• BP20BL - CP30BL- CP40BL- CP50BL- MECHANICAL PASSIVE EDGE Mechanical auxilary safety device for swing and sliding gates

    CP30BL – PASSIVE IMPACT EDGE

    CP30BL – PASSIVE IMPACT EDGE

    BP20BL – 2-METER PASSIVE IMPACT EDGE (PROFILE 70mm) – SAFETY DEVICES
    CP30BL – 3-METER PASSIVE IMPACT EDGE (PROFILE 30mm) – SAFETY DEVICES
    CP40BL – 4-METER PASSIVE IMPACT EDGE (PROFILE 30mm) – SAFETY DEVICES
    CP50BL – 5-METER PASSIVE IMPACT EDGE (PROFILE 30mm) – SAFETY DEVICES

    PASSIVE IMPACT EDGE  – PASSIVE AUXILIARY DEVICES FOR SWING AND SLIDING GATES
    High profile 70mm / low 30mm – colour black.

    Low profile / high profile passive edge

    Although it is not to be considered a safeties devices due to the absence of an electrical contact.
    he passive edge has the same dimensions and mechanical protective characteristics as
    the active safety edge and does supply valid absorption protection against impact. The
    low profile edge, which works as simple impact protection, is suitable for closing
    devices where passing room is limited.

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

    39,0075,00 + TAX

    CP30BL – PASSIVE IMPACT EDGE

    39,0075,00 + TAX
  • RSQ508OC2

    RSQ508OC2 – 868MHz 2-CHANNEL SLOT-IN RECEIVER OPEN COLLECTOR (12 / 24Vac-dc).

    RSQ508OC2 – 868MHz 2-CHANNEL SLOT-IN RECEIVER OPEN COLLECTOR  (12 / 24Vac-dc).
    The unit RSQ508OC2 Receivers Open collector card for direct insertion into a host appliance
    designed to receive it. Impulsive channels.
    Possibility of memorising up to 1000 codes.

    Overall dimensions(mm) 95 x 75 x 25.

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

    RSQ508OC2

    40,00 + TAX
  • T1 CONTROL UNIT

    T1 – ELECTRONIC CONTROL UNIT

    T1 / T 1- ELECTRONIC CONTROL UNIT
    Control unit for 1 roller shutter motor in 230 V.
    Ideal for the manual control of one rolling grill or rolling shutter motor.
    Protection grade IP55.
    Plug in receiver (optional).
    T 1 Control unit for motor in handead man function.

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

    T1 CONTROL UNIT

    40,00 + TAX
  • SEL120D

    COLUMN SEL120D

    Column in anodized aluminum 120 cm high,
    for two modules for photocell devices and outdoor or recessed selectors.

    Pack of 1 pc.

    SELFIX
    Fixing kit for SEL50 SEL120 SEL120D columns.

    SEL120D

    43,00 + TAX
  • VEDO180PRO

    VEDO180PRO PHOTOCELL

    VEDO180PRO PHOTOCELL
    Photocell VEDO180 PRO programmable infrared photocell. Ideal for complex installations, up to 8 couples of photocells thanks to
    new synchronised system. Infrared beam could be regulated horizontally over 180°.
    The particular selfcentering lent corrects mistakes also vertically. Supply can be at 24V alternating voltage
    or continue, without polarity refer.
    Range 25m.

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

    VEDO180PRO

    43,00 + TAX
  • CDR841E00 – PHOTOCELL

    CDR841E00 – PHOTOCELL WITH  SURFACE MOUNT CASE
    IP55 RANGE 15M

    CDR841E00 PHOTOCELL – PHOTOELECTRIC OR PHOTOCELLS IN A SHOCKPROOF CASE IP55
    Maximum range 15m – 60m
    Power supply 12/24Vac-dc
    Protection grade IP55
    Transmitter and receiver housed in a waterproof plastic case.
    Double-relay with serial exchange.
    Sensitivity adjustment trimmer located on the receiver (only
    CDR851).

