GLMECHA230S MOTOR

GLMECHA230S / GLMECHA 230S – SLAVE SELF-LOCKING SWINGING GARAGE DOOR MOTOR 230V

GLMECHA230S / GLMECHA 230S – EELECTROMECHANICAL ACTUATOR MOTOR FOR OVERHEAD GARAGE DOORS 230V
Electromechanical gearmotor 230V ideal for overhead doors up to 8 m².
Safe and Precise thanks to the encoder and the slowing down in opening and closing.
Practical thanks to the control unit with plug-in receiver and self-learning function.
LED courtesy light.
Versatile, with a wide choice of accessories for any installation need.

GLMECHA230S / GLMECHA 230S –  SLAVE SELF-LOCKING GARAGE DOOR MOTOR
ELECTROMECHANICAL UNIT WITH A 230V MOTOR
Self-locking slave automation.
Use to supplement the GLMECHA230M units for particular
installations that require two motors.
Operator arm to be ordered separately.

GLMECHA230S – GARAGE AUTOMATION FOR COUNTERBALANCED DOORS CARDIN SERIES GLMECHA

GLMECHA230S is a complete automatic device suitable for moving all types of counterbalanced garage doors.
The compact and solid form makes this product a versatile machine that may be
used safely and efficiently on all types of counterbalanced garage doors.
The automation consists of a compact single-piece geared reduction unit (with an
incorporated encoder and bilateral manual release system) and is fitted with a
reduction system made from materials that allow maximum efficiency and minimum noise.
All the components making up the device: geared motor,
transformer, electronic programmer and batteries (optional) are mounted
on a robust chassis made of shockproof plastic and are separated and
protected by a double carter that completely covers all the moving parts
and safely houses all the cables and wiring.
The second removable cover allows access to all the setting and program functions in complete safety.
Internally, the carter contains the mechanism required to activate the manual release system.
This allows the manoeuvre to be fluid and manageable under all working
conditions whilst at the same time covering all possible manual release mechanisms.
Mechanisms installed by the door manufacturers: a handle directly installed on the geared motor,
an external release cord or via a hexagonal key operated mechanism that is accessed
through the door panel both to the right and to the left of the motor.
The door position is encoder controlled and self-programming thus reducing installation times to a
minimum and optimising the programming procedure.
Repositioning takes place automatically whenever foreign objects get in the way of the door as it is moving.

GLMECHA230M Control Unit

The electronic control unit is completed by the anti-crush and “soft start” and “soft
stop” functions and a display that monitors the programming stages and counts the
number of manoeuvres carried out by the machine.
Multi-decoding:
The product range is factory fitted with a multi-decoding remote control module
(system S449 – S486 – S504 – S508).
For garage doors larger than 4 metres and for garage doors with an in-built pedestrian
door (mounted laterally) a second slave motor is required.

TECHNICAL SPECIFICATIONS GLMECHA230S MOTOR

MOTOR SPECIFICATIONS GLMECHA24M GLMECHA230M
Motor power supply                                                     V             230
Nominal electrical input                                               A             1,6
Power input                                                                 W            350
Duty cycle                                                                    %            25
Geared motor speed (at max. torque)                              revs/min  1,6
Maximum torque                                                           Nm          350
Operating temperature range                                          °C           -20°…+55°
Protection grade                                                            IP            54

ACCESSORIES GLMECHA230S

SUPPORT BRACKETS
GLOPS2   :in zinc-plated metal, 60cm.
GLOPS02 : in zinc-plated metal, 200cm.

TRANSMISSION SHAFTS
AT20   : 20cm including support bracket.
AT150  : 150cm including support bracket.
AT200 : 200cm including support bracket.

TRANSMISSION ARMS
BDB     : Two straight arms with round bushing for AT shafts.
BDBUS :  One straight arm with grooved bushing for motor drive shaft.
BCB      : Two curved arms with round bushing for AT shafts.

SUPPORT BRACKET
SRSTAR : ADJUSTABLE BRACKETS
Axle shaft supports.
GLJSTAP  : ADAPTER KIT GL20-GLMECHA
Adapter kit to instal the GLMECHA garage door motor in an old GL20 installation

GLMECHAFC : TRAVEL LIMIT KIT
Travel limit switch kit and encoder for GLMECHA24.

KSE : EXTERNAL RELEASE CORD KIT
to connect to the door handle.

GL24SB : EXTERNAL RELEASE CORD KIT
length 2000mm

GLJSTAP : ADAPTER KIT GL20-GLSTAR
Adapter kit to instal the STAR garage door motor in an old GL20
installation

KBNIMH-4 : KIT BATTERY CHARGER + NIMH BATTERIES
Allows the GLMECHA24M unit to work during blackouts.

MODCA : DATA INTERFACE MODULE VIA CABLE
The module allows the exchange of information between the motor’s electronic
control unit and the Cardin 3G/WF interface and also allows you to connect
two motors via cable in order to use the synchronised master/slave function.

MODBT : BLUETOOTH MODULE
The module allows the exchange of information between the motor’s
electronic control unit and the Cardin 3G/WF interface via Bluetooth or
directly between the control units and the apps CRD ONE and CRD TWO