433MHz radio controls and receivers for consumer and industrial use
-
SAFEKITCDR4 – KIT STATIONARY UNIT + PAIR PHOTOCELLS
SAFEKITCDR4 – KIT STATIONARY UNIT + WIRELESS PHOTOCELLS RADIO 433MHz
SAFEKITCDR4 – KIT PAIR OF PHOTOCELLS WIRELESS RADIO + STATIONARY TRANSCEIVER UNIT INTERFACE 433MHz
SAFECDR4 – PAIR OF PHOTOCELLS RADIO ( WIRELESS PHOTOELECTRIC CELLS)
SAFEDECX4 – STATIONARY TRANSCEIVER UNIT
ROLLING CODE FM RADIO system. transmission frequency: 433MHz
SAFECDR4 – PAIR OF PHOTOCELLS RADIO ( WIRELESS PHOTOELECTRIC CELLS)
3V lithium battery power supply.
Maximum radio signal range 30m.
Maximum infrared range 10m.
Transmitter and receiver housed in shockproof and waterproof
cases IP65.STATIONARY TRANSCEIVER UNIT
Power supply 12/24Vac-dc.
Maximum radio signal range 30m.
8 safety devices.
3 safety outputs NC/8.2kΩ.
Shockproof case IP65€202,00 + TAXSAFEKITCDR4 – KIT STATIONARY UNIT + PAIR PHOTOCELLS
€202,00 + TAX -
SAFEKIT4 – KIT STATIONARY UNIT + SAFETY EDGE INTERFACE
SAFEKIT4 – KIT STATIONARY UNIT + SAFETY EDGE INTERFACE 433MHz
SAFEKIT4 – KIT SAFETY EDGE INTERFACE + STATIONARY TRANSCEIVER UNIT INTERFACE FOR SENSITIVE EDGE 433MHz
SAFEPRC4 – SAFETY EDGE TRANSCEIVER INTERFACE
SAFEDECX4 – STATIONARY TRANSCEIVER UNIT
ROLLING CODE FM RADIO system. transmission frequency: 433MHz
SAFETY EDGE TRANSCEIVER INTERFACE
3V lithium battery power supply.
Safety edge signal input NC/8.2kΩ.
Maximum radio signal range 30m.
Shockproof case IP65.STATIONARY TRANSCEIVER UNIT
Power supply 12/24Vac-dc.
Maximum radio signal range 30m.
8 safety devices.
3 safety outputs NC/8.2kΩ.
Shockproof case IP65.€126,00 + TAXSAFEKIT4 – KIT STATIONARY UNIT + SAFETY EDGE INTERFACE
€126,00 + TAX -
SAFEDECX4 – STATIONARY TRANSCEIVER UNIT
SAFEDECX4 – STATIONARY TRANSCEIVER UNIT INTERFACE 433MHz
SAFEDECX4 – STATIONARY TRANSCEIVER UNIT INTERFACE FOR SENSITIVE EDGE PHOTOCELLS OR GENERAL DEVICES 433MHz
Power supply 12/24Vac-dc.
Maximum radio signal range 30m.
8 safety devices.
3 safety outputs NC/8.2kΩ.
Shockproof case IP65.
ROLLING CODE FM RADIO system. transmission frequency: 433MHz€75,00 + TAXSAFEDECX4 – STATIONARY TRANSCEIVER UNIT
€75,00 + TAX -
SAFEPRC4 – WIRELESS RADIO PHOTOCELLS
SAFECDR4 – PAIR OF WIRELESS PHOTOCELL RADIO PHOTOELECTRIC CELLS 433MHz
SAFECDR4 – PAIR OF WIRELESS PHOTOELECTRIC CELLS RADIO PHOTOCELLS 433MHz
3V lithium battery power supply.
Maximum radio signal range 30m.
Maximum infrared range 10m.
Transmitter and receiver housed in shockproof and waterproof cases IP65.
ROLLING CODE FM RADIO system. transmission frequency: 433MHz€129,00 + TAXSAFEPRC4 – WIRELESS RADIO PHOTOCELLS
€129,00 + TAX -
SAFEPRC4 – SAFETY EDGE TRANSCEIVER INTERFACE
SAFEPRC4 – SAFETY EDGE TRANSCEIVER INTERFACE 433MHz
SAFEPRC4 – SAFETY EDGE TRANSCEIVER INTERFACE FOR SENSITIVE EDGE 433MHz
3V lithium battery power supply.
Safety edge signal input NC/8.2kΩ.
Maximum radio signal range 30m.
Shockproof case IP65.
ROLLING CODE FM RADIO system. transmission frequency: 433MHz€53,00 + TAXSAFEPRC4 – SAFETY EDGE TRANSCEIVER INTERFACE
€53,00 + TAX -
DKSTP – KIT TRANSPONDER + INTERFACE
DKS1000T – KEYPAD WITH BACKLIGHTING
DKS1000T – KEYPAD WITH BACKLIGHTING
Surface-mounting IP57.
The metal antitamper keyboard DKS1000T has 12 keys, 10 numerical (0-9), one
confirm key (*) and one cancel key (#) by means of which it is possible to program
the backlighting and other operational parameters. It is suitable