433MHz radio controls and receivers for consumer and industrial use
-
DKS1000T – KEYPAD WITH BACKLIGHTING
DKS1000T – KEYPAD WITH BACKLIGHTING
DKS1000T – KEYPAD WITH BACKLIGHTING
Surface-mounting IP57.
The metal antitamper keyboard DKS1000T has 12 keys, 10 numerical (0-9), one
confirm key (*) and one cancel key (#) by means of which it is possible to program
the backlighting and other operational parameters. It is suitable for connection with
the DKS security system via a shielded unipolar wire carrying both the power supply
and the data line. It is also fitted with auxiliary serial line allowing it to connect to the
CARHF2 system (consult the Liberté catalogue).€86,00 + TAXDKS1000T – KEYPAD WITH BACKLIGHTING
€86,00 + TAX -
INTBTC4 BLUETOOTH INTERFACE
INTBTC4 – BLUETOOTH INTERFACE IN BOX (12 / 24Vac-dc).
INTBTC4 – BLUETOOTH INTERFACE WITH FOUR RELAYS
The interface with a Bluetooth module allows the control of four relays
with NO or NC contacts. The selection dip-switches (one block per
relay) allow you to select the relay’s activation method: impulsive, ON/
OFF, timer controlled or remotely controlled relay activation using the
programming calender in the Cardin multiprotocol interface Cardin
RCQ504/508W00. The programming buttons (one per relay) allow
you to set the activation times for the relays (from 1 s to 5 min) for
the timer controlled mode.
The Bluetooth module MODBT is to be ordered separately.
Power supply 12/24Vac-dc.
Electrical input 50mA.
Overall dimensions 95 x 75 x 25.
Indoor box IP20€60,00 + TAXINTBTC4 BLUETOOTH INTERFACE
€60,00 + TAX -
RPQ508T10 RADIOPROGRAMMERS SUN BLINDS AWNINGS
RPQ508T10 – 868MHz RADIOPROGRAMMERS SUN BLINDS AWNINGS (400W)
RPQ508T10 – 868MHz RADIOPROGRAMMERS FOR ROLLING SHUTTERS, SUN BLINDS
AND AWNINGS (230V-1000W)
Logic integrated into the receiver with work time management and output
for the control of one motor. Suitable for the command of automatic rolling
shutters, sun blinds and awnings. Inputs for one opening and one closing
command via cable. Manual operation in either the opening/closing or only
closing direction.
ndoor box IP20.
Overall dimensions 106 x 36 x 21.€64,00 + TAXRPQ508T10 RADIOPROGRAMMERS SUN BLINDS AWNINGS
€64,00 + TAX -
RPQ504T10 RADIOPROGRAMMERS SUN BLINDS AWNINGS
RPQ504T10 – 433MHz RADIOPROGRAMMERS SUN BLINDS AWNINGS (400W)
RPQ504T10 – 433MHz RADIOPROGRAMMER FOR ROLLING SHUTTERS, SUN BLINDS
AND AWNINGS (230V-1000W)
Logic integrated into the receiver with work time management and output
for the control of one motor. Suitable for the command of automatic rolling
shutters, sun blinds and awnings. Inputs for one opening and one closing
command via cable. Manual operation in either the opening/closing or only
closing direction.
ndoor box IP20.
Overall dimensions 106 x 36 x 21.€64,00 + TAXRPQ504T10 RADIOPROGRAMMERS SUN BLINDS AWNINGS
€64,00 + TAX -
RPQ508RNA0 RADIOPROGRAMMERS SHUTTER AWNING
RPQ508RNA0 – 868MHz RADIOPROGRAMMERS SHUTTER AWNING (400W)
RPQ508RNA0 – 868MHz RADIOPROGRAMMERS FOR ROLLING SHUTTER / AWNING (400 W)
The radio programmer allows the remote control of one single
phase motor and finds its best use in the command of automatic
rolling shutters and awnings. The appliance is designed for the
connection of an anemometer (see chapter COMMAND AND SAFETY DEVICES).
Indoor box IP43.
Power supply 230Vac.
Overall dimensions 120 x 85 x 20€87,00 + TAXRPQ508RNA0 RADIOPROGRAMMERS SHUTTER AWNING
€87,00 + TAX -
RPQ504RNA0 RADIOPROGRAMMERS SHUTTERS AWNINGS
RPQ504RNA0 – 433MHz RADIOPROGRAMMERS SHUTTERS AWNINGS (400W)
RPQ504RNA0 -433MHz RADIOPROGRAMMERS FOR ROLLING SHUTTERS / AWNINGS (400 W)
The radio programmer allows the remote control of one single
phase motor and finds its best use in the command of automatic
rolling shutters and awnings. The appliance is designed for the
connection of an anemometer (see chapter COMMAND AND SAFETY DEVICES).
Indoor box IP43.
