Economic line with basic but professional functionality like the PRO line
-
CDRX12 PHOTOCELL
CDRX12 – PHOTOCELL WITH SURFACE MOUNT CASE
IP55 RANGE 10MCDRX12 PHOTOCELL – PHOTOELECTRIC OR PHOTOCELLS IN A SHOCKPROOF CASE IP55
CDRX12 – HYBRID INFRARED BARRIERS PHOTOCELLS WITH ADJUSTABLE LENSES
RECEIVER POWER SUPPLY 12/24Vac-dc
PROJECTOR POWER SUPPLY 3V WITH A LITHIUM BATTERY
MAXIMUM RANGE 10m
PROTECTION GRADE IP55CDRX12 PHOTOCELLS are a next generation infrared safety system, particularly suited to the protection of passageways (traffic
and pedestrian) that are fitted with automatic opening and closing systems. The electronic circuit respects the
most up to date standards and regulations and conforms to the standard 3 of the UNI EN 13849-1 (update of the
EN954-1). It is possible to connect up to 3 pairs of photocells and synchronise the transmission (multiplex system).
The necessity of guaranteeing greater ambient noise immunity has led to the evolution of both the transmitter and
receiver cards. The system is based on the criteria “resistance to single failure” that guarantees the maintenance of
safety in case of electrical problems.
The receiver should be installed close to the electronic programmer and wired up drawing its 12/24V power supply
directly from the programmer while the projector can be installed on any surface and doesn’t require wiring. Power
is supplied by a solar panel when light is present and by a 3V lithium battery when insufficient light is available.
The batteries lifespan can be optimised by setting the energy saving function and varying the cut-in time and the
installation distance between the two photoelectric cells.€96,00 + TAXCDRX12 PHOTOCELL
€96,00 + TAX -
CDR999 PHOTOCELL
CDR999 – PHOTOCELL WITH SURFACE MOUNT CASE
IP55 RANGE 10MCDR999 PHOTOCELL – PHOTOELECTRIC OR PHOTOCELLS IN A SHOCKPROOF CASE IP55
Maximum range 10m
Power supply 12/24Vac-dc
Protection grade IP55
Transmitter and receiver housed in waterproof cases.
Self locking adjustable lens which can be rotated horizontally
through plus or minus 90° and vertically through plus or minus 30°
with respect to the standard installation position.
It is possible to connect up to 3 pairs of photocells and synchronize
the transmission (multiplex system).
Double relays on the receiver with digital control increase the security
and safety level of the output part (the part that furnishes the at rest/
alarm signal). Jumper for selecting the output contact mode (potential
free or resistance 8, 2kΩ contacts).CDR999 PHOTOCELL – SURFACE-MOUNT PHOTOELECTRIC CELLS, RANGE MAX. 10m
€51,00 + TAXCDR999 PHOTOCELL
€51,00 + TAX -
ROCK – MOLE – KIT-ROCK2HL
ROCK230 HL251CL + KIT-ROCK2HL : UNDERGOUND GEARMOTOR 230V
ROCK 230 – DISCONTINUED PHASE OUT MOTOR
REPLASED BY KIT : HLXCORE230 + KIT-ROCK2HLROCK230 – HLXCORE230 + KIT-ROCK2HL : UNDERGOUND GEARMOTOR 230V
HL251CL 230 V underground electromechanical gearmotor .
Ideal for swing gates up to 3 meters.
Equipped with encoder and easy release.
The KIT replaces the discontinued phase out ROCK motor.
Safe thanks to the precision and sensitivity of the encoder and to the slowdowns in opening and closing.
Practical thanks to the control unit with quick connection and self-learning receiver.
Adjustable limit switches integrated in the case.
Reliable with perfect watertightness and solid and robust mechanics.ROCK230 -KIT-ROCK2HL + HLXCORE230 230V
HL251CL 230V underground electromechanical gearmotor for leaves up to 3 m.
Compatible with BOX ROCK foundation boxes or embedding ROCK CASE
using the adaptation kit : KIT-ROCK2HL€395,00 + TAXROCK – MOLE – KIT-ROCK2HL
€395,00 + TAX -
ROCK 230 – HLXCORE230 + KIT-ROCK2HL
ROCK230 – HLXCORE230 + KIT-ROCK2HL : UNDERGOUND GEARMOTOR 230V
ROCK 230 – DISCONTINUED PHASE OUT MOTOR
REPLASED BY KIT : HLXCORE230 + KIT-ROCK2HLROCK-230 – HLXCORE230 + KIT-ROCK2HL : UNDERGOUND GEARMOTOR 230V
HLXCORE230 230 V underground electromechanical gearmotor .
Ideal for swing gates up to 3 meters.
Equipped with encoder and easy release.
The KIT replaces the discontinued phase out ROCK motor.
Safe thanks to the precision and sensitivity of the encoder and to the slowdowns in opening and closing.
