Equipment of the professional line
They are devices equipped with additional functions
-
BLTOW24M
BLTOW24M MASTER- ELECTROMECHANICAL GROUP WITH 24V MOTOR
BLTOW24M MOTOR IN PHASE OUT –
REPLACED WITH MOTORS : BLGRIFFE24M or BLGRIFFE24TMBLTOW24M MASTER – SELF-LOCKING GROUP WITH ENCODER 24V MAX. 200KG + NIMH BATTERIES(optional)
BLTOW24M MASTER Encoder-controlled self-locking Master unit for swing gate with hinged arms including:
– electronic programmer;
– 433MHz FM receiver;
– gate movement signalling via led (optional).
Kit battery charger + batteries to be ordered separately.
Particularly suited for installations with narrow columns that require
the mounting base to be less than 180mm in width and also for
gates where the hinges are not aligned to the edge of the column
and with gate leaves of up to 2 metres in length (2,5m with an
electric lock), 200kg maximum weight.
Manual release is carried out using a practical locking – unlocking
lever protected by a security key.
Operator arm included.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount -
BL824S
BL824S – ELECTROMECHANICAL GROUP WITH 24V MOTOR SLAVE
BL824S – MOTOR IS IN PHASE OUT
REPLASED WITH MOTOR : BLGRIFFE24SBL824S MOTOR – SELF-LOCKING GROUP SLAVE WITH ENCODER 24V MAX. 200KG
BL824S MOTOR SLAVE Encoder-controlled self-locking Master unit for swing gate including:
– electronic programmer;
– 433MHz FM receiver;
Particularly suited for installations with narrow columns that require
the mounting base to be less than 150mm in width and also for
gates where the hinges are not aligned to the edge of the column
and with gate leaves of up to 2 metres in length (2,5m with a hinged
arm and an electric lock) 200kg maximum weight.
Manual release is carried out using the hexagonal key located inside
the side panel.
Operator arm to be ordered separately.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount -
ROCK 24 – KIT-ROCK2HL + HLXCORE24
ROCK 24 : HLXCORE24 + KIT-ROCK2HL : UNDERGOUND GEARMOTOR 24V
ROCK – DISCONTINUED PHASE OUT MOTOR
REPLASED BY KIT : HLXCORE24 + KIT-ROCK2HLROCK HL2524ESB + KIT-ROCK2HL : UNDERGOUND GEARMOTOR 24V
HL2524ESB 24 V underground electromechanical gearmotor .
Ideal for swing gates up to 3 meters.
Equipped with encoder and easy release.
The KIT replaces the discontinued phase out ROCK motor.
Safe thanks to the precision and sensitivity of the encoder and to the slowdowns in opening and closing.
Practical thanks to the control unit with quick connection and self-learning receiver.
Adjustable limit switches integrated in the case.
Reliable with perfect watertightness and solid and robust mechanics.ROCK24 -KIT-ROCK2HL + HLXCORE24 24V
HLXCORE24 24V underground electromechanical gearmotor for leaves up to 3 m.
Compatible with BOX ROCK foundation boxes or embedding ROCK CASE
using the adaptation kit : KIT-ROCK2HL
-
ROCK 230 – KIT-ROCK2HL + HLXCORE230
ROCK230 : HLXCORE230 + KIT-ROCK2HL : UNDERGOUND GEARMOTOR 230V
ROCK 230 – DISCONTINUED PHASE OUT MOTOR
REPLASED BY KIT :ROCK230 HLXCORE230 + KIT-ROCK2HLROCK230 – HL251CL + KIT-ROCK2HL : UNDERGOUND GEARMOTOR 230V
HL251CL 230 V underground electromechanical gearmotor .
Ideal for swing gates up to 3 meters.
Equipped with encoder and easy release.
The KIT replaces the discontinued phase out ROCK motor.
Safe thanks to the precision and sensitivity of the encoder and to the slowdowns in opening and closing.
Practical thanks to the control unit with quick connection and self-learning receiver.
Adjustable limit switches integrated in the case.
Reliable with perfect watertightness and solid and robust mechanics.ROCK230 -KIT-ROCK2HL + HLXCORE230 230V
HLXCORE230 230V underground electromechanical gearmotor for leaves up to 3 m.
Compatible with BOX ROCK foundation boxes or embedding ROCK CASE
using the adaptation kit : KIT-ROCK2HL
-
CDR851R – PHOTOCELL
CDR851R – PHOTOCELL WITH SURFACE MOUNT CASE
IP55 RANGE 60MCDR851R PHOTOCELL – PHOTOELECTRIC OR PHOTOCELLS IN A SHOCKPROOF CASE IP55
Maximum range 15m – 60m
Power supply 12/24Vac-dc
Protection grade IP55
Transmitter and receiver housed in a waterproof plastic case.
Double-relay with serial exchange.
Sensitivity adjustment trimmer located on the receiver (only
CDR851).CDR851R PHOTOCELL – SURFACE-MOUNT PHOTOELECTRIC CELLS, RANGE MAX. 60m
Delayed version – 5s not adjustable
The kit contains a pair of surface-mount photoelectric cells, 2 lens
covers for surface-mount photocells and 2 fast-fitting wall brackets -
CDR893 – MINI PHOTOCELL
CDR893 / CDR 893 – MINI PHOTOCELL
WITH SURFACE MOUNT CASE IP55
CDR 893 / CDR893 PHOTOCELL – PHOTOELECTRIC OR PHOTOCELLS IN A SHOCKPROOF CASE IP55
CDR893 / CDR 893 SINGLE-RELAY PHOTOELECTRIC PHOTOCELLS
Power supply 10…24Vac-dc.
