CARDIN Control Unit type PRO and TRADE
-
RPQ504IT0 RADIO PROGRAMMER ON/OFF
RPQ504IT0 – 433MHz RADIO PROGRAMMER ON/OFF + TIMER (230V-2000W)
RPQ504IT0 – 433MHz RADIO PROGRAMMERS ON/OFF + TIMER (2000W)
For specific uses such as the remote control of external (gardens) and
internal lighting; the remote control of power sockets. Connecting the
radioprogrammer to a light detection device will prevent it from switching
on the lighting system during the daytime.Possibility of memorising up to
1000 user codes. Timer settings: from 1 min. to 23 hrs. 59 min.
All weather box in ABS – IP55.
Overall dimensions 139 x 115 x 44.€81,00 + TAXRPQ504IT0 RADIO PROGRAMMER ON/OFF
€81,00 + TAX -
RPQ508 RADIOPROGRAMMER ROLLING GRILLS
RPQ508 – 868MHz RADIOPROGRAMMER FOR ROLLING GRILLS (230V-600W)
RPQ508 – 868MHz RADIOPROGRAMMER FOR ROLLING GRILLS (230V-600W)
Logic integrated into the receiver and output for the control of one motor.
Power supply output for a pair of Cardin photoelectric cells. Possibility of
memorising up to 1000 transmitters.
All weather box in ABS – IP55.
Overall dimensions 139 x 115 x 44.€86,00 + TAXRPQ508 RADIOPROGRAMMER ROLLING GRILLS
€86,00 + TAX -
RPQ504 RADIOPROGRAMMER ROLLING GRILLS
RPQ504 – 433MHz RADIOPROGRAMMER FOR ROLLING GRILLS (230V-600W)
RPQ504 – 433MHz RADIOPROGRAMMERS FOR ROLLING GRILLS (230V-600W)
Logic integrated into the receiver and output for the control of one motor.
Power supply output for a pair of Cardin photoelectric cells. Possibility of
memorising up to 1000 transmitters.
All weather box in ABS – IP55.
Overall dimensions 139 x 115 x 44.€84,00 + TAXRPQ504 RADIOPROGRAMMER ROLLING GRILLS
€84,00 + TAX -
RCQ508W00 MULTIPROTOCOL INTERFACE
RCQ504NC1 – 433MHz MODULAR RECEIVER IN BOX (12 / 24Vac-dc).
RCQ504NC1 – 433MHz MODULAR STANDARD OUTDOOR RECEIVER IN BOX (12 / 24Vac-dc).
The unit RCQ504NC1 receiver can be fitted with up to four interchangeable relay modules
MCCMORPHM1, which can be set to ON/OFF or impulsive.
1 relay inserted.
Possibility of memorising up to 1000 codes.ABS outdoor enclosure – IP55.
Overall dimensions(mm) 148 x 118 x 40.€99,00 + TAXRCQ508W00 MULTIPROTOCOL INTERFACE
€99,00 + TAX -
RCQ504W00 MULTIPROTOCOL INTERFACE
RCQ504W00 – 433MHz MULTIPROTOCOL INTERFACE IN BOX (12 / 24Vac-dc).
RCQ504W00 – 433MHz MODULAR STANDARD OUTDOOR MULTIPROTOCOL INTERFACE IN BOX (12 / 24Vac-dc).
Power supply 12/24Vac-dc.
Electrical input 20mA.
Overall dimensions 148 x 118 x 40.
All weather box in ABS – IP55.
Carrier frequency 433,92MHz – 868,3MHz.
The interface is able to decode a radio frequency signal coming
from a S504-S508 transmitter or via cable from a DKS1000T,
DKSTPT, DKSDUALT and output a Wiegand/ISO-3554 digital signal,
containing the transmitter code, in 13 different formats.
It is fitted with a USB for connection to a PC and an input that can be
connected to a timer or a switch with the aim of enabling or disabling
the interface over different time periods. Rolling Code management
with transmitter memorization on the interface.€95,00 + TAXRCQ504W00 MULTIPROTOCOL INTERFACE
€95,00 + TAX -
KT-RQM504C1-TXQ504C2
RQM504C2 – 433MHz STANDARD MIN 2-CHANNEL RECEIVER IN BOX (12 / 24Vac-dc).
RQM504C2 – 433MHz STANDARD INDOOR MINI 2-CHANNEL RECEIVER IN BOX (12 / 24Vac-dc).
The unit RQM504C2 is an electronic circuit with a 10-way terminal block; Fitted with 2 relay
channels which can be set to ON/OFF or impulsive.
Possibility of memorising up to 1000 codes.ABS indoor enclosure – IP20.
Overall dimensions(mm) 95 x 75 x 25.€99,00€130,00+ TAXKT-RQM504C1-TXQ504C2
€99,00€130,00+ TAX -
RQM508C1
RQM508C1 – 868MHz STANDARD MIN 1-CHANNEL RECEIVER IN BOX (12 / 24Vac-dc).
