• DKSTP – KIT TRANSPONDER + INTERFACE

    DKSTP – KIT TRANSPONDER + INTERFACE

    DKSTP – KIT DISCONTINUED IN PHASE OUT
    REPLACED BY THE KIT: DKSTPM

    DKSTP       – TRANSPONDER + INTERFACE KIT consists of two products:
    DKSTPT     – TRANSPONDER READER
    DKS1000R – 4CH INTERFACE

    DKSTPT – TRANSPONDER READER
    Surface-mounting IP57.
    Using dip-switch settings it is possible to program the backlighting and other
    operational parameters. It is suitable for connection with the DKS security system
    via a shielded unipolar wire carrying both the power supply and the data line. Allows
    the interface to be activated by proximity reading an S500 transmitter, a TAG or a
    CARD. It is also fitted with auxiliary serial line allowing it to connect to the CARHF2
    system (consult the Liberté catalogue).
    DKS1000R – 4 CHANNEL INTERFACE
    The interface box is easy to install and has the following features:
    – power supply 12 or 24Vac-dc;
    – 4 normally open relays (one for each channel);
    – management of up to 3 peripheral devices (keypads and/or transponder readers;
    – 1 multifunction key for the following functions: storing a code, cancelling a code,
    cancelling the entire memory content, inserting an activation code for the “remote
    memorisation” function. It is possible to store 1000 codes in memory with
    a maximum of 6 digits for each code. Each code can activate up to 4 channels
    (different functions).

  • DKSTPM – KIT TRANSPONDER IN ZAMA + INTERFACE

    DKS1000T – KEYPAD WITH BACKLIGHTING

    DKS1000T – KEYPAD WITH BACKLIGHTING
    Surface-mounting IP57.
    The metal antitamper keyboard DKS1000T has 12 keys, 10 numerical (0-9), one
    confirm key (*) and one cancel key (#) by means of which it is possible to program
    the backlighting and other operational parameters. It is suitable for connection with
    the DKS security system via a shielded unipolar wire carrying both the power supply
    and the data line. It is also fitted with auxiliary serial line allowing it to connect to the
    CARHF2 system (consult the Liberté catalogue).

  • DKSTPMT – TRANSPONDER IN ZAMAK CASE

    DKSTPMT – TRANSPONDER READER IN ZAMAK CASE

    DKSTPMT – TRANSPONDER READER  IN ZAMAK CASE
    TRANSPONDER READER Surface-mounting IP57.
    Using dip-switch settings it is possible to program the backlighting and other
    operational parameters. It is suitable for connection with the DKS security system
    via a shielded unipolar wire carrying both the power supply and the data line. Allows
    the interface to be activated by proximity reading an S500 transmitter, a TAG or a
    CARD. It is also fitted with auxiliary serial line allowing it to connect to the CARHF4G
    system.

  • DKSTPT – TRANSPONDER

    DKSTPT – TRANSPONDER READER

    DKSTPT – TRANSPONDER READER IS IN PHASE OUT
    REPLACED WITH : DKSTPMT -TRASPONDER READER IN ZAMAK CASE

    DKSTPT – TRANSPONDER READER
    The DKSTPT transponder reader is Surface-mounting IP57.
    Using dip-switch settings it is possible to program the backlighting and other
    operational parameters. It is suitable for connection with the DKS security system
    via a shielded unipolar wire carrying both the power supply and the data line. Allows
    the interface to be activated by proximity reading an S500 transmitter, a TAG or a
    CARD. It is also fitted with auxiliary serial line allowing it to connect to the CARHF2
    system (consult the Liberté catalogue).

    DKSTPT – TRANSPONDER

    57,00 + TAX
  • EDGE2

    EDGE2 / EDGE 2 –  REMOTE CONTROLS  TRASMITTER 433,92 MHz

    EDGE2 / EDGE 2 –  REMOTE RADIO CONTROL  TRASMITTER 433,92 MHz
    EDGE 2E Portable transmitters 2 channels.
    2-channel portable versions with code transfer function between two remote controls.
    Black casing, bi-injection molded, with rubber top.
    To have the maximum sensitivity and make the radio control indestructible.
    Soft key ring supplied.

    Compatible with TANGO SLIM series receivers (Old series in face out)

    EDGE2

    24,00 + TAX
  • EDGE20

    EDGE20 / EDGE 20 –  REMOTE RADIO CONTROL TRASMITTER 433,92 MHz

    EDGE 20 REMOTE RADIO CONTROL 433,92 MHz
    The EDGE20 remote radio control combines the simplicity of the fixed code with an excellent radio range at 433.92 MHz.
    Multichannel remote control for fast and intuitive control of 20 functions of EDGE receivers.
    Innovative and refined container with a white LED display which, placed under the semi-transparent plastic.
    Displays the selected channel.
    In the center there is a rubberized keyboard with three function keys
    and two for channel up-down.

