BLi1000 INSIDE

330,00 with tax

In stock

BLi1000 INSIDE- SELF-LOCKING ACTUATOR INSIDE 24v

BLi1000 INSIDE  -  INSIDE MOTOR SELF-LOCKING GROUP WITH ENCODER 24V MAX. 200KG

INTEGRABLE ELECTROMECHANICAL ACTUATOR:
- 24V MOTOR
- FOR GATES MAX 200Kg
- DOOR LENGTH 2,5M
- WITH MAX OPENING. 180 °
Self-locking actuator controlled by encoder.
INSIDE motor: Can be integrated into swing gates

The automation KT-BLi1000 inside motor is encoder controlled by an external ECU factory fitted
with a graphic LCD display (128 x 128 pixels) with backlighting in six
different languages. The geared motors are connected to the electronics
card by means of a six-wire, fast-fitting cable.

CC242EFAMCB : ELECTRONIC PROGRAMMER FOR TWO MOTORS
including:
- 433MHz FM receiver;
- multi-decoding module S449-S486-S504-S508;
- battery charger and NiMH batteries.

Compare
SKU: CA-BLi1000 Categories: , , , ,

BLi1000 INSIDE- SELF-LOCKING ACTUATOR INSIDE 24v

BLi1000 INSIDE  –  INSIDE MOTOR SELF-LOCKING GROUP WITH ENCODER 24V MAX. 200KG

INTEGRABLE ELECTROMECHANICAL ACTUATOR FOR SWING GATE:
– 24V MOTOR
– FOR GATES MAX 200Kg
– DOOR LENGTH 2,5M
– WITH MAX OPENING. 180 °
Self-locking actuator controlled by encoder.
INSIDE motor: Can be integrated into swing gates

The automation BLi1000 inside motor for swing gate is encoder controlled by an external ECU factory fitted
with a graphic LCD display (128 x 128 pixels) with backlighting in six
different languages. The geared motors are connected to the electronics
card by means of a six-wire, fast-fitting cable.

CC242EFAMCB : ELECTRONIC PROGRAMMER FOR TWO MOTORS
including:
– 433MHz FM receiver;
– multi-decoding module S449-S486-S504-S508;
– battery charger and NiMH batteries.

BLi1000 – INSIDE SELF-LOCKING GROUP WITH ENCODER 24V

Cardin inside motor identifies a line of products dedicated to the manufacturers of mass
produced industrial swing gates and doors.

The Cardin inside devices are designed to be easily integrated into specially made
structures. Integrating the automation device into the structure of the gate or door
allows you to complete the automatic door while still in the factory, thus allowing
the manufacturer to supply a complete product that has already been tested and
complies with the machine directive.

This inside motorfor swing gate has been created to be integrated into the structure of specially made
hinged gates, either into the gate’s upright (direct transmission) or into the gate
support column (transmission to the gate leaf via a pinion or pulley).
The geared motor is self-locking and is fitted with a direct action hexagonal Allen
key system.

The geared motor components are enclosed in a robust structure in spray-painted
pressed aluminium with a high performance, robust, permanently lubricated twostage
epicycloid reduction unit connected to an efficient low voltage motor that
allows silent running.

The operator is suitable for driving hinged gates up to 2,0 m in length and 200kg
in weight per gate leaf. For gates longer than 2,5m an electric lock must be fitted.

The geared motor is made self-locking (on both gate leaves) by the use on an
integrated electromagnetic lock which blocks the gate in the closed position.

ELECTRONIC PROGRAMMER – CONTROL UNIT FOR TWO MOTORS

including:
– 433MHz FM receiver;
– multi-decoding module S449-S486-S504-S508;
– battery charger and NiMH batteries.
The electronic programmer is factory fitted with a graphic LCD
display (128 x 128 pixels) with backlighting in six different
languages.

The menu allows you to counts and display the number
of manoeuvres carried out by the machine and to rapidly set the
system parameters.
The electronics card, thanks to the presence
of the real-time clock, allows you to set 10 events (shown on the
display).
The events can be enabled or disabled (during holiday
periods) either from the menu or by means of a radio channel.

The electronic components are housed in a shockproof plastic container
IP55 and the appliance is factory fitted with a multi-decoding module
(system S449 – S486 – S504 – S508), a battery charger and NiMH
batteries which allow the gate to be manoeuvred even during blackouts.
Compatible with the INTPRG-3G/WF system that allows the monitoring
and programming of system parameters from remote positions.

MOTOR SPECIFICATIONS BLi1000

Motor power supply                                     Vdc           24
Nominal electrical input                              A               2
Power input                                                W              50
Duty cycle                                                   %              70
Opening time     90°                                     s               16
Max opening angle                                        °               180
Maximum gate weight                                  kg             200
Maximum gate length                                  m              2
Operating temperature range                        °C             -20°…+55
Protection grade                                          IP             55

PROGRAMMER SPECIFICATIONS

Power supply                             Vac 230
Nominal electrical input              A 1,2
Maximum power yield                 W 250
Power output for 1 or 2 motors    W 60 + 60

BUILT-IN RECEIVER CARD

Reception frequency MHz 433.92 / 868,3
Channels numbers No 4
Functions numbers No 8
Number of stored codes No 300 / 1000

ACCESSORIES KT-BLi1000 INSIDE

CC242EFAMCB : ELECTRONIC PROGRAMMER FOR TWO MOTORS
Version with a battery charger and batteries.

CC24EFAM : ELECTRONIC PROGRAMMER FOR TWO MOTORS
Version without a battery charger and batteries.

KBNIMH-1 : KIT BATTERY CHARGER + NIMH BATTERIES
Allows the programmer CC242EFAM to work during blackouts.

CABPC100ST : 6-WIRE SPECIAL CONNECTING CABLE
100m (supplied on a special spool).

Additional information

Weight 15 kg
Dimensions 0.50 × 0.40 × 0.40 m
Be the first to review “BLi1000 INSIDE”

Your email address will not be published.

Reviews

There are no reviews yet.

See It Styled On Instagram

    No access token

Main Menu