RQM508C1 – 868MHz STANDARD INDOOR MINI 1-CHANNEL RECEIVER IN BOX (12 / 24Vac-dc).
The unit RQM504C2 is an electronic circuit with a 7-way terminal block; Fitted with 1 relay
channels which can be set to ON/OFF or impulsive.
Possibility of memorising up to 1000 codes.ABS indoor enclosure – IP20.
Overall dimensions(mm) 80 x 50 x 22.€52,00 + TAXRQM508C1
€52,00 + TAX -
RQM504C1
RQM504C2 – 433MHz STANDARD MIN 2-CHANNEL RECEIVER IN BOX (12 / 24Vac-dc).
RQM504C2 – 433MHz STANDARD INDOOR MINI 2-CHANNEL RECEIVER IN BOX (12 / 24Vac-dc).
The unit RQM504C2 is an electronic circuit with a 10-way terminal block; Fitted with 2 relay
channels which can be set to ON/OFF or impulsive.
Possibility of memorising up to 1000 codes.ABS indoor enclosure – IP20.
Overall dimensions(mm) 95 x 75 x 25.€51,00 + TAXRQM504C1
€51,00 + TAX -
T124 CONTROL UNIT
T124 – CONTROL UNIT MOTORS 24V
T124 / T 124 – ELECTRONIC PROGRAMMER FOR ONE OR TWO 24V MOTORS
Control unit T124 for 1 motor 24 Vdc, with torque adjustment, slowing down and encoder
Encoder controlled programmer with torque limitation, deceleration,
inputs for safety edges in both the opening and closing directions,
safety device exclusion via dip-switch:
– second channel OC2 output (contact US1);
– connection for the keypad TAST3F;
– BSA and BSC inputs for 8K2 safety edges.€152,00 + TAXT124 CONTROL UNIT
€152,00 + TAX -
T224 CONTROL UNIT
T224 – CONTROL UNIT MOTORS 24V
T224 – CONTROL UNIT IN PHASE OUT
REPLACED BY THE : T624T224 / T 224 – ELECTRONIC PROGRAMMER FOR ONE OR TWO 24V MOTORS
Control unit T224 for 2 motors 24 Vdc, with torque adjustment, slowing down and encoder
Encoder controlled programmer with torque limitation, deceleration,
inputs for safety edges in both the opening and closing directions,
safety device exclusion via dip-switch:
– second channel OC2 output (contact US1);
– connection for the keypad TAST3F;
– BSA and BSC inputs for 8K2 safety edges.€199,00 + TAXT224 CONTROL UNIT
€199,00 + TAX -
CC242ETOP
CC242ETOP – GRAPHIC DISPLAY CONTROL UNIT FOR 1 OR 2 24V MOTORS + CHARGER + NiMH BATTERIES
CC242ETOP – ELECTRONIC CONTROL UNIT PROGRAMMERS FOR THE MANAGEMENT
OF ONE OR TWO ENCODER-CONTROLLED MOTORSElectronic CC242ETOP control unit programmer for encoder-controlled 24Vdc motors that allow
the precise position control of hinged and sliding gates fitted with a
multi-decoding module S449 – S486 – S504 – S508.
Batteries and battery charger in the CC242ETOPCB and
CC242EXTOPCB versions.The electronic CC242ETOP control unit programmer is factory fitted with a graphic LCD display
(128 x 128 pixels) with backlighting in six different languages.
The menu allows you to read the number of manoeuvres carried out
and to rapidly set the system parameters including: the sequential button
mode, automatic reclosing, warning lamp pre-flashing, intermittent
warning lamp activation, indicator light, photoelectric cell function setting
and electric lock enable etc.€252,00 + TAXCC242ETOP
€252,00 + TAX -
PRG900
PRG900 – GRAPHIC DISPLAY CONTROL UNIT FOR 1 OR 2 24V MOTORS
PRG900 – ELECTRONIC CONTROL UNIT PROGRAMMERS FOR THE MANAGEMENT OF ONE OR TWO MOTORS
Electronic PRG900 control unit programmer for the control of 24Vdc hinged gates with
intelligent time control functions that allow you to control the position of
the hinged and sliding gates, .The PRG900 control uniti fitted with a multi-decoding module S449
– S486 – S504 – S508. Gate travel time programming is fully automatic
and guided by a 6-digit display which allows you to visualise the number
of manoeuvres carried out and to set several parameters such as the
type of motor, the torque setting and the limited opening distance.Dip-switches allow you to set the system parameters including: the
sequential button mode, automatic reclosing, warning lamp pre-flashing,
intermittent warning lamp activation, indicator light and photoelectric cell
function setting and electric lock enable.€222,00 + TAXPRG900
€222,00 + TAX
