Telcoma brand and all TELCOMA products today merged into CARDIN products
-
BLADE5
BLADE5 – REVERSIBLE ELECTROMECHANICAL RAM WITH 230V MOTOR
BLADE5 MOTOR – REVERSIBLE SELF-LOCKING WITH ENCODER 230V MAX WEIGHT. 300KG 5M
Reversible BLADE5 encoder-controlled ram actuators with mechanical travel limits for 5m swing gate.
An electric lock must be fitted to guarantee that the gate leaf locks in the
closed position.
Supplied with all the fittings necessary for mounting one ram including
the front and rear brackets.
Cardin ECU to be ordered separately T624.
Long version for gates max. length 5m, max. weight 300kg.BLADE5 MOTOR USE
Reversible electromechanical piston.
Worm screw automation for leaves max.
Length 5m, weight max. 300kg.€300,00 + TAXBLADE5
€300,00 + TAX -
BLADE524REV
BLADE524REV – REVERSIBLE ELECTROMECHANICAL RAM WITH 24V MOTOR
BLADE524REV MOTOR – REVERSIBLE SELF-LOCKING WITH ENCODER 24V MAX WEIGHT. 300KG
Reversible BLADE524REV encoder-controlled ram with mechanical travel limits.
An electric lock must be fitted to guarantee that the gate leaf locks in the
closed position.
Supplied with all the fittings necessary for mounting one ram including
the front and rear brackets.
Cardin ECU to be ordered separately T624.
Long version for gates max. length 5m, max. weight 300kg.BLADE524REV MOTOR USE
irreversible electromechanical piston.
Worm screw automation for leaves max.
Length 5m, weight max. 300kg.€350,00 + TAXBLADE524REV
€350,00 + TAX -
SUNPOWER
SUN POWER – KIT SOLAR PANEL POWER SUPPLY
SUNPOWER – POWER SUPPLY KIT
SUN POWER Solar panels for use with all 24Vdc automation.
Two solar panels complete with adjustable brackets.
Watertight box with batteries, command electronics and charger.
This product uses solar energy to power automatic devices
for gates, garage doors, and road barriers etc. situated far
away from the mains power lines, all without needing any sort
of excavation or bric work. SUN POWER is compatible with
all the Cardin Trade control units for 24Vdc motors, making
them independent, reducing electricity costs and respecting
the environment.€301,00 + TAXSUNPOWER
€301,00 + TAX -
STAR1E
STAR 1E /STAR1E – EELECTROMECHANICAL ACTUATOR FOR OVERHEAD DOORS
STAR 1E / STAR1E – EELECTROMECHANICAL ACTUATOR FOR OVERHEAD DOORS
STAR1E Electromechanical gearmotor 230 V ideal for garage counterbalanced door up to 8 m2.
Safe and Precise thanks to the encoder and the slowing down in opening and closing.
Practical thanks to the control unit with plug-in receiver and self-learning function.
LED courtesy light.
Versatile, with a wide choice of accessories for any installation need
STAR1E
230 V STAR1E irreversible electromechanical gearmotor for garage counterbalanced door.
Without control unit.€276,00 + TAXSTAR1E
€276,00 + TAX -
ACE FAST
ACE FAST / ACEFAST : GEARMOTORS FOR SLIDING GATES 24V
ACE FAST / ACEFAST : GEARMOTORS FOR SLIDING GATES 24V 300Kg
Electromechanical gearmotor in grease lubrication.
Ideal for industrial sliding gates up to 300 Kg.
Complete with encoder, magnetic limits and built built-in control unit.
Safe and Precise thanks to the encoder and the slowing down in opening and closing.
Practical thanks to the control unit with plug-in receiver and self-learning function.
Versatile fixing plate with adjustable height and depth.
Reliable with a sturdy aluminum base treated against oxidation and all moving parts in oilbath.
Constant performance over time and in any condition thanks to reduced wear&tear
and the possibility to maintain the oil at the ideal temperature using HOT (optional).
Manual release with coded lock.ACE FAST
24 V electromechanical gearmotor, with encoder, magnetic limit switch
and built in control unit.
For gates up to 300 kg€282,00 + TAXACE FAST
€282,00 + TAX -
SLACEFAST
SLACEFAST – IRREVERSIBLE GEARMOTOR 24V FOR SLIDING GATES 300Kg
SLACEFAST / ACE FAST -GEARMOTOR 24V FOR SLIDING GATES UP TO 300Kg
Electromechanical gearmotor ideal for residential sliding gates.
