Automation accessories: columns, photocells, flashing selectors, safety accessories
-
CDR861 PHOTOCELL
CDR861 – PHOTOCELL WITH SURFACE MOUNT CASE
IP55 RANGE 10MCDR861 PHOTOCELL – PHOTOELECTRIC OR PHOTOCELLS IN A SHOCKPROOF CASE IP55
CDR 861 – PAIR OF SURFACE-MOUNT PHOTOELECTRIC CELLS RANGE 10m
CDR861SUP – HOLE COVERING BASE Ø60mmINFRARED BARRIERS WITH FIXED POSITION LENSES
POWER SUPPLY 12/24Vac-dc
MAXIMUM RANGE 10 Metres
PROTECTION GRADE IP54
OPERATING TEMPERATURE RANGE -10…+55 °C
The infrared barrier constitutes an efficient safety system for the protection of
passageways or spaces which are equipped with automatic door or gate systems,
and for the detection and control of general passageways, whether carriageway or
pedestrian, situated inside or outside buildings.€38,00 + TAXCDR861 PHOTOCELL
€38,00 + TAX -
POS100AA
POS100AA – COLUMN IN ANODIZED ALUMINUM
POS100AA – Anodized aluminum column 110 cm high,
for two module of the APRO / VEDO and PASSO devices.
Pack of 1 pcs.CP POS Fixing kit for POS100A and POS100A, POS100AA columns.
Conf. da 1 pcs.
POS100AA It is replaced by the new CARDIN column: SEL120D
-
CP30BL – PASSIVE IMPACT EDGE
CP30BL – PASSIVE IMPACT EDGE
BP20BL – 2-METER PASSIVE IMPACT EDGE (PROFILE 70mm) – SAFETY DEVICES
CP30BL – 3-METER PASSIVE IMPACT EDGE (PROFILE 30mm) – SAFETY DEVICES
CP40BL – 4-METER PASSIVE IMPACT EDGE (PROFILE 30mm) – SAFETY DEVICES
CP50BL – 5-METER PASSIVE IMPACT EDGE (PROFILE 30mm) – SAFETY DEVICES
PASSIVE IMPACT EDGE – PASSIVE AUXILIARY DEVICES FOR SWING AND SLIDING GATES
High profile 70mm / low 30mm – colour black.
Low profile / high profile passive edge
Although it is not to be considered a safeties devices due to the absence of an electrical contact.
he passive edge has the same dimensions and mechanical protective characteristics as
the active safety edge and does supply valid absorption protection against impact. The
low profile edge, which works as simple impact protection, is suitable for closing
devices where passing room is limited.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€39,00 – €75,00 + TAXCP30BL – PASSIVE IMPACT EDGE
€39,00 – €75,00 + TAX -
VEDO180PRO
VEDO180PRO PHOTOCELL
VEDO180PRO PHOTOCELL
Photocell VEDO180 PRO programmable infrared photocell. Ideal for complex installations, up to 8 couples of photocells thanks to
new synchronised system. Infrared beam could be regulated horizontally over 180°.
The particular selfcentering lent corrects mistakes also vertically. Supply can be at 24V alternating voltage
or continue, without polarity refer.
Range 25m.€43,00 + TAXVEDO180PRO
€43,00 + TAX -
ILBSINCRO
ILBSINCRO PHOTOCELL
ILBSINCRO PHOTOCELL
Programmable infrared photocell.
ILB SINCRO photocell is Ideal for complex systems with up to 8 pairs of photocells thanks to the new synchronism system.
The power supply can be 24V alternating or direct, without polarity references.PHOTOCELL ILB SINCRO
Pair of synchronized flush mounted photocells with adjustable optics.
Range 50 m.€42,00 + TAXILBSINCRO
€42,00 + TAX -
CDR841E00 – PHOTOCELL
CDR841E00 – PHOTOCELL WITH SURFACE MOUNT CASE
IP55 RANGE 15MCDR841E00 PHOTOCELL – PHOTOELECTRIC OR PHOTOCELLS IN A SHOCKPROOF CASE IP55
Maximum range 15m – 60m
Power supply 12/24Vac-dc
Protection grade IP55
Transmitter and receiver housed in a waterproof plastic case.
Double-relay with serial exchange.
