BL824MCB

582,00 + TAX

In stock

BL824MCB - ELECTROMECHANICAL GROUP WITH 24V MOTOR

 BL824MCB  - SELF-LOCKING GROUP MASTER WITH ENCODER 24V MAX. 200KG + NIMH BATTERIES

Encoder-controlled self-locking Master unit including:
- electronic programmer;
- 433MHz FM receiver;
- slot-in battery charger;
- NiMH batteries.
Particularly suited for installations with narrow columns that require
the mounting base to be less than 150mm in width and also for
gates where the hinges are not aligned to the edge of the column
and with gate leaves of up to 2 metres in length (2,5m with a hinged
arm and an electric lock) 200kg maximum weight.
Manual release is carried out using the hexagonal key located inside
the side panel.
Operator arm to be ordered separately.

Compare
SKU: CA-BL824MCB Categories: , , ,

BL824MCB MASTER- ELECTROMECHANICAL GROUP WITH 24V MOTOR

 BL824MCB MOTOR SELF-LOCKING GROUP MASTER WITH ENCODER 24V MAX. 200KG + NIMH BATTERIES FOR SWING GATE WITH HINGED ARM

 BL824MCB MOTOR MASTER Encoder-controlled self-locking Master unit including:
– electronic programmer;
– 433MHz FM receiver;
– slot-in battery charger;
– NiMH batteries.
Particularly suited for installations with narrow columns that require
the mounting base to be less than 150mm in width and also for
gates where the hinges are not aligned to the edge of the column
and with gate leaves of up to 2 metres in length (2,5m with a hinged
arm and an electric lock) 200kg maximum weight.
Manual release is carried out using the hexagonal key located inside
the side panel.
Operator arm to be ordered separately.

BL824MCB MASTER – ELECTROMECHANICAL UNIT WITH 24V MOTOR

BL824MCB MOTOR MASTER a complete automatic device for swing gates with one or two gate leaves,
the system is made up of a Master unit and a Slave unit powering the second hinged gate.

Installation is facilitated and the geared motor is well anchored by the special practical cast
aluminium wall (or column) bracket predisposed for any type of fastening.
The compact and robust fastening bracket allows the automation to be fitted to very narrow
columns. The extremely robust cast aluminium operator arms are fitted with joints for all
applications and are able to drive hinged gates with different constructive characteristics.

The electronic programmerof BL824MCB MOTOR is factory fitted with a graphic LCD display (128 x 128 pixels)
with backlighting in six different languages.
The menu allows you to rapidly set the system parameters including:
the sequential button mode, automatic reclosing, warning lamp preflashing,
intermittent warning lamp activation, indicator light and photoelectric cell
function setting etc.

Control units with LC

The electronics card, thanks to the presence of the real-time
clock, allows you to set 10 events (shown on the display).
These events permit you to regulate the opening and closing of the motor at different times during the
day within 3 weekly time bands (Mon-Fri, Sat-Sun, Mon-Sun).
The events can be enabled or disabled (during holiday periods) either from the menu or by means of a radio
channel.

Repositioning takes place automatically whenever foreign objects get in the way of
the gate as it is moving. The electronic control unit of BL824MCB MOTOR MASTER is completed by the anti-crush and “soft
start” and “soft stop” functions.
Compatible with the INTPRG-3G/WF system that allows the monitoring and programming of
system parameters from remote positions.
Multi-decoding:
The product range is factory fitted with a multi-decoding remote control module (system
S449 – S486 – S504 – S508).

OPERATOR ARM TECHNICAL SPECIFICATIONS BL824MCB MOTOR MASTER

BL824MCB MASTER Motor power supply         Vdc           24
Nominal electrical input                                 A              2 3 2
Power input                                                  W             50
Duty cycle                                                     %            70
Opening time 90°                                           s             14 (12*)
Maximum opening angle                                  °             130
Maximum torque                                            Nm          270
Protection grade                                             IP            44
* using a straight operator arm

ELECTRONIC PROGRAMMER TECHNICAL DATA

Power supply                                            Vac 230
Nominal electrical input                             A 1,2
Maximum power yield                                W 250
Power output for 1 or 2 motors                   W 60 + 60
Class II device Cls

BUILT IN RECEIVER CARD

Reception frequency                                       MHz 433.92 / 868,3
Number of channels / number of functions       No 4 / 8
Number of stored codes                                  No 300 / 1000

ACCESSORIES BL824MCB MASTER

BL824ARM : STANDARD HINGED OPERATOR ARM
in spray-painted cast aluminium.

BL824DRM : STRAIGHT ARM WITH SLIDING GUIDE
in spray-painted cast aluminium.

BL3924GU2 : 1000mm GUIDE FOR SPECIAL OPENING REQUIREMENTS
in aluminium.
Lots of 2 pcs.

KBNIMH-3 : KIT BATTERY CHARGER + NIMH BATTERIES
Allows the BL824MCB MASTER unit for swing gate to work during blackouts.

CABPC10 : 10m CABLE
with end sleeves.

Additional information

Weight 15 kg
Dimensions 0,60 × 0,40 × 0,40 m
Be the first to review “BL824MCB”

Your email address will not be published. Required fields are marked *

CAPTCHA ImageChange Image

Reviews

There are no reviews yet.

See It Styled On Instagram

    No access token

Main Menu