TAXCDR973EX – PHOTPCELLS
€64,00 + TAX