Practical thanks to the control unit with quick connection and self-learning receiver.
Adjustable limit switches integrated in the case.
Reliable with perfect watertightness and solid and robust mechanics.ROCK-230 -KIT-ROCK2HL + HLXCORE230 230V
HLXCORE230 230V underground electromechanical gearmotor for leaves up to 3 m.
Compatible with BOX ROCK foundation boxes or embedding ROCK CASE
using the adaptation kit : KIT-ROCK2HLHLXCORE230
ELECTROMECHANICAL OPERATOR HLXCORE230
– 230V MOTOR FOR GATES
– 110° MAXIMUM OPENING ANGLE
– GATE MAX 3M
– GATE MAX 550KG
230 V electromechanical underground gearmotor, for leafs up to 3 m.
It replaces the old model TELCOMA ROCK-230 V
Compatible with CAME EMBEDDING CASES
Compatible with old ROCK TELCOMA embedding cases with KIT-ROCK2HL adaptation kit€395,00 + TAXROCK 230 – HLXCORE230 + KIT-ROCK2HL
€395,00 + TAX -
SPW10
SPW 10 – SUPPLEMENTARY SOLAR PANEL KIT FOR SUN POWER
SPW10 –SUPPLEMENTARY SOLAR PANEL KIT FOR SUN POWER
SUPPLEMENTARY PHOTOVOLTAIC SOLAR PANEL KIT :
Two photovoltaic panels complete with adjustable brackets.
SPW10 Kit to increase the power capacity of SUNPOWER Power cupply system€168,00 + TAXSPW10
€168,00 + TAX -
SUNPOWER
SUN POWER – KIT SOLAR PANEL POWER SUPPLY
SUNPOWER – POWER SUPPLY KIT
SUN POWER Solar panels for use with all 24Vdc automation.
Two solar panels complete with adjustable brackets.
Watertight box with batteries, command electronics and charger.
This product uses solar energy to power automatic devices
for gates, garage doors, and road barriers etc. situated far
away from the mains power lines, all without needing any sort
of excavation or bric work. SUN POWER is compatible with
all the Cardin Trade control units for 24Vdc motors, making
them independent, reducing electricity costs and respecting
the environment.€301,00 + TAXSUNPOWER
€301,00 + TAX -
T124 CONTROL UNIT
T124 – CONTROL UNIT MOTORS 24V
T124 / T 124 – ELECTRONIC PROGRAMMER FOR ONE OR TWO 24V MOTORS
Control unit T124 for 1 motor 24 Vdc, with torque adjustment, slowing down and encoder
Encoder controlled programmer with torque limitation, deceleration,
inputs for safety edges in both the opening and closing directions,
safety device exclusion via dip-switch:
– second channel OC2 output (contact US1);
– connection for the keypad TAST3F;
– BSA and BSC inputs for 8K2 safety edges.€152,00 + TAXT124 CONTROL UNIT
€152,00 + TAX -
T224 CONTROL UNIT
T224 – CONTROL UNIT MOTORS 24V
T224 – CONTROL UNIT IN PHASE OUT
REPLACED BY THE : T624T224 / T 224 – ELECTRONIC PROGRAMMER FOR ONE OR TWO 24V MOTORS
Control unit T224 for 2 motors 24 Vdc, with torque adjustment, slowing down and encoder
Encoder controlled programmer with torque limitation, deceleration,
inputs for safety edges in both the opening and closing directions,
safety device exclusion via dip-switch:
– second channel OC2 output (contact US1);
– connection for the keypad TAST3F;
– BSA and BSC inputs for 8K2 safety edges.€199,00 + TAXT224 CONTROL UNIT
€199,00 + TAX -
T21B CONTROL UNIT
T 21B – ELECTRONIC CONTROL UNIT
T21B CONTROL UNIT – ELECTRONIC PROGRAMMER CONTROLLING ONE 230V MOTOR
T 21B for rolling grills or rolling shutters max. 1300W.
Supplied with a fitted RSQ504OC2 receiver card.
Protection grade IP55.
MAINS POWER SUPPLY 230Vac
MOTOR OUTPUT 230Vac
MOTOR POWER 1000W.
PROTECTION GRADE IP55
FIREPROOFING GRADE V2€70,00 + TAXT21B CONTROL UNIT
€70,00 + TAX -
T31 CONTROL UNIT
T 31 – ELECTRONIC CONTROL UNIT
T31 – ELECTRONIC CONTROL UNIT
Control unit for 1 roller shutter motor in 230 V.
Plug in receiver (optional).
T31 Control unit like T21, but with limit switch inputs,
motor force adjustment and courtesy light output.
MAINS POWER SUPPLY 230Vac
MOTOR OUTPUT 230Vac
MOTOR POWER 1000W.
PROTECTION GRADE IP55
FIREPROOFING GRADE V2