-
RCQ868-WF
RCQ868-WF – 868MHz RECEIVER WITH LCD DISPLAY AND WIFI
RCQ868-WF – 868MHz RECEIVER WITH LCD DISPLAY AND WIFI FUNCTIONS (12/24Vac-dc).
The RCQ868-WF receiver can be fitted with up to four programmable relay
modules MCCMORPHM1 (impulsive, ON-OFF or timer controlled).
1 relay inserted.
Possibility of memorising up to 3000 codes.
USB connection and 2G-3G-WiFi module for remote user and
activation of the output relays.
The RCQ433/868-3G10 receivers include a 10 year subscription
with our partner Vodafone.All weather box in ABS – IP55.
Overall dimensions 135 x 175 x 85.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€229,00 + TAXRCQ868-WF
€229,00 + TAX -
PRG900
PRG900 – GRAPHIC DISPLAY CONTROL UNIT FOR 1 OR 2 24V MOTORS
PRG900 – ELECTRONIC CONTROL UNIT PROGRAMMERS FOR THE MANAGEMENT OF ONE OR TWO MOTORS
Electronic PRG900 control unit programmer for the control of 24Vdc hinged gates with
intelligent time control functions that allow you to control the position of
the hinged and sliding gates, .The PRG900 control uniti fitted with a multi-decoding module S449
– S486 – S504 – S508. Gate travel time programming is fully automatic
and guided by a 6-digit display which allows you to visualise the number
of manoeuvres carried out and to set several parameters such as the
type of motor, the torque setting and the limited opening distance.Dip-switches allow you to set the system parameters including: the
sequential button mode, automatic reclosing, warning lamp pre-flashing,
intermittent warning lamp activation, indicator light and photoelectric cell
function setting and electric lock enable.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount -
T224 CONTROL UNIT
T224 – CONTROL UNIT MOTORS 24V
T224 – CONTROL UNIT IN PHASE OUT
REPLACED BY THE : T624T224 / T 224 – ELECTRONIC PROGRAMMER FOR ONE OR TWO 24V MOTORS
Control unit T224 for 2 motors 24 Vdc, with torque adjustment, slowing down and encoder
Encoder controlled programmer with torque limitation, deceleration,
inputs for safety edges in both the opening and closing directions,
safety device exclusion via dip-switch:
– second channel OC2 output (contact US1);
– connection for the keypad TAST3F;
– BSA and BSC inputs for 8K2 safety edges.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€199,00 + TAXT224 CONTROL UNIT
€199,00 + TAX -
T624 CONTROL UNIT
T624 – CONTROL UNIT MOTORS 24V
T624 / T 624 – ELECTRONIC PROGRAMMER FOR ONE OR TWO 24V MOTORS
Control unit T624 for 2 motors 24 Vdc, with torque adjustment, slowing down and encoder
Encoder controlled programmer with torque limitation, deceleration,
inputs for safety edges in both the opening and closing directions,
safety device exclusion via dip-switch:
– second channel OC2 output (contact US1);
– connection for the keypad TAST3F;
– BSA and BSC inputs for 8K2 safety edges.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€199,00 + TAXT624 CONTROL UNIT
€199,00 + TAX -
T600 CONTROL UNIT
T600 ELECTRONIC CONTROL UNIT 230V
T600 / T 600 ELECTRONIC CONTROL UNIT FOR TWO 230V MOTORS
Control unit T600 for 1/2 motors 230 Vdc, with torque adjustment, slowing down and encoder.
Encoder controlled programmer with torque limitation, deceleration
and safety device exclusion via dip-switch:
– new external 32VA transformer;
– third programming button;
– flashing warning light output;
– second channel OC2 output (contact US1);
– terminal blocks for motor capacitor connection;
– connection for the keypad TAST3F;
– BSA and BSC inputs for 8K2 safety edges.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€176,00 + TAXT600 CONTROL UNIT
€176,00 + TAX -
T201 ELECTRONIC CONTROL UNIT
T201 – ELECTRONIC CONTROL UNIT
T201 – ELECTRONIC CONTROL UNIT IS PHASE OUT
IT IS REPLACED BY THE T600 – ELECTRONIC CONTROL UNITT201 – ELECTRONIC CONTROL UNIT
Control unit to controll 1/2 230V motors with torque regulation and slowing down.
It can operate with or without encoder.
Equipped with self-learning function.
