• ICON – WARNING FLASHING LIGHT

    ICON – 24-230V LED FLASHING LIGHT WITH ANTENNA

    ICON – LED FLASHING LIGHT 24V – 230V WARNING LIGHT WITH ANTENNA
    Multi-led warning flashing light with 433MHz antenna integrated in the circuit.
    The light system is placed inside a shockproof container made of opalescent polycarbonate
    that accentuates the realization
    of the luminous effect.
    Selectable power supply on terminal board: 24Vac-dc – 230Vac.
    Duty cycle 70%.
    Steady light/flashing light selection jumper.
    IP54 degree of protection.
    Comes with relative column/wall support.

  • ICONX WARNING FLASHING LIGHT

    LACOLED24-230  – FLASHING LIGHT LED 24V 230V

    LACO LED24-230 FLASHING LIGHT 24 V 230V
    LACOLED24-230 flashing light with built-in 433 MHz antenna.

    LACO series flashing light with antenna.
    Comes with its SUPLACO support.
    Flashing 24V power supply.

  • ILBINO SINCRO

     ILBINO SINCRO

    ILBINO SINCRO photocell
    Programmable infrared photocell.
    ILBINO SINCRO is ideal for complex systems with up to 8 pairs of photocells thanks to the new synchronism system.
    The power supply can be 24V alternating or direct, without polarity references.

    ILBINO SINCRO
    Pair of synchronized mini photocells.
    Range 25 m.

    ILBINO SINCRO

    36,00 + TAX
  • INTBTC4 BLUETOOTH INTERFACE

    INTBTC4 – BLUETOOTH INTERFACE IN BOX (12 / 24Vac-dc).

    INTBTC4 – BLUETOOTH INTERFACE WITH FOUR RELAYS
    The interface with a Bluetooth module allows the control of four relays
    with NO or NC contacts. The selection dip-switches (one block per
    relay) allow you to select the relay’s activation method: impulsive, ON/
    OFF, timer controlled or remotely controlled relay activation using the
    programming calender in the Cardin multiprotocol interface Cardin
    RCQ504/508W00. The programming buttons (one per relay) allow
    you to set the activation times for the relays (from 1 s to 5 min) for
    the timer controlled mode.
    The Bluetooth module MODBT is to be ordered separately.
    Power supply 12/24Vac-dc.
    Electrical input 50mA.
    Overall dimensions 95 x 75 x 25.
    Indoor box IP20

  • KT-BL ASY3

    KT-BL ASY3 – ELECTROMECHANICAL RAM 230V IRREVERSIBLE
    KT-BLASY3 – IS IN PHASE OUT
    KT-BLADE3 – ELECTROMECHANICAL RAM 230V IRREVERSIBLE NEW KIT REPLACING THE KT-BL EASY3

    KT-BLASY3 – ELECTROMECHANICAL RAM ASY3 WITH A 230V MOTOR 3M
    Self-locking encoder-controlled ram with mechanical travel limits. The
    geared motor locks the gate leaf in the closed position.
    Supplied with all the fittings necessary for mounting one ram including
    the front and rear brackets in galvanised steel.
    ECU to be ordered separately T600.

    BL ASY3
    Standard version elettromeccanical RAM 24V IRREVERSIBLE for gates max. length 3m,
    max. weight 250kg.

    KT-BLASY3 USING
    Standard version elettromeccanical RAM 24V IRREVERSIBLE for gates max. length 3m,
    max. weight 250kg.

    KT-BLASY3 KIT COMPLETE OF :

    2 BL ASY3 :  SELF-LOCKING ELECTROMECHANICAL RAMS
    with a 24V encoder-controlled motor and mechanical travel limits.

    TARGA-INT : INTERNATIONAL WARNING SIGN
    in PP, multi-language.

    ICON : LED WARNING LIGHT
    24V – 230V with an in-built aerial

    2 TXQ504C4 : 4-CHANNEL TRANSMITTERS
    433MHz FM ROLLING CODE.

    T624 : ELECTRONIC PROGRAMMER
    for two 24V encoder-controlled motors complete with speed regulation and
    deceleration.

    VEDO 180 : PAIR OF SURFACE-MOUNT PHOTOELECTRIC CELLS
    with adjustable lens, range 25m.

    RSQ504OC2 : 2-CHANNEL RECEIVER CARD
    433MHz open collector, slot-in card.
    S504 – S508 – S486 – FM – EDGE and NOIRE versions are available on request.

  • KT-BL TAG

    KT-BL TAG – 24VDC ELECTROMECHANICAL MOTOR FOR SWING GATES

    KT-BL TAG KIT COMPLETE ELETTROMECHANICAL 24V MOTOR FOR SWING GATES 2M 150KG
    These KIT electromechanical rams KT-BL TAG with 24Vdc motors suitable for small residential
    installations with two swing gate leaves or one pedestrian gate are easy to fit
    without requiring brickwork and offer excellent service with regard to the number
    of manoeuvres.