Power supply 230Vac.
Overall dimensions 120 x 85 x 20€87,00 + TAXRPQ504RNA0 RADIOPROGRAMMERS SHUTTERS AWNINGS
€87,00 + TAX -
RPQ504IT0 RADIO PROGRAMMER ON/OFF
RPQ504IT0 – 433MHz RADIO PROGRAMMER ON/OFF + TIMER (230V-2000W)
RPQ504IT0 – 433MHz RADIO PROGRAMMERS ON/OFF + TIMER (2000W)
For specific uses such as the remote control of external (gardens) and
internal lighting; the remote control of power sockets. Connecting the
radioprogrammer to a light detection device will prevent it from switching
on the lighting system during the daytime.Possibility of memorising up to
1000 user codes. Timer settings: from 1 min. to 23 hrs. 59 min.
All weather box in ABS – IP55.
Overall dimensions 139 x 115 x 44.€81,00 + TAXRPQ504IT0 RADIO PROGRAMMER ON/OFF
€81,00 + TAX -
RPQ504 RADIOPROGRAMMER ROLLING GRILLS
RPQ504 – 433MHz RADIOPROGRAMMER FOR ROLLING GRILLS (230V-600W)
RPQ504 – 433MHz RADIOPROGRAMMERS FOR ROLLING GRILLS (230V-600W)
Logic integrated into the receiver and output for the control of one motor.
Power supply output for a pair of Cardin photoelectric cells. Possibility of
memorising up to 1000 transmitters.
All weather box in ABS – IP55.
Overall dimensions 139 x 115 x 44.€84,00 + TAXRPQ504 RADIOPROGRAMMER ROLLING GRILLS
€84,00 + TAX -
RCQ504W00 MULTIPROTOCOL INTERFACE
RCQ504W00 – 433MHz MULTIPROTOCOL INTERFACE IN BOX (12 / 24Vac-dc).
RCQ504W00 – 433MHz MODULAR STANDARD OUTDOOR MULTIPROTOCOL INTERFACE IN BOX (12 / 24Vac-dc).
Power supply 12/24Vac-dc.
Electrical input 20mA.
Overall dimensions 148 x 118 x 40.
All weather box in ABS – IP55.
Carrier frequency 433,92MHz – 868,3MHz.
The interface is able to decode a radio frequency signal coming
from a S504-S508 transmitter or via cable from a DKS1000T,
DKSTPT, DKSDUALT and output a Wiegand/ISO-3554 digital signal,
containing the transmitter code, in 13 different formats.
It is fitted with a USB for connection to a PC and an input that can be
connected to a timer or a switch with the aim of enabling or disabling
the interface over different time periods. Rolling Code management
with transmitter memorization on the interface.€95,00 + TAXRCQ504W00 MULTIPROTOCOL INTERFACE
€95,00 + TAX -
KT-RQM504C1-TXQ504C2
RQM504C2 – 433MHz STANDARD MIN 2-CHANNEL RECEIVER IN BOX (12 / 24Vac-dc).
RQM504C2 – 433MHz STANDARD INDOOR MINI 2-CHANNEL RECEIVER IN BOX (12 / 24Vac-dc).
The unit RQM504C2 is an electronic circuit with a 10-way terminal block; Fitted with 2 relay
channels which can be set to ON/OFF or impulsive.
Possibility of memorising up to 1000 codes.ABS indoor enclosure – IP20.
Overall dimensions(mm) 95 x 75 x 25.€99,00€130,00+ TAXKT-RQM504C1-TXQ504C2
€99,00€130,00+ TAX -
RQM504C1
RQM504C2 – 433MHz STANDARD MIN 2-CHANNEL RECEIVER IN BOX (12 / 24Vac-dc).
RQM504C2 – 433MHz STANDARD INDOOR MINI 2-CHANNEL RECEIVER IN BOX (12 / 24Vac-dc).
The unit RQM504C2 is an electronic circuit with a 10-way terminal block; Fitted with 2 relay
channels which can be set to ON/OFF or impulsive.
Possibility of memorising up to 1000 codes.ABS indoor enclosure – IP20.
Overall dimensions(mm) 95 x 75 x 25.€51,00 + TAXRQM504C1
€51,00 + TAX -
NOIRERB2
NOIRERB2 / NOIRE RB2 RECEIVER 433,92 MHz
NOIRE RB2 / NOIRERB2 -REMOTE CONTROL RECEIVER / TRASMITTER
NOIRE remote control are flexible; they can work at with fix code 433.92 MHz or with Rolling Code,
to grant maximum safety.
All NOIRE transmitters can be personalized though a family code, by using programming unit PRG NOIRE.
The refined design, sober and essential, assures the maximum ergonomic comfort.
The remote control range is completed by code selflearning receivers and programmable outputs.€60,00 + TAXNOIRERB2
€60,00 + TAX