Range: 4m indoors – 2m outdoors.
Transmitter cable 3 metres – Receiver cable 3 metres.SINGLE-BEAM INFRARED BARRIER PHOTOELECTRIC PHOTOCELLS
with a socket for mounting on a rail guide DIN46277.
Overall dimensions 60 x 45 x 117.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount -
DKSTP – KIT TRANSPONDER + INTERFACE
DKSTP – KIT TRANSPONDER + INTERFACE
DKSTP – KIT DISCONTINUED IN PHASE OUT
REPLACED BY THE KIT: DKSTPMDKSTP – TRANSPONDER + INTERFACE KIT consists of two products:
DKSTPT – TRANSPONDER READER
DKS1000R – 4CH INTERFACEDKSTPT – TRANSPONDER READER
Surface-mounting IP57.
Using dip-switch settings it is possible to program the backlighting and other
operational parameters. It is suitable for connection with the DKS security system
via a shielded unipolar wire carrying both the power supply and the data line. Allows
the interface to be activated by proximity reading an S500 transmitter, a TAG or a
CARD. It is also fitted with auxiliary serial line allowing it to connect to the CARHF2
system (consult the Liberté catalogue).
DKS1000R – 4 CHANNEL INTERFACE
The interface box is easy to install and has the following features:
– power supply 12 or 24Vac-dc;
– 4 normally open relays (one for each channel);
– management of up to 3 peripheral devices (keypads and/or transponder readers;
– 1 multifunction key for the following functions: storing a code, cancelling a code,
cancelling the entire memory content, inserting an activation code for the “remote
memorisation” function. It is possible to store 1000 codes in memory with
a maximum of 6 digits for each code. Each code can activate up to 4 channels
(different functions).If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount -
SLX1524 MOTOR
SLX1524 / SLX 1524 – ELECTROMECHANICAL UNIT WITH A 24V MOTOR
SLX1524 AUTOMATION- FAST SELF-LOCKING UNIT ENCODER 24V MAX. 1500KG FOR SLIDING AUTOMATION
The SLX1524 motor for sliding automation gate is made up of a self-locking gear motor (with a gate
drag speed of 13 metres/minute) controlled by magnetic encoder with an in-built:
– electronic programmer;
– 433MHz FM receiver;The electronic programmer is factory fitted with a graphic LCD display
(128 x 128 pixels) with backlighting in six different languages.
The menu allows you to rapidly set the system parameters including:
the sequential button mode, automatic reclosing, warning lamp
pre-flashing, intermittent warning lamp activation, indicator light and
photoelectric cell function setting etc.The electronics card, thanks to the presence of the real-time clock,
allows you to set 10 events (shown on the display) and these events
permit you to regulate the opening and closing of the motor at
different times during the day within 3 weekly time bands (Mon-
Fri, Sat-Sun, Mon-Sun).If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount -
TXQ504C2
TXQ504C2 – 2-FUNCTION PRECODED TRANSMITTER (433MHz)
TXQ504C2 – QUARTZ TRANSMITTER DIGITAL REMOTE RADIO CONTROL WITH ROLLING CODES
2-function pre-coded remote control radio transmitter (433MHz)
TXQ504C2 – PRECODED TRANSMITTER – REMOTE RADIO CONTROL OR RADIO CONTROL
The TXQ504C2 transmitter container in shockproof plastic material.
3V lithium battery power supply CR2032.
Overall dimensions 35 x 80 x 11.
If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€23,00€28,00+ TAXTXQ504C2
€23,00€28,00+ TAX -
TXQ504C4
TXQ504C4 – 4-FUNCTION PRECODED TRANSMITTER (433MHz)
TXQ504C4 – QUARTZ DIGITAL REMOTE CONTROL WITH ROLLING CODES
4-function pre-coded remote control radio transmitter (433MHz)
TXQ504C4 – PRECODED TRANSMITTER – REMOTE CONTROL OR RADIO CONTROL
The TXQ504C4 transmitter container in shockproof plastic material.
3V lithium battery power supply CR2032.
Overall dimensions 35 x 80 x 11.
Radio system
433MHz – 868MHz FM ROLLING CODE
2128 CODE COMBINATIONS
REMOTE TRANSMITTER MEMORISATION
RFID: WIRELESS MEMORY
AERIAL ANS400 – ANQ800-1If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€25,00€30,00+ TAXTXQ504C4
€25,00€30,00+ TAX -
TXQ508C2
TXQ508C2 – 2-FUNCTION PRECODED TRANSMITTER (868MHz)
TXQ508C2 – QUARTZ DIGITAL REMOTE RADIO CONTROL TRANSMITTER WITH ROLLING CODES
2-function pre-coded remote control radio transmitter (868MHz)
TXQ508C2 – PRECODED TRANSMITTER – REMOTE CONTROL OR RADIO CONTROL
The TXQ508C2 transmitter container in shockproof plastic material.
3V lithium battery power supply CR2032.
Overall dimensions 35 x 80 x 11.
If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€29,00 + TAXTXQ508C2
€29,00 + TAX