    KT-BL TAG USING
    Worm screw automation for gates with a maximum length of 2m, maximum
    weight 150kg.

    KT-BL TAG

    672,00 + TAX
  • KT-BL3924MCB

    KT BL3924MCB – COMPLETE KIT SERIES BL3924MCB 24V MOTOR

    KT BL3924MCB – COMPLETE KIT SERIES BL3924MCB – WITH ENCODER 24V MAX. 400KG AND 5M

    OPERENTING USE
    The KIT KT BL3924MCB is particularly suited for installations with large size columns where the hinges are not aligned to the edge of the column and with gate leaves of up to 5m with
    an electric lock, 400kg maximum weight.

    BL3924MCB : SELF-LOCKING MASTER UNIT
    with a 24V encoder-controlled motor, electronic programmer, 433MHz
    FM receiver, battery charger and NiMH batteries.
    BL3924S : SELF-LOCKING SLAVE UNIT
    driving the second gate.
    BL3924ARM : 2 STANDARD HINGED OPERATOR ARMS
    in spray-painted cast aluminium.
    TXQ504C4 :  2 4-CHANNEL TRANSMITTERS
    433MHz FM ROLLING CODE.
    CDR999 : PAIR OF PHOTOCELLS
    in class 3 with adjustable lens, range 10m.
    ICON : LED WARNING LIGHT
    24V – 230V with an in-built aerial.
    CABPC10 : 10-METRE WIRING CABLE
    with end sleeves.
    TARGA-INT : INTERNATIONAL WARNING SIGN
    in PP, multi-language.

    KT-BL3924MCB

    1.290,00 + TAX
  • KT-BL3924MCD

    KT BL3924MCD – COMPLETE KIT SERIES BL3924MCB 24V MOTOR

    KT BL3924MCD – COMPLETE KIT SERIES BL3924MCB – WITH ENCODER 24V
    SWING DOOR MAX.
    400KG AND 5M

    OPERENTING USE
    The KIT KT BL3924MCD with articulated arms is particularly suited for installations with large size columns where the hinges are not aligned to the edge of the column and with gate leaves of up to 5m with an electric lock, 400kg maximum weight.

    BL3924MCB : SELF-LOCKING MASTER UNIT
    with a 24V encoder-controlled motor, electronic programmer, 433MHz
    FM receiver, battery charger and NiMH batteries.
    BL3924S : SELF-LOCKING SLAVE UNIT
    driving the second gate.
    BL824DRM : 2 STRAIGHT ARMS WITH A SLIDING GUIDE
    in spray-painted cast aluminium.
    TXQ504C4 :  2 4-CHANNEL TRANSMITTERS
    433MHz FM ROLLING CODE.
    CDR999 : PAIR OF PHOTOCELLS
    in class 3 with adjustable lens, range 10m.
    ICON : LED WARNING LIGHT
    24V – 230V with an in-built aerial
    CABPC10 : 10-METRE WIRING CABLE
    with end sleeves.
    TARGA-INT : INTERNATIONAL WARNING SIGN
    in PP, multi-language.

    KT-BL3924MCD

    1.332,00 + TAX
  • KT-BL824ACB

    KT BL824ACB – COMPLETE KIT SERIES BL824ACB 24 MOTOR

    KT BL824ACB  – COMPLETE KIT SERIES BL824MCB – WITH ENCODER 24V
    SWING GATES MAX.
    200KG

    OPERATIONAL USE
    Particularly suited for installations with narrow columns that require the
    mounting base to be less than 150mm in width and also for gates where the
    hinges are not aligned to the edge of the column and with gate leaves of up
    to 2 metres in length (2,5m with an electric lock) 200kg maximum weight.
    BL824MCB : SELF-LOCKING MASTER UNIT
    with a 24V encoder-controlled motor, electronic programmer, 433MHz
    FM receiver, battery charger and NiMH batteries.
    BL824S : SELF-LOCKING SLAVE UNIT
    driving the second swing gates.
    BL824ARM : 2 STANDARD HINGED OPERATOR ARMS
    in spray-painted cast aluminium.
    TXQ504C4 : 2 4-CHANNEL TRANSMITTERS
    433MHz FM ROLLING CODE.
    CDR999 : PAIR OF PHOTOCELLS
    in class 3 with adjustable lens, range 10m.
    ICON : LED WARNING LIGHT
    24V – 230V with an in-built aerial
    CABPC10 : 10-METRE WIRING CABLE
    with end sleeves.
    TARGA-INT :INTERNATIONAL WARNING SIGN
    in PP, multi-language.

