ACE 401

In stock

ACE 401 / ACE401  : GEARMOTORS FOR SLIDING GATES 24V

ACE 401 - MOTOR DISCONTINUED IN PHASE OUT
REPLACED BY MOTORS ACE601

ACE 401 / ACE401 : GEARMOTORS FOR SLIDING GATES 24V 400Kg
Electromechanical gearmotor in grease lubrication.
Ideal for industrial sliding gates up to 400 Kg.
Complete with encoder, magnetic limits and built built-in control unit.
Safe and Precise thanks to the encoder and the slowing down in opening and closing.
Practical thanks to the control unit with plug-in receiver and self-learning function.
Versatile fixing plate with adjustable height and depth.
Reliable with a sturdy aluminum base treated against oxidation and all moving parts in oilbath.
Constant performance over time and in any condition thanks to reduced wear&tear
and the possibility to maintain the oil at the ideal temperature using HOT (optional).
Manual release with coded lock.

ACE 401
24 V electromechanical gearmotor, with encoder, magnetic limit switch
and built in control unit.
For gates up to 400 kg

Compare
SKU: TE-ACE401 Categories: , ,

ACE 401 / ACE401  : GEARMOTORS FOR SLIDING GATES 24V

ACE 401 – MOTOR DISCONTINUED IN PHASE OUT
REPLACED BY MOTORS ACE601

ACE 401 / ACE401 : GEARMOTORS FOR SLIDING GATES 24V 400Kg
Electromechanical gearmotor in grease lubrication.
Ideal for industrial sliding gates up to 400 Kg.
Complete with encoder, magnetic limits and built built-in control unit.
Safe and Precise thanks to the encoder and the slowing down in opening and closing.
Practical thanks to the control unit with plug-in receiver and self-learning function.
Versatile fixing plate with adjustable height and depth.
Reliable with a sturdy aluminum base treated against oxidation and all moving parts in oilbath.
Constant performance over time and in any condition thanks to reduced wear&tear
and the possibility to maintain the oil at the ideal temperature using HOT (optional).
Manual release with coded lock.

ACE 401
24 V electromechanical gearmotor, with encoder, magnetic limit switch
and built in control unit.
– electronic programmer ,  control unit;
– motor speed regulation;
– motor drive power regulation;
– slot-in open collector receiver card.
For gates up to 400 kg

AUTOMATION FOR SLIDING GATES TELCOMA GEARMOTORS SERIES ACE

Electromechanical ACE 401 gear motor suitable for gate positioning control and safety
system management. deal for residential sliding gates the unit moves gates up to
16 metres per minute with speed regulation.
Powerful, rapid and controlled by state of the art electronics, the gate automation
units are fitted with powerful motors backed up by a finely tuned double gear
kinematic system which reduces the stress on the motor and structure caused by
the movement of gates.

The reduction unit stator is made of die cast aluminium and contains a never
ending screw and double reduction lubricated with grease.
Installation, on a robust and rust proof base, is possible on any structure and the
unit may be fitted both to the right as well as to the left of the passageway.
The use of direct current motors increases the performance, guarantees high
efficiency, long life and silent running.

The integrated programmer of ACE 401 gear motor allows encoder-controlled gate positioning
and selfprogramming thus reducing installation times to a minimum and optimising the
programming procedure.
The electronic control unit of ACE401 is completed by the anti-crush and “soft start” and “soft
stop” functions.

TECHNICAL SPECIFICATIONS ACE 401

Motor power supply                           24 Vdc
Max. motor current                             6 A
Motor power                                      150 W
Max thrust                                         400 N
Max gate weight                                 400 Kg
Actuator speed (m/min)                     10
Work cycles                                      intensive
Type of central unit                             A124A4
Encoder                                             YES
Magnetic limit switch                           YES
Grease lubricant                                 TS10

TECHNICAL SPECIFICATIONS BUILT IN CONTROL UNIT AF124

Control unit model                           A124A6
Voltage supply                                 230 V
Power supply                                   2 A
Max. current                                    YES
Speed regulation                              YES
Master and Slave configuration          YES
Double input 8K2 for safety edges     YES
Compatible with Prg-LINK                 YES
Compatible with Sun Power               YES

GENERAL DATA ACE 401
Working temperature                         -20 +55°C
Protection level                                 IP44
Weight                                             12,5 Kg

ACCESSORIES ACE 401

CREM P
Plastic rack with steel core. M4 28×22 mm, complete with washers and self boring screws 6,3×25.
Pack of 10 pcs 1 m each.

CREM12
Metal rack. M4 30×12 mm, complete with weldable spacers DSC, screws M8x25 TE and washers O 8.
Pack of 4 pcs 1 m each.

KIT SBLESTEVO
External unlocking kit for ACE 401.

CPEVO
Base plate.

RVS
Meccanical brake for gates on sloping ground.

SERIE  EDGREOC2 / NOIREOC2 / FM400OC2
2 channels plug in receiver for control unit of ACE 401 gear motor.

DSC
Weldable spacers for CREM12 and CREM8.
Pack of 30 pcs.
DAC
Screwable spacers for CREM12 and CREM8.
Pack of 30 pcs.
DAP
Screwable and adjustable spacers for CREM12 and CREM8.
Pack of 3 pcs.

Additional information

Weight 10 kg
Dimensions 0.50 × 0.40 × 0.40 m
Be the first to review “ACE 401”

Your email address will not be published.

Reviews

There are no reviews yet.

See It Styled On Instagram

    No access token

Main Menu