Sensitivity adjustment trimmer located on the receiver (only
CDR851).CDR841E00 PHOTOCELL – SURFACE-MOUNT PHOTOELECTRIC CELLS, RANGE MAX. 15m
The kit contains a pair of surface-mount photoelectric cells, 2 lens
covers for surface-mount photocells and 2 fast-fitting wall brackets€43,00 + TAXCDR841E00 – PHOTOCELL
€43,00 + TAX -
POS50A
POS50A – COLUMN IN ANODIZED ALUMINUM
POS50A – Anodized aluminum column 55 cm high,
for one module of the APRO / VEDO and PASSO devices.
Pack of 2 pcs.CP POS Fixing kit for POS50A and POS100A, POS100AA columns.
POS50A It is replaced by the new CARDIN column: SEL50
-
CDR841I00 – PHOTOCELLS
CDR841I00 – PHOTOCELL WITH SHOCKPROOF CASE
IP55 RANGE 15MCDR841I00 PHOTOCELL – PHOTOELECTRIC OR PHOTOCELLS
IN A SHOCKPROOF CASE IP55 15M RANGE
Maximum range 15m – 60m
Power supply 12/24Vac-dc
Protection grade IP55
Transmitter and receiver housed in a waterproof plastic case.
Double-relay with serial exchange.
Sensitivity adjustment trimmer located on the receiver (only
CDR851).CDR841I00 PHOTOCELL – FLUSH-FITTING PHOTOELECTRIC CELLS, RANGE 15m
The kit contains a pair of flush-fitting photoelectric cells and 2 lens
covers for flush-fitting photocells.€46,00 + TAXCDR841I00 – PHOTOCELLS
€46,00 + TAX -
FTR893C3 – MINI PHOTOCELL
FTR893C3 / FTR 893C3 – MINI PHOTOCELL
WITH SURFACE MOUNT CASE IP55
FTR 893C3 / FTR893C3 PHOTOCELL – PHOTOELECTRIC OR PHOTOCELLS IN A SHOCKPROOF CASE IP55
FTR893C3 / FTR 893C3 DOUBLE-RELAY PHOTOELECTRIC PHOTOCELLS
Power supply 12/24Vac-dc.
Range: 2,5m indoors.
Transmitter cable 4 metres – Receiver cable 4 metres.SINGLE-BEAM INFRARED BARRIER PHOTOELECTRIC PHOTOCELLS
Overall dimensions 90 x 50 x 20.€46,00 + TAXFTR893C3 – MINI PHOTOCELL
€46,00 + TAX -
CDR999 PHOTOCELL
CDR999 – PHOTOCELL WITH SURFACE MOUNT CASE
IP55 RANGE 10MCDR999 PHOTOCELL – PHOTOELECTRIC OR PHOTOCELLS IN A SHOCKPROOF CASE IP55
Maximum range 10m
Power supply 12/24Vac-dc
Protection grade IP55
Transmitter and receiver housed in waterproof cases.
Self locking adjustable lens which can be rotated horizontally
through plus or minus 90° and vertically through plus or minus 30°
with respect to the standard installation position.
It is possible to connect up to 3 pairs of photocells and synchronize
the transmission (multiplex system).
Double relays on the receiver with digital control increase the security
and safety level of the output part (the part that furnishes the at rest/
alarm signal). Jumper for selecting the output contact mode (potential
free or resistance 8, 2kΩ contacts).CDR999 PHOTOCELL – SURFACE-MOUNT PHOTOELECTRIC CELLS, RANGE MAX. 10m
€51,00 + TAXCDR999 PHOTOCELL
€51,00 + TAX -
SAFEPRC4 – SAFETY EDGE TRANSCEIVER INTERFACE
SAFEPRC4 – SAFETY EDGE TRANSCEIVER INTERFACE 433MHz
SAFEPRC4 – SAFETY EDGE TRANSCEIVER INTERFACE FOR SENSITIVE EDGE 433MHz
3V lithium battery power supply.
Safety edge signal input NC/8.2kΩ.
Maximum radio signal range 30m.
Shockproof case IP65.
ROLLING CODE FM RADIO system. transmission frequency: 433MHzIf you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€53,00 + TAXSAFEPRC4 – SAFETY EDGE TRANSCEIVER INTERFACE
€53,00 + TAX
