-
BLADE5
BLADE5 – REVERSIBLE ELECTROMECHANICAL RAM WITH 230V MOTOR
BLADE5 MOTOR – REVERSIBLE SELF-LOCKING WITH ENCODER 230V MAX WEIGHT. 300KG 5M
Reversible BLADE5 encoder-controlled ram actuators with mechanical travel limits for 5m swing gate.
An electric lock must be fitted to guarantee that the gate leaf locks in the
closed position.
Supplied with all the fittings necessary for mounting one ram including
the front and rear brackets.
Cardin ECU to be ordered separately T624.
Long version for gates max. length 5m, max. weight 300kg.BLADE5 MOTOR USE
Reversible electromechanical piston.
Worm screw automation for leaves max.
Length 5m, weight max. 300kg.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€300,00 + TAXBLADE5
€300,00 + TAX -
CRL360DE DUBLE MOTOR FOR ROLLING SHUTTERS
CRL360DE / CRL 360DE– REVERSIBLE GEARED MOTOR FOR ROLLING SHUTTERS
CRL360DE / CRL 360DE SHUTTERS – DUBLE SELF-LOCKING GEARED MOTOR FOR ROLLING SHUTTER AND GARAGE DOORS
Two 230V geared motors permitting a maximum lifting power of 360kg.
Precise and reliable, thanks to the integrated travel limits and
standard electromagnetic lock, this model may fitted to all types of
rolling shutter with a 76mm drive shaft diameter and a crown wheel
diameter of 240mm.
Maximum rolling shutter height 6m.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€299,00 + TAXCRL360DE DUBLE MOTOR FOR ROLLING SHUTTERS
€299,00 + TAX -
GLMECHA24S MOTOR
GLMECHA24M / GLMECHA 24M – MASTER SELF-LOCKING SWINGING GARAGE DOOR MOTOR 24V
GLMECHA24M / GLMECHA 24M – EELECTROMECHANICAL ACTUATOR FOR OVERHEAD GARAGE DOORS 24V
Electromechanical gearmotor 24V ideal for overhead doors up to 8 m2.
Safe and Precise thanks to the encoder and the slowing down in opening and closing.
Practical thanks to the control unit with plug-in receiver and self-learning function.
LED courtesy light.
Versatile, with a wide choice of accessories for any installation need.GLMECHA24M / GLMECHA 24M – SELF-LOCKING GARAGE DOOR MOTOR
SELF-PROGRAMMING ELECTROMECHANICAL UNIT WITH A 24V MOTOR (433MHz)
Self-locking encoder-controlled Master automation with an in-built
electronic programmer.
Operator arms are to be ordered separately.
Kit battery charger + batteries to be ordered separately.
with a 230V slave motor for garage doors 2,5 m and 8 m2 .If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€295,00 + TAXGLMECHA24S MOTOR
€295,00 + TAX -
GLMECHA230S MOTOR
GLMECHA230S / GLMECHA 230S – SLAVE SELF-LOCKING SWINGING GARAGE DOOR MOTOR 230V
GLMECHA230S / GLMECHA 230S – EELECTROMECHANICAL ACTUATOR MOTOR FOR OVERHEAD GARAGE DOORS 230V
Electromechanical gearmotor 230V ideal for overhead doors up to 8 m2.
Safe and Precise thanks to the encoder and the slowing down in opening and closing.
Practical thanks to the control unit with plug-in receiver and self-learning function.
LED courtesy light.
Versatile, with a wide choice of accessories for any installation need.GLMECHA230S / GLMECHA 230S – SLAVE SELF-LOCKING GARAGE DOOR MOTOR
ELECTROMECHANICAL UNIT WITH A 230V MOTOR
Self-locking slave automation.
Use to supplement the GLMECHA230M units for particular
installations that require two motors.
Operator arm to be ordered separately.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€295,00 + TAXGLMECHA230S MOTOR
€295,00 + TAX -
BLADE3
BLADE3 MOTOR – REVERSIBLE ELECTROMECHANICAL RAM WITH 230V MOTOR
BLADE3 MOTOR – REVERSIBLE SELF-LOCKING WITH ENCODER 230V MAX WEIGHT. 250KG 3M
Reversible BLADE3 motor 230V encoder-controlled ram with mechanical travel limits for swing gates.
An electric lock must be fitted to guarantee that the gate leaf locks in the
closed position.
Supplied with all the fittings necessary for mounting one ram including
the front and rear brackets.
Cardin ECU to be ordered separately T600.
Long version for gates max. length 3m, max. weight 250kg.BLADE3 MOTOR USE
Reversible electromechanical piston.
Worm screw automation for leaves max.
Length 3m, weight max. 250kg.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€290,00 + TAXBLADE3
€290,00 + TAX -
BLADE324
BLADE324 – IRREVERSIBLE ELECTROMECHANICAL RAM WITH 24V MOTOR
BLADE324 MOTOR – IRREVERSIBLE SELF-LOCKING WITH ENCODER SWING GATEs 24V MAX WEIGHT. 300KG 3M
Reversible BLADE324 swing gate 24vencoder-controlled ram with mechanical travel limits.
An electric lock must be fitted to guarantee that the gate leaf locks in the
closed position.
Supplied with all the fittings necessary for mounting one ram including
the front and rear brackets.
Cardin ECU to be ordered separately T624.
Long version for gates max. length 3m, max. weight 300kg.BLADE324 MOTOR USE
Irreversible electromechanical piston.