    Equipped with practical non-slip rubber pads.

    EDGE20

    72,00 + TAX
  • EDGE230R4

    EDGE230R4 / EDGE 230R4  RECEIVER 433,92 MHz

    EDGE230R4 / EDGE 230R4 RECEIVER
    The EDGE series combines the simplicity of the fixed code with an excellent radio range at 433.92 MHz.
    The refined design, sober and essential assures the maximum ergonomic comfort.
    Edge range combines the simplicity of the fixed code to an excellent transmission range.
    Special functions: self learning codes and possibility to copy codes
    directly between transmitters.

    EDGE 230R4 / EDGE230R4 RECEIVER
    EDGE 230 R4 external universal receiver 4 channels.
    230V power supply.
    Box protection : IP56.
    Receiver with 230 V power supply and four outputs with power contact (max 5 A 230 V) in switching and voltage free.
    Code self-learning, programmable outputs with 3 different modes and watertight box (IP56).

    Compatible with TANGO SLIM series remote control transmitters (Old series in face out)

    EDGE230R4

    89,00 + TAX
  • EDGE4

    EDGE4 / EDGE 4 –  REMOTE RADIO CONTROL TRASMITTER 433,92 MHz

    EDGE4 / EDGE 4 –  REMOTE RADIO CONTROL  TRASMITTER 433,92 MHz
    EDGE 4 Portable transmitters 4 channels.
    4-channel portable versions with code transfer function between two remote controls.
    Black casing, bi-injection molded, with rubber top.
    To have the maximum sensitivity and make the radio control indestructible.
    Soft key ring supplied.

    Compatible with TANGO SLIM series receivers (Old series in face out)

    EDGE4

    26,00 + TAX
  • EDGEOC2

    EDGEOC2 / EDGE OC2 RICEVENTE  A 433,92 MHz

    EDGEOC2  / EDGE OC2 RICEVENTE
    La serie EDGE unisce la semplicità  del codice fisso ad un’ottima portata radio a 433.92 MHz.
    Il raffinato design, sobrio ed essenziale, dei radiocomandi assicura il massimo comfort ergonomico.
    La gamma di radiocomandi  completata da riceventi con autoapprendimento del codice, memoria estraibile e uscite programmabili.

    EDGEOC2 RICEVENTE
    La serie EDGE unisce la semplicit  del codice fisso ad un’ottima portata radio a 433.92 MHz.
    Il raffinato design, sobrio ed essenziale, dei radiocomandi assicura il massimo comfort ergonomico.

    33,0037,00 + TAX

    EDGEOC2

    33,0037,00 + TAX
  • EDGER4P

    EDGER4P / EDGE R4P  RECEIVER 433,92 MHz

    EDGER4P / EDGE R4P RECEIVER
    The EDGE series combines the simplicity of the fixed code with an excellent radio range at 433.92 MHz.
    The refined design, sober and essential assures the maximum ergonomic comfort.
    Edge range combines the simplicity of the fixed code to an excellent transmission range.
    Special functions: self learning codes and possibility to copy codes
    directly between transmitters.

    EDGER4P

    88,00 + TAX
  • EDGERB2

    EDGERB2 / EDGE RB2  RECEIVER 433,92 MHz

    EDGERB2 / EDGE RB2 RECEIVER
    The EDGE series combines the simplicity of the fixed code with an excellent radio range at 433.92 MHz.
    The refined design, sober and essential assures the maximum ergonomic comfort.
    Edge range combines the simplicity of the fixed code to an excellent transmission range.
    Special functions: self learning codes and possibility to copy codes
    directly between transmitters.

    EDGE RB2 / EDGERB2 RECEIVER
    EDGE RB2 compact size universal receiver 12/24 V ac/dc power supply. 2 channels.
    Compatible with TANGO SLIM series remote control transmitters (Old series in face out)

    EDGERB2

    60,00 + TAX
  • EDGETAXI

    EDGETAXI / EDGE TAXI –  REMOTE RADIO CONTROL TRASMITTER 433,92 MHz

    EDGE TAXI REMOTE RADIO CONTROL 433,92 MHz
    EDGE TAXI 5 channels transmitter specially designed to be installed in the car.
    The code transmission is repeated cyclically and autonomously.
    Automatically repeats the radio signal improving convenience and safety for the driver.
    The EDGETAXI remote radio control combines the simplicity of the fixed code with an excellent radio range at 433.92 MHz.
    Same refined container as the multichannel EDGE20  but with dedicated software for use in the car.
    By briefly pressing one of the keys of the Taxi remote control.
    In this way we add convenience and safety for those who drive the car.
    A convenient self-adhesive fixing system is supplied to have the remote control always at hand.

    EDGETAXI

    57,00 + TAX

Main Menu