    CDR841E00 PHOTOCELL – SURFACE-MOUNT PHOTOELECTRIC CELLS, RANGE MAX. 15m
    The kit contains a pair of surface-mount photoelectric cells, 2 lens
    covers for surface-mount photocells and 2 fast-fitting wall brackets

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

    CDR841E00 – PHOTOCELL

    43,00 + TAX
  • CDR841I00 – PHOTOCELLS

    CDR841I00 – PHOTOCELL WITH  SHOCKPROOF CASE
    IP55 RANGE 15M

    CDR841I00 PHOTOCELL – PHOTOELECTRIC OR PHOTOCELLS
    IN A SHOCKPROOF CASE IP55 15M RANGE

    Maximum range 15m – 60m
    Power supply 12/24Vac-dc
    Protection grade IP55
    Transmitter and receiver housed in a waterproof plastic case.
    Double-relay with serial exchange.
    Sensitivity adjustment trimmer located on the receiver (only
    CDR851).

    CDR841I00 PHOTOCELL – FLUSH-FITTING PHOTOELECTRIC CELLS, RANGE 15m
    The kit contains a pair of flush-fitting photoelectric cells and 2 lens
    covers for flush-fitting photocells.

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

    CDR841I00 – PHOTOCELLS

    46,00 + TAX
  • FTR893C3 – MINI PHOTOCELL

    FTR893C3 / FTR 893C3 – MINI PHOTOCELL
    WITH 
    SURFACE MOUNT CASE IP55

    FTR 893C3 / FTR893C3 PHOTOCELL – PHOTOELECTRIC OR PHOTOCELLS IN A SHOCKPROOF CASE IP55

    FTR893C3 / FTR 893C3 DOUBLE-RELAY PHOTOELECTRIC PHOTOCELLS
    Power supply 12/24Vac-dc.
    Range: 2,5m indoors.
    Transmitter cable 4 metres – Receiver cable 4 metres.

    SINGLE-BEAM INFRARED BARRIER PHOTOELECTRIC PHOTOCELLS
    Overall dimensions 90 x 50 x 20.

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

  • HOT

    HOT

    HOT – Electronic heater with temperature probe for 230V EVO2000 EVO2000T motors.
    All the EVO series and for sliding gate motors.

    HOT

    48,00 + TAX
  • RQM504C2

    RQM504C2 – 433MHz STANDARD MIN 2-CHANNEL RECEIVER IN BOX (12 / 24Vac-dc).

    RQM504C2 – 433MHz STANDARD INDOOR MINI 2-CHANNEL RECEIVER IN BOX (12 / 24Vac-dc).
    The unit RQM504C2 is an electronic circuit with a 10-way terminal block; Fitted with 2 relay
    channels which can be set to ON/OFF or impulsive.
    Possibility of memorising up to 1000 codes.

    ABS indoor enclosure – IP20.
    Overall dimensions(mm) 95 x 75 x 25.

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

    51,0059,00 + TAX

    RQM504C2

    51,0059,00 + TAX
  • RQM504C1

    RQM504C1 – 433MHz STANDARD MIN 1-CHANNEL RECEIVER IN BOX (12 / 24Vac-dc).

    RQM504C1 – 433MHz STANDARD INDOOR MINI 1-CHANNEL RECEIVER IN BOX (12 / 24Vac-dc).
    The unit RQM504C1 is an electronic circuit with a 07-way terminal block; Fitted with 1 relay
    channels which can be set to ON/OFF or impulsive.
    Possibility of memorising up to 1000 codes.
    ABS indoor enclosure – IP20.
    Overall dimensions(mm) 80 x 50 x 22.

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

    RQM504C1

    51,00 + TAX
  • CDR999 PHOTOCELL

    CDR999 – PHOTOCELL WITH  SURFACE MOUNT CASE
    IP55 RANGE 10M

    CDR999 PHOTOCELL – PHOTOELECTRIC OR PHOTOCELLS IN A SHOCKPROOF CASE IP55
    Maximum range 10m
    Power supply 12/24Vac-dc
    Protection grade IP55
    Transmitter and receiver housed in waterproof cases.
    Self locking adjustable lens which can be rotated horizontally
    through plus or minus 90° and vertically through plus or minus 30°
    with respect to the standard installation position.
    It is possible to connect up to 3 pairs of photocells and synchronize
    the transmission (multiplex system).
    Double relays on the receiver with digital control increase the security
    and safety level of the output part (the part that furnishes the at rest/
    alarm signal). Jumper for selecting the output contact mode (potential
    free or resistance 8, 2kΩ contacts).

    CDR999 PHOTOCELL – SURFACE-MOUNT PHOTOELECTRIC CELLS, RANGE MAX. 10m

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

    CDR999 PHOTOCELL

    51,00 + TAX

Main Menu