Complete with encoder, magnetic limits and advanced built-in control unit.The automation SLACEFAST 24V is made up of self-locking gear motor controlled by
encoder and magnetic travel limits with an in-built:
– electronic programmer;
– motor speed regulation;
– motor drive power regulation;
– slot-in open collector receiver card.The programmer allows you to rapidly set the system parameters
including: the sequential button mode, automatic reclosing, warning
lamp pre-flashing, flashing warning lamp activation, indicator light and
photoelectric cell function setting etc.€282,00 + TAXSLACEFAST
€282,00 + TAX -
ASY5
ASY 5 / ASY5 – ELECTROMECHANICAL PISTON 230/24V FOR SWING GATES
ASY5 – IS IN PHASE OUT
MOTOR REPLACED BY THE MODEL : BLADE5ASY5 – ELECTROMECHANICAL RAM WITH A 230V MOTOR 5M
Self-locking encoder-controlled ram with mechanical travel limits. The
geared motor locks the gate leaf in the closed position.
Supplied with all the fittings necessary for mounting one ram including
the front and rear brackets in galvanised steel.
ECU to be ordered separately T600.ASY5
Standard version elettromeccanical RAM 230V IRREVERSIBLE for gates max. length 5m,
max. weight 350kg. -
T400 CONTROL UNIT
T400 ELECTRONI CONTROL UNIT 230V
T400 ELECTRONIC CONTROL UNIT FOR ONE 400 V THREEPHASE MOTOR OR ONE SINGLEPHASE 230V MOTOR
CONTROL UNIT T 400 Operation with or without encoder control.
Complete with self-learning function, two separate connections for
balanced safety edges (EN 12978). Connection for slot-in radio card. Travel limit inputs.
– new external 32VA transformer;
– third programming button;
– flashing warning light output;
– second channel OC2 output (contact US1);
– terminal blocks for motor capacitor connection;
– connection for the keypad TAST3F;
– BSA and BSC inputs for 8K2 safety edges.€229,00 + TAXT400 CONTROL UNIT
€229,00 + TAX -
T224 CONTROL UNIT
T224 – CONTROL UNIT MOTORS 24V
T224 – CONTROL UNIT IN PHASE OUT
REPLACED BY THE : T624T224 / T 224 – ELECTRONIC PROGRAMMER FOR ONE OR TWO 24V MOTORS
Control unit T224 for 2 motors 24 Vdc, with torque adjustment, slowing down and encoder
Encoder controlled programmer with torque limitation, deceleration,
inputs for safety edges in both the opening and closing directions,
safety device exclusion via dip-switch:
– second channel OC2 output (contact US1);
– connection for the keypad TAST3F;
– BSA and BSC inputs for 8K2 safety edges.€199,00 + TAXT224 CONTROL UNIT
€199,00 + TAX -
T624 CONTROL UNIT
T624 – CONTROL UNIT MOTORS 24V
T624 / T 624 – ELECTRONIC PROGRAMMER FOR ONE OR TWO 24V MOTORS
Control unit T624 for 2 motors 24 Vdc, with torque adjustment, slowing down and encoder
Encoder controlled programmer with torque limitation, deceleration,
inputs for safety edges in both the opening and closing directions,
safety device exclusion via dip-switch:
– second channel OC2 output (contact US1);
– connection for the keypad TAST3F;
– BSA and BSC inputs for 8K2 safety edges.MAINS POWER SUPPLY 230Vac
MOTOR OUTPUT 24Vdc
PROTECTION GRADE IP55
FIREPROOFING GRADE V2
AUTOMATIC GATE/DOOR PROGRAMMING€199,00 + TAXT624 CONTROL UNIT
€199,00 + TAX -
BOXMOLE
BOXMOLE – UNDERGROUND ACTUATOR FOR SWING GATES
BOX MOLE – EMBEDDING CASE IN PHASE OUT
REPLACED BY : HLBOX HLBOXCBOXMOLE / BOX MOLE – UNDERGROUND ACTUATOR FOR SWING GATES
Underground gearmotor 24 V ideal for swing gates up to 3 meters.
Complete with encoder and easy release for manual operation it is safe, practical and reliable.
Safe and Precise thanks to the encoder and the slowing down in opening and closing
Practical thanks to the control unit with plug-in receiver and self-learning function.
Adjustable mechanical limits in the foundation box.
Reliable thanks to the sturdy mechanical parts and the powerful motor in perfectly water
resistant aluminum shells.€189,00 + TAXBOXMOLE
€189,00 + TAX -
T600 CONTROL UNIT
T600 ELECTRONI CONTROL UNIT 230V
T 600 ELECTRONIC CONTROL UNIT FOR TWO 230V MOTORS
Control unit T600 for 1/2 motors 230 Vdc, with torque adjustment, slowing down and encoder.
Encoder controlled programmer with torque limitation, deceleration
and safety device exclusion via dip-switch:
– new external 32VA transformer;
– third programming button;
– flashing warning light output;
– second channel OC2 output (contact US1);
– terminal blocks for motor capacitor connection;
– connection for the keypad TAST3F;
– BSA and BSC inputs for 8K2 safety edges.€176,00 + TAXT600 CONTROL UNIT
€176,00 + TAX