Automation accessories: columns, photocells, flashing selectors, safety accessories
-
ILBINO SINCRO
ILBINO SINCRO
ILBINO SINCRO photocell
Programmable infrared photocell.
ILBINO SINCRO is ideal for complex systems with up to 8 pairs of photocells thanks to the new synchronism system.
The power supply can be 24V alternating or direct, without polarity references.
ILBINO SINCRO
Pair of synchronized mini photocells.
Range 25 m.€36,00 + TAXILBINO SINCRO
€36,00 + TAX -
VEDO180
VEDO180 PHOTOCELL
VEDO 180 PHOTOCELL
Small size VEDO180 photocell for quick and easy installation.
The main feature is to have the internal electronics that can be oriented horizontally by 180 °.
This feature allows greater flexibility in fixing, while a particular self-centering lens eliminates any positioning errors.
The VEDO180 are equipped with automatic synchronism to eliminate interference between 2 pairs.VEDO 180 PHOTOCELL
Pair of synchronized external photocells with adjustable optics.
The infrared beam is adjustable 180° horizontally. Range 25 m.€37,00 + TAXVEDO180
€37,00 + TAX -
ICON – WARNING FLASHING LIGHT
ICON – 24-230V LED FLASHING LIGHT WITH ANTENNA
ICON – LED FLASHING LIGHT 24V – 230V WARNING LIGHT WITH ANTENNA
Multi-led warning flashing light with 433MHz antenna integrated in the circuit.
The light system is placed inside a shockproof container made of opalescent polycarbonate
that accentuates the realization of the luminous effect.
Selectable power supply on terminal board: 24Vac-dc – 230Vac.
Duty cycle 70%.
Steady light/flashing light selection jumper.
IP54 degree of protection.
Comes with relative column/wall support.€35,00 + TAXICON – WARNING FLASHING LIGHT
€35,00 + TAX -
FT201SINCRO
FT201SINCRO PHOTOCELL
FT201SINCRO / FT201 SINCRO PHOTOCELL
Pair of outdoor photocells, with synchronism and adjustable optics.
Small size FT201 SINCRO photocell for quick and easy installation.
The FT201 SINCRO are equipped with automatic synchronism to eliminate interference between 2 pairs.
High quality telcoma cardin photocell suitable for any automation for gates or in industrial environments€37,00 + TAXFT201SINCRO
€37,00 + TAX -
DKS1000R – INTERFACE 4CH
DKS1000R – INTERFACE 4CH
DKS1000R 4-CHANNEL INTERFACE
The interface 4CH DKS1000R box is easy to install and has the following features:
– power supply 12 or 24Vac-dc;
– 4 normally open relays (one for each channel);
– management of up to 3 peripheral devices (keypads and/or transponder readers;
– 1 multifunction key for the following functions: storing a code, cancelling a code,
cancelling the entire memory content, inserting an activation code for the “remote
memorisation” function. It is possible to store 1000 codes in memory with
a maximum of 6 digits for each code. Each code can activate up to 4 channels
(different functions).€37,00 + TAXDKS1000R – INTERFACE 4CH
€37,00 + TAX -
POS100A
POS100A – COLUMN IN ANODIZED ALUMINUM
POS100A – Anodized aluminum column 110 cm high,
for one module of the APRO / VEDO and PASSO devices.
Pack of 1 pcs.CP POS Fixing kit for POS100A and POS100A, POS100AA columns.
Conf. da 1 pcs.
POS100A It is replaced by the new CARDIN column: SEL120
-
CDR861 PHOTOCELL
CDR861 – PHOTOCELL WITH SURFACE MOUNT CASE
IP55 RANGE 10MCDR861 PHOTOCELL – PHOTOELECTRIC OR PHOTOCELLS IN A SHOCKPROOF CASE IP55
CDR 861 – PAIR OF SURFACE-MOUNT PHOTOELECTRIC CELLS RANGE 10m
CDR861SUP – HOLE COVERING BASE Ø60mmINFRARED BARRIERS WITH FIXED POSITION LENSES
POWER SUPPLY 12/24Vac-dc
MAXIMUM RANGE 10 Metres
PROTECTION GRADE IP54
OPERATING TEMPERATURE RANGE -10…+55 °C
The infrared barrier constitutes an efficient safety system for the protection of
passageways or spaces which are equipped with automatic door or gate systems,
and for the detection and control of general passageways, whether carriageway or
pedestrian, situated inside or outside buildings.€38,00 + TAXCDR861 PHOTOCELL
€38,00 + TAX -
POS100AA
POS100AA – COLUMN IN ANODIZED ALUMINUM
POS100AA – Anodized aluminum column 110 cm high,
for two module of the APRO / VEDO and PASSO devices.
Pack of 1 pcs.CP POS Fixing kit for POS100A and POS100A, POS100AA columns.
Conf. da 1 pcs.
POS100AA It is replaced by the new CARDIN column: SEL120D
-
CP30BL – PASSIVE IMPACT EDGE
CP30BL – PASSIVE IMPACT EDGE
BP20BL – 2-METER PASSIVE IMPACT EDGE (PROFILE 70mm) – SAFETY DEVICES
CP30BL – 3-METER PASSIVE IMPACT EDGE (PROFILE 30mm) – SAFETY DEVICES
CP40BL – 4-METER PASSIVE IMPACT EDGE (PROFILE 30mm) – SAFETY DEVICES
CP50BL – 5-METER PASSIVE IMPACT EDGE (PROFILE 30mm) – SAFETY DEVICES
PASSIVE IMPACT EDGE – PASSIVE AUXILIARY DEVICES FOR SWING AND SLIDING GATES
High profile 70mm / low 30mm – colour black.
Low profile / high profile passive edge
Although it is not to be considered a safeties devices due to the absence of an electrical contact.
he passive edge has the same dimensions and mechanical protective characteristics as
the active safety edge and does supply valid absorption protection against impact. The
low profile edge, which works as simple impact protection, is suitable for closing
devices where passing room is limited.€39,00 – €63,00 + TAXCP30BL – PASSIVE IMPACT EDGE
€39,00 – €63,00 + TAX -
VEDO180PRO
VEDO180PRO PHOTOCELL
VEDO180PRO PHOTOCELL
Photocell VEDO180 PRO programmable infrared photocell. Ideal for complex installations, up to 8 couples of photocells thanks to
new synchronised system. Infrared beam could be regulated horizontally over 180°.
The particular selfcentering lent corrects mistakes also vertically. Supply can be at 24V alternating voltage
or continue, without polarity refer.
Range 25m.€43,00 + TAXVEDO180PRO
€43,00 + TAX
