EVO 1200
€510,00 + TAX
EVO1200 / EVO 1200 : OILBATH GEAR MOTORS FOR SLIDING GATES
EVO 1200 /EVO1200 : OILBATH GEAR MOTORS FOR SLIDING GATES 1200Kg
Electromechanical gearmotor in oilbath ideal for industrial sliding gates up to 1200 Kg.
Complete with encoder, magnetic limits and built built-in control unit.
Safe and Precise thanks to the encoder and the slowing down in opening and closing.
Practical thanks to the control unit with plug-in receiver and self-learning function.
Versatile fixing plate with adjustable height and depth.
Reliable with a sturdy aluminum base treated against oxidation and all moving parts in oilbath.
Constant performance over time and in any condition thanks to reduced wear&tear
and the possibility to maintain the oil at the ideal temperature using HOT (optional).
Manual release with coded lock.
If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount
EVO1200 / EVO 1200 : OILBATH GEAR MOTORS FOR SLIDING GATES
EVO 1200 /EVO1200 : OILBATH GEAR MOTORS FOR SLIDING GATES 1200Kg
Electromechanical gearmotor in oilbath ideal for industrial sliding gates up to 1200 Kg.
Complete with encoder, magnetic limits and built built-in control unit.
Safe and Precise thanks to the encoder and the slowing down in opening and closing.
Practical thanks to the control unit with plug-in receiver and self-learning function.
Versatile fixing plate with adjustable height and depth.
Reliable with a sturdy aluminum base treated against oxidation and all moving parts in oilbath.
Constant performance over time and in any condition thanks to reduced wear&tear
and the possibility to maintain the oil at the ideal temperature using HOT (optional).
Manual release with coded lock.
If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount
EVO 1200
230 V electromeccanical gearmotor in oil bath.
For residential/industrial sliding gates up to 1200kg.
Complete with encoder, magnetic limits, electronic brake and a built-in control unit.
Constant performance over time and in any condition thanks to reduced
wear&tear and the possibility to maintain the oil at the ideal temperature using HOT (optional).
The appliance is fitted with a safe and secure key-operated manual
release system protected by a plastic access door.
AUTOMATION FOR SLIDING GATES TELCOMA GEAR MOTORS SERIES EVO
Electromechanical EVO1200 gear motor suitable for gate positioning control and safety
system management. Ideal for residential/industrial sliding gates powered by 230V.
Powerful, rapid and controlled by state of the art electronics, the gate automation
units are fitted with powerful motors backed up by a finely tuned double gear
kinematic system which reduces the stress on the motor and structure caused by
the movement of gates.
The reduction unit stator is made of die cast aluminium and contains a never
ending screw immersed in an oil bath (lubricated with grease for the EVO 1200).
Installation, on a robust and rust proof base, is possible on any structure and the
unit may be fitted both to the right as well as to the left of the passageway.
The integrated programmer of EVO1200 gear motor allows encoder-controlled gate positioning
and selfprogramming thus reducing installation times to a minimum and optimising the
programming procedure.
The electronic control unit of EVO 1200 is completed by the anti-crush and “soft start” and “soft
stop” functions.
TECHNICAL SPECIFICATIONS EVO 1200
Motor power supply 230 V
Max. motor current 3,4 A
Motor Max power 1100 W
Max. torque 24 Nm
Thrust 1000 N
Max gate weight 1200 Kg
Actuator speed 10 m/min
Work cycles intensive
Encoder YES
Magnetic limit switch YES
Thermal protection 150 °C
Oil lubricant TS20
TECHNICAL SPECIFICATIONS BUILT IN CONTROL UNIT EVO 1200
Model T101
Power supply 230 V
Max. current 6,3 A
Electronic slow down YES
GENERAL DATA EVO 1200
Working temperature -20 +55 °C
Protection level IP 44
Weight 15 Kg
Pallet 30 pcs
ACCESSORIES
CREM P
Plastic rack with steel core. M4 28×22 mm, complete with washers and self boring screws 6,3×25.
Pack of 10 pcs 1 m each.
CREM12
Metal rack. M4 30×12 mm, complete with weldable spacers DSC, screws M8x25 TE and washers O 8.
Pack of 4 pcs 1 m each.
KIT SBLESTEVO
External unlocking kit.
CPEVO
Base plate.
RVS
Meccanical brake for gates on sloping ground.
SERIE EDGREOC2 / NOIREOC2 / FM400OC2
2 channels plug in receiver for control unit of SLEVO800 gear motor.
HOT
Electronic heating system with temperature sensor, for 230V motors.
TS20
Oil for EVO 1200. 5 liters.
DSC
Weldable spacers for CREM12 and CREM8.
Pack of 30 pcs.
DAC
Screwable spacers for CREM12 and CREM8.
Pack of 30 pcs.
DAP
Screwable and adjustable spacers for CREM12 and CREM8.
Pack of 3 pcs.
Additional information
Weight | 10 kg |
---|---|
Dimensions | 0,50 × 0,40 × 0,40 m |
Reviews
There are no reviews yet.