Worm screw automation for leaves max.
Length 3m, weight max. 300kg.€290,00 + TAXBLADE324
€290,00 + TAX -
ACE FAST
ACE FAST / ACEFAST : GEARMOTORS FOR SLIDING GATES 24V
ACE FAST / ACEFAST : GEARMOTORS FOR SLIDING GATES 24V 300Kg
Electromechanical gearmotor in grease lubrication.
Ideal for industrial sliding gates up to 300 Kg.
Complete with encoder, magnetic limits and built built-in control unit.
Safe and Precise thanks to the encoder and the slowing down in opening and closing.
Practical thanks to the control unit with plug-in receiver and self-learning function.
Versatile fixing plate with adjustable height and depth.
Reliable with a sturdy aluminum base treated against oxidation and all moving parts in oilbath.
Constant performance over time and in any condition thanks to reduced wear&tear
and the possibility to maintain the oil at the ideal temperature using HOT (optional).
Manual release with coded lock.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€282,00 + TAXACE FAST
€282,00 + TAX -
SLACEFAST
SLACEFAST – IRREVERSIBLE GEARMOTOR 24V FOR SLIDING GATES 300Kg
SLACEFAST / ACE FAST -GEARMOTOR 24V FOR SLIDING GATES UP TO 300Kg
Electromechanical gearmotor ideal for residential sliding gates.
Complete with encoder, magnetic limits and advanced built-in control unit.The automation SLACEFAST 24V is made up of self-locking gear motor controlled by
encoder and magnetic travel limits with an in-built:
– electronic programmer;
– motor speed regulation;
– motor drive power regulation;
– slot-in open collector receiver card.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€282,00 + TAXSLACEFAST
€282,00 + TAX -
STAR1E
STAR 1E /STAR1E – EELECTROMECHANICAL ACTUATOR FOR OVERHEAD DOORS
STAR 1E / STAR1E – EELECTROMECHANICAL ACTUATOR FOR OVERHEAD DOORS
STAR1E Electromechanical gearmotor 230 V ideal for garage counterbalanced door up to 8 m2.
Safe and Precise thanks to the encoder and the slowing down in opening and closing.
Practical thanks to the control unit with plug-in receiver and self-learning function.
LED courtesy light.
Versatile, with a wide choice of accessories for any installation need
STAR1E
230 V STAR1E irreversible electromechanical gearmotor for garage counterbalanced door.
Without control unit.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€276,00 + TAXSTAR1E
€276,00 + TAX -
PRG3840CE
PRG3840CE – INDUSTRIAL PROGRAMMER CONTROLLING ONE THREE PHASE MOTOR
PRG3840CE – CONTROL UNIT IN PHASE OUT
REPLACED BY PRG400TEPRG3840CE – INDUSTRIAL PROGRAMMER OR CONTROL UNIT CONTROLLING ONE THREE PHASE MOTOR 400V.
– 2200W three phase power supply 400V.
Automatic, semiautomatic, manual and remote control functions.
Command inputs TA, TB, TC, TD, TAL.
Incorporated door security switch.
Optional external control buttons.
Electric brake output.
Interface for a standard slot-in radio receiver card.
The control unit is supplied with 4 x Ø16mm cable glands.
The PRG3840CE control unit is Suitable for the control of industrial gates and doors with one three
phase motor.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount -
BLGRIFFE24S MOTOR
BLGRIFFE24S SLAVE – ELECTROMECHANICAL GROUP WITH 24V MOTOR
BLGRIFFE24S SLAVE– SELF-LOCKING GROUP MOTOR WITH ENCODER 24V MAX. 200KG + NIMH BATTERIES(optional)
BLGRIFFE24S SLAVE Encoder-controlled self-locking Motor unit for swing gate with hinged arms including:– Operator hinged arm included.
– Kit battery charger + batteries to be ordered separately.USING IN
Particularly suited for installations with narrow columns that require
the mounting base to be less than 180mm in width and also for swing
gates where the hinges are not aligned to the edge of the column
and with gate leaves of up to 2 metres in length (2,5m with an
electric lock), 200kg maximum weight.
Manual release is carried out using a practical locking – unlocking
lever protected by a security key.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€265,00 + TAXBLGRIFFE24S MOTOR
€265,00 + TAX -
CC242ETOP
CC242ETOP – GRAPHIC DISPLAY CONTROL UNIT FOR 1 OR 2 24V MOTORS
CC242ETOP – ELECTRONIC CONTROL UNIT PROGRAMMERS FOR THE MANAGEMENT
OF ONE OR TWO ENCODER-CONTROLLED MOTORSElectronic CC242ETOP control unit programmer for encoder-controlled 24Vdc motors that allow
the precise position control of hinged and sliding gates fitted with a
multi-decoding module S449 – S486 – S504 – S508.
Batteries and battery charger in the CC242ETOPCB and
CC242EXTOPCB versions.The electronic CC242ETOP control unit programmer is factory fitted with a graphic LCD display
(128 x 128 pixels) with backlighting in six different languages.
The menu allows you to read the number of manoeuvres carried out
and to rapidly set the system parameters including: the sequential button
mode, automatic reclosing, warning lamp pre-flashing, intermittent
warning lamp activation, indicator light, photoelectric cell function setting
and electric lock enable etc.If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount€252,00 + TAXCC242ETOP
€252,00 + TAX