Automation accessories: columns, photocells, flashing selectors, safety accessories
-
CDR851T – PHOTOCELL
CDR851T – PHOTOCELL WITH SURFACE MOUNT CASE
IP55 RANGE 60MCDR851T PHOTOCELL – PHOTOELECTRIC OR PHOTOCELLS IN A SHOCKPROOF CASE IP55
Maximum range 15m – 60m
Power supply 12/24Vac-dc
Protection grade IP55
Transmitter and receiver housed in a waterproof plastic case.
Double-relay with serial exchange.
Sensitivity adjustment trimmer located on the receiver (only
CDR851).CDR851T PHOTOCELL – SURFACE-MOUNT PHOTOELECTRIC CELLS, RANGE MAX. 60m
Anti-tamper version.
The kit contains a pair of surface-mount photoelectric cells, 2 lens
covers for surface-mount photocells and 2 fast-fitting wall brackets€60,00 + TAXCDR851T – PHOTOCELL
€60,00 + TAX -
DKSTPMT – TRANSPONDER IN ZAMAK CASE
DKSTPMT – TRANSPONDER READER IN ZAMAK CASE
DKSTPMT – TRANSPONDER READER IN ZAMAK CASE
TRANSPONDER READER Surface-mounting IP57.
Using dip-switch settings it is possible to program the backlighting and other
operational parameters. It is suitable for connection with the DKS security system
via a shielded unipolar wire carrying both the power supply and the data line. Allows
the interface to be activated by proximity reading an S500 transmitter, a TAG or a
CARD. It is also fitted with auxiliary serial line allowing it to connect to the CARHF4G
system.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€57,00 + TAXDKSTPMT – TRANSPONDER IN ZAMAK CASE
€57,00 + TAX -
DKSTPT – TRANSPONDER
DKSTPT – TRANSPONDER READER
DKSTPT – TRANSPONDER READER IS IN PHASE OUT
REPLACED WITH : DKSTPMT -TRASPONDER READER IN ZAMAK CASEDKSTPT – TRANSPONDER READER
The DKSTPT transponder reader is Surface-mounting IP57.
Using dip-switch settings it is possible to program the backlighting and other
operational parameters. It is suitable for connection with the DKS security system
via a shielded unipolar wire carrying both the power supply and the data line. Allows
the interface to be activated by proximity reading an S500 transmitter, a TAG or a
CARD. It is also fitted with auxiliary serial line allowing it to connect to the CARHF2
system (consult the Liberté catalogue).€57,00 + TAXDKSTPT – TRANSPONDER
€57,00 + TAX -
CDR893 – MINI PHOTOCELL
CDR893 / CDR 893 – MINI PHOTOCELL
WITH SURFACE MOUNT CASE IP55
CDR 893 / CDR893 PHOTOCELL – PHOTOELECTRIC OR PHOTOCELLS IN A SHOCKPROOF CASE IP55
CDR893 / CDR 893 SINGLE-RELAY PHOTOELECTRIC PHOTOCELLS
Power supply 10…24Vac-dc.
Range: 4m indoors – 2m outdoors.
Transmitter cable 3 metres – Receiver cable 3 metres.SINGLE-BEAM INFRARED BARRIER PHOTOELECTRIC PHOTOCELLS
with a socket for mounting on a rail guide DIN46277.
Overall dimensions 60 x 45 x 117.€57,00 + TAXCDR893 – MINI PHOTOCELL
€57,00 + TAX -
CDR851 – PHOTOCELL
CDR851 – PHOTOCELL WITH SURFACE MOUNT CASE
IP55 RANGE 60MCDR851 PHOTOCELL – PHOTOELECTRIC OR PHOTOCELLS IN A SHOCKPROOF CASE IP55
Maximum range 15m – 60m
Power supply 12/24Vac-dc
Protection grade IP55
Transmitter and receiver housed in a waterproof plastic case.
Double-relay with serial exchange.
Sensitivity adjustment trimmer located on the receiver (only
CDR851).CDR851 PHOTOCELL – SURFACE-MOUNT PHOTOELECTRIC CELLS, RANGE MAX. 60m
The kit contains a pair of surface-mount photoelectric cells, 2 lens
covers for surface-mount photocells and 2 fast-fitting wall brackets€55,00 + TAXCDR851 – PHOTOCELL
€55,00 + TAX -
SRCRX8E / SRCRX4E- STATIONARY TRANSCEIVER UNIT
SRCRX8E / SRCRX4E / SRCRXE – BI-CHANNEL STATIONARY TRANSCEIVER UNIT INTERFACE 868MHz
SRCRX8E / SRCRX4E / SRCRXE – BI-CHANNEL STATIONARY TRANSCEIVER UNIT INTERFACE
FOR SENSITIVE EDGE PHOTOCELLS OR GENERAL DEVICES
SRCRX8E – BI-CHANNEL STATIONARY TRANSCEIVER UNIT INTERFACE 868MHz
SRCRX4E – BI-CHANNEL STATIONARY TRANSCEIVER UNIT INTERFACE 433MHz
Power supply 12/24Vac-dc.