Connector for radio receiver OC2 series.
Inputs for the stroke end.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€176,00 + TAXT201 ELECTRONIC CONTROL UNIT
€176,00 + TAX -
SPW10
SPW 10 – SUPPLEMENTARY SOLAR PANEL KIT FOR SUN POWER
SPW10 –SUPPLEMENTARY SOLAR PANEL KIT FOR SUN POWER
SUPPLEMENTARY PHOTOVOLTAIC SOLAR PANEL KIT :
Two photovoltaic panels complete with adjustable brackets.
SPW10 Kit to increase the power capacity of SUNPOWER Power cupply systemIf you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€168,00 + TAXSPW10
€168,00 + TAX -
PRG230M2
PRG230M2 – ELECTRONIC MICROPROCESSOR CONTROL UNIT FOR 230V MOTORS
PRG230M2 – ELECTRONIC PROGRAMMERS FOR THE CONTROL OF TWO 230V MOTORS
WITH MAXIMUM POWER YIELD 470 + 470W
Digital work time control separately memorised for each gate leaf guided by a
6-digit display. Possible operation without mechanical travel limits. Torque setting.
Maximum power initial thrust control, torque limitation and deceleration
management with deceleration zone control. The appliance is fitted with an
interface for the insertion of a standard Cardin radio receiver card.
Suitable for the control of automatic gates and doors with two 230V motors.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€168,00 + TAXPRG230M2
€168,00 + TAX -
PRG304ETC
PRG304ETC – ELECTRONIC MICROPROCESSOR CONTROL UNIT FOR 230V MOTORS
PRG304ETC – ELECTRONIC CONTROL UNIT PROGRAMMERS FOR TWO 230V MOTORS
WITH MAXIMUM POWER YIELD 650W.
ELECTRONIC PROGRAMMER WITH EXTERNAL CONTROL BUTTONS
Digital work time control. Command inputs: TA, TC and TB. Security inputs:
photocells, safety edge (N.C. contact or 8.2 kΩ), digital safety edge.
Output for a courtesy light 230Vac 300W and for a led warning light. The
appliance is supplied with a S449, 433MHz, FM decoder.
Suitable for the control of automatic rolling shutters.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€156,00 + TAXPRG304ETC
€156,00 + TAX -
PRG807001
PRG807001 – ELECTRONIC MICROPROCESSOR CONTROL UNIT FOR 230V MOTORS
PRG807001 – ELECTRONIC CONTROL UNIT PROGRAMMERS FOR TWO 230V MOTORS
WITH MAXIMUM POWER YIELD 450W.
Digital work time control separately memorised for each gate leaf guided by a
6-digit display. Possible operation without mechanical travel limits. Torque setting.
Maximum power initial thrust control, torque limitation and deceleration
management with deceleration zone control. The appliance is fitted with an
interface for the insertion of a standard Cardin radio receiver card.
Suitable for the control of automatic gates and doors with two 230V motors.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€153,00 + TAXPRG807001
€153,00 + TAX -
T124 CONTROL UNIT
T124 – CONTROL UNIT MOTORS 24V
T124 / T 124 – ELECTRONIC PROGRAMMER FOR ONE OR TWO 24V MOTORS
Control unit T124 for 1 motor 24 Vdc, with torque adjustment, slowing down and encoder
Encoder controlled programmer with torque limitation, deceleration,
inputs for safety edges in both the opening and closing directions,
safety device exclusion via dip-switch:
– second channel OC2 output (contact US1);
– connection for the keypad TAST3F;
– BSA and BSC inputs for 8K2 safety edges.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€152,00 + TAXT124 CONTROL UNIT
€152,00 + TAX -
T101 CONTROL UNIT
T101 ELECTRONI CONTROL UNIT 230V
T 101 ELECTRONIC CONTROL UNIT FOR TWO 230V MOTORS
Control unit T101 for 1 motor 230 Vdc, with torque adjustment, slowing down and encoder.
Encoder controlled programmer with torque limitation, deceleration
and safety device exclusion via dip-switch:
– new external 32VA transformer;
– third programming button;
– flashing warning light output;
– second channel OC2 output (contact US1);
– terminal blocks for motor capacitor connection;
– connection for the keypad TAST3F;
– BSA and BSC inputs for 8K2 safety edges.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€122,00 + TAXT101 CONTROL UNIT
€122,00 + TAX