    KT-BL824ACB

    1.158,00 + TAX
  • KT-BL824DCB

    KT BL824DCB – COMPLETE KIT SERIES BL824ACB 24 MOTOR

    KT BL824DCB  – COMPLETE KIT SERIES BL824MCB – WITH ENCODER 24V MAX. 200KG

    OPERATIONAL USE
    Particularly suited for installations with narrow columns that require the
    mounting base to be less than 150mm in width and also for gates where the
    hinges are not aligned to the edge of the column and with gate leaves of up
    to 2 metres in length (2,5m with an electric lock) 200kg maximum weight.

    BL824MCB : SELF-LOCKING MASTER UNIT
    with a 24V encoder-controlled motor, electronic programmer, 433MHz
    FM receiver, battery charger and NiMH batteries.
    BL824S : SELF-LOCKING SLAVE UNIT
    driving the second gate.
    BL824DRM : 2 STRAIGHT ARMS WITH A SLIDING GUIDE
    in spray-painted cast aluminium.
    TXQ504C4 : 2 4-CHANNEL TRANSMITTERS
    433MHz FM ROLLING CODE.
    CDR999 : PAIR OF PHOTOCELLS
    in class 3 with adjustable lens, range 10m.
    ICON : LED WARNING LIGHT
    24V – 230V with an in-built aerial
    CABPC10 : 10-METRE WIRING CABLE
    with end sleeves.
    TARGA-INT :INTERNATIONAL WARNING SIGN
    in PP, multi-language.

    KT-BL824DCB

    1.197,00 + TAX
  • KT-BLADE3

    KT-BLADE3  KIT – COMPLETE KIT BLADE3 SERIES WITH 230V ELECTROMECHANICAL RAM

    KT BLADE3  KIT – IRREVERSIBLE SELF-LOCKING WITH ENCODER 230V MAX WEIGHT. 250KG 3M

    BLAD3 : 2 SELF-LOCKING ELECTROMECHANICAL RAMS
    with a 230V encoder-controlled motor and mechanical travel limits.
    ICON : LED WARNING LIGHT
    24V – 230V with an in-built aerial
    TXQ504C4 : 2 4-CHANNEL TRANSMITTERS
    433MHz FM ROLLING CODE.
    T600 : ELECTRONIC PROGRAMMER
    For two 230V encoder-controlled motors complete with speed regulation
    and deceleration.
    VEDO 180 : PAIR OF SURFACE-MOUNT PHOTOELECTRIC CELLS
    with adjustable lens, range 25m.
    RSQ504OC2 : 2-CHANNEL RECEIVER CARD
    433MHz open collector, slot-in card.
    S504 – S508 – S486 – FM – EDGE and NOIRE versions are available on request.
    TARGA-INT : INTERNATIONAL WARNING SIGN
    in PP, multi-language.

    Reversible BLADE3 encoder-controlled ram with mechanical travel limits.
    An electric lock must be fitted to guarantee that the gate leaf locks in the
    closed position.
    Supplied with all the fittings necessary for mounting one ram including
    the front and rear brackets.
    Cardin ECU to be ordered separately T00.
    Long version for gates max. length 5m, max. weight 300kg.

    KT-BLADE3

    865,00 + TAX
  • KT-BLADE324

    KT-BLADE324  KIT – COMPLETE KIT BLADE324 SERIES WITH 24V ELECTROMECHANICAL RAM

    KT-BLADE324  KIT- IRREVERSIBLE SELF-LOCKING WITH ENCODER 24V MAX WEIGHT. 250KG 3M

    BLAD324 : 2 SELF-LOCKING ELECTROMECHANICAL RAMS
    with a 24V encoder-controlled motor kit and mechanical travel limits for swing gates.
    ICON : LED WARNING LIGHT
    24V – 230V with an in-built aerial
    TXQ504C4 : 2 4-CHANNEL TRANSMITTERS
    433MHz FM ROLLING CODE.
    T624 : ELECTRONIC PROGRAMMER
    For two 24V encoder-controlled motors complete with speed regulation
    and deceleration.
    VEDO 180 : PAIR OF SURFACE-MOUNT PHOTOELECTRIC CELLS
    with adjustable lens, range 25m.
    RSQ504OC2 : 2-CHANNEL RECEIVER CARD
    433MHz open collector, slot-in card.
    S504 – S508 – S486 – FM – EDGE and NOIRE versions are available on request
    TARGA-INT : INTERNATIONAL WARNING SIGN
    in PP, multi-language.

    Reversible BLADE324 encoder-controlled ram with mechanical travel limits.
    An electric lock must be fitted to guarantee that the gate leaf locks in the
    closed position.
    Supplied with all the fittings necessary for mounting one ram including
    the front and rear brackets.
    Cardin ECU to be ordered separately T624.
    Long version for gates max. length 3m, max. weight 300kg.

    KT-BLADE324

    865,00 + TAX

Main Menu