Maximum radio signal range 20m.
8 safety devices – 2 safety outputs NC/8.2kΩ.
Shockproof case IP65.
ROLLING CODE FM RADIO system. transmission frequency: 868MHz or 433MHZ
Before ordering, choose the frequency you want to purchase: 433MHz or 868MHz
If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€54,00 + TAXSRCRX8E / SRCRX4E- STATIONARY TRANSCEIVER UNIT
€54,00 + TAX -
ICONX WARNING FLASHING LIGHT
ICONX – 24-230V LED FLASHING LIGHT WITH ANTENNA
ICONX – LED FLASHING LIGHT 24V – 230V WARNING LIGHT WITH ANTENNA
Special version with acoustic signal of the moving leaf e transparent cap
that allows the luminous visualization of the LEDs
RGB (orange, red, green, purple, white) with Cardin Pro control units.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€54,00 + TAXICONX WARNING FLASHING LIGHT
€54,00 + TAX -
SRCTX8E / SRCTX4E – SAFETY EDGE TRANSCEIVER INTERFACE
SRCTX8E / SRCTX4E / SRCTXE – SAFETY EDGE TRANSCEIVER INTERFACE 868MHz / 433MHz
SRCTX8E/ SRCTX4E / SRCTXE – SAFETY EDGE TRANSCEIVER INTERFACE FOR SENSITIVE EDGE
SRCTX8E – SAFETY EDGE TRANSCEIVER INTERFACE FOR SENSITIVE EDGE 868MHz
SRCTX4E – SAFETY EDGE TRANSCEIVER INTERFACE FOR SENSITIVE EDGE 433MHz
SAFETY EDGE TRANSCEIVER INTERFACE
Power supply 2 alkaline or lithium AA batteries.
Safety edge signal input NC/8.2kΩ.
Maximum radio signal range 20m.
Shockproof case IP65.
ROLLING CODE FM RADIO system. transmission frequency: 868MHz or 433MHz
Before ordering, choose the frequency you want to purchase: 433MHz or 868MHz
If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€53,00 + TAX -
SAFEPRC8 – SAFETY EDGE TRANSCEIVER INTERFACE
SAFEPRC8 – SAFETY EDGE TRANSCEIVER INTERFACE 868MHz
SAFEPRC8 – SAFETY EDGE TRANSCEIVER INTERFACE FOR SENSITIVE EDGE 433MHz
3V lithium battery power supply.
Safety edge signal input NC/8.2kΩ.
Maximum radio signal range 30m.
Shockproof case IP65.
ROLLING CODE FM RADIO system. transmission frequency: 868MHzIf you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€53,00 + TAXSAFEPRC8 – SAFETY EDGE TRANSCEIVER INTERFACE
€53,00 + TAX -
SAFEPRC4 – SAFETY EDGE TRANSCEIVER INTERFACE
SAFEPRC4 – SAFETY EDGE TRANSCEIVER INTERFACE 433MHz
SAFEPRC4 – SAFETY EDGE TRANSCEIVER INTERFACE FOR SENSITIVE EDGE 433MHz
3V lithium battery power supply.
Safety edge signal input NC/8.2kΩ.
Maximum radio signal range 30m.
Shockproof case IP65.
ROLLING CODE FM RADIO system. transmission frequency: 433MHzIf you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€53,00 + TAXSAFEPRC4 – SAFETY EDGE TRANSCEIVER INTERFACE
€53,00 + TAX -
CDR999 PHOTOCELL
CDR999 – PHOTOCELL WITH SURFACE MOUNT CASE
IP55 RANGE 10MCDR999 PHOTOCELL – PHOTOELECTRIC OR PHOTOCELLS IN A SHOCKPROOF CASE IP55
Maximum range 10m
Power supply 12/24Vac-dc
Protection grade IP55
Transmitter and receiver housed in waterproof cases.
Self locking adjustable lens which can be rotated horizontally
through plus or minus 90° and vertically through plus or minus 30°
with respect to the standard installation position.
It is possible to connect up to 3 pairs of photocells and synchronize
the transmission (multiplex system).
Double relays on the receiver with digital control increase the security
and safety level of the output part (the part that furnishes the at rest/
alarm signal). Jumper for selecting the output contact mode (potential
free or resistance 8, 2kΩ contacts).CDR999 PHOTOCELL – SURFACE-MOUNT PHOTOELECTRIC CELLS, RANGE MAX. 10m
€51,00 + TAXCDR999 PHOTOCELL
€51,00 + TAX