GL STAR2AE

314,00 with tax

In stock

GL STAR 2AE /GL STAR2AE  - SLAVE SELF-LOCKING SWINGING GARAGE DOOR MOTOR 230V

GL STAR 2AE / GL STAR2AE - EELECTROMECHANICAL ACTUATOR FOR OVERHEAD GARAGE DOORS 230V
Electromechanical gearmotor 230 V ideal for overhead doors up to 8 m2.
Safe and Precise thanks to the encoder and the slowing down in opening and closing.
Practical thanks to the control unit with plug-in receiver and self-learning function.
LED courtesy light.
Versatile, with a wide choice of accessories for any installation need.

GLSTAR 2AE /GL STAR2AE SELF-LOCKING GARAGE DOOR MOTOR
with a 230V slave motor for garage doors 2,5 m and 8 m2 .

Compare
SKU: CA-GLSTAR2AE Categories: , , ,

GL STAR 2AE /GL STAR2AE  – SLAVE SELF-LOCKING SWINGING GARAGE DOOR MOTOR 230V

GL STAR 2AE / GL STAR2AE – EELECTROMECHANICAL ACTUATOR FOR OVERHEAD GARAGE DOORS 230V
Electromechanical gearmotor 230 V ideal for overhead doors up to 8 m2.
Safe and Precise thanks to the encoder and the slowing down in opening and closing.
Practical thanks to the control unit with plug-in receiver and self-learning function.
LED courtesy light.
Versatile, with a wide choice of accessories for any installation need.

GLSTAR 2AE /GL STAR2AE SELF-LOCKING GARAGE DOOR MOTOR
with a 230V slave motor for garage doors 2,5 m and 8 m2 .

GARAGE AUTOMATION FOR COUNTERBALANCED DOORS CARDIN TRADE SERIES GL STAR

230V automatic device suitable for counterbalanced garage doors up to 10 m2.
For garage doors larger than 4 metres and for garage doors with an in-built
pedestrian door (mounted laterally) a second slave motor is required.

GL STAR2AE is a complete automation system suitable for use with all types of
counterbalanced overhead garage doors.
The appliance has been designed and realised to be reliable day after day and throughout the passage of time.
It is for this reason that the panelling and external particulars are made out of cast
aluminium and galvanised steel, the internal moving parts are made of tempered
steel and the carter is made of shockproof plastic.

These solutions offer guaranteed resistance to atmospheric agents, and after
installing, an absolutely maintenance free future.
The installer is guaranteed a valid and reliable product.
The user is guaranteed first rate service and a silent,
consistent and regular action which will safeguard the automated structure
throughout the years of service to come.

The manual release system allows the manoeuvre to be fluid and manageable under
all working conditions whilst at the same time covering all possible manual release
mechanisms installed by the door manufacturers whether it be a handle fitted directly
to the door or an external cord release system.

GL STAR2AE Control Unit

The integrated programmer allows encoder and limit switch controlled gate
positioning and self-programming thus reducing installation times to a minimum
and optimising the programming procedure.
The electronic control unit controls are completed by the anti-crush and “soft start”
and “soft stop” functions.

Open collector:
The product range is factory set for the insertion of an open collector receiver
card that guarantees compatibility with all the radio control series available in the
Cardin catalogue.

TECHNICAL SPECIFICATIONS GL STAR2AE
Motor power supply                                               230V
Max. motor current                                                1,7 A
Motor power                                                          360 W
Max. torque                                                           400 Nm
Max. door surface                                                  8 m2
Opening time                                                         20 sec
Work cycles                                                           40%
Capacitor                                                              10 μF
Encoder optional                                                    YES
Limit switches                                                        optional
Grease lubricant                                                    TS10

TECHNICAL SPECIFICATIONS BUILT IN Control unit GL STAR2AE
Model                                                                              S101
Power supply                                                                    230 V
Max. current                                                                     6,3 A
Electronic slow down                                                          YES
Compatible with Sun Power                                                NO

ACCESSORIES GL STAR2AE

S101B : ELECTRONIC PROGRAMMER OR CONTROL UNIT
for one 230V encoder-controlled motor complete with torque limitation
and deceleration. Factory set for the insertion of an open collector receiver
card.

OC2 RECEIVER CARD
The product range is factory set for the insertion of an open collector receiver card that guarantees
compatibility with all the radio control series available in the Cardin catalogue.

SUPPORT BRACKETS
SS60STARA  :in zinc-plated metal, 60cm.
SS200STARA : in zinc-plated metal, 200cm.

TRANSMISSION SHAFTS
AT20   : 20cm including support bracket.
AT150  : 150cm including support bracket.
AT200 : 200cm including support bracket.

TRANSMISSION ARMS
BDB     : Two straight arms with round bushing for AT shafts.
BDBUS :  One straight arm with grooved bushing for motor drive shaft.
BCB      : Two curved arms with round bushing for AT shafts.

SRSTAR : ADJUSTABLE BRACKETS
Axle shaft supports.

FCGL STAR2AE : TRAVEL LIMIT KIT
Travel limit switch kit and encoder for GL STAR2AE.

KSE : EXTERNAL RELEASE CORD KIT
to connect to the door handle.

KSN  : EXTERNAL RELEASE CORD KIT
with a personalised key for counterbalanced or sectional garage doors.

GLJSTAP : ADAPTER KIT GL20-GLSTAR
Adapter kit to instal the STAR garage door motor in an old GL20
installation

Additional information

Weight 10 kg
Dimensions 1.00 × 0.40 × 0.40 m
Be the first to review “GL STAR2AE”

Your email address will not be published.

Reviews

There are no reviews yet.

See It Styled On Instagram

    No access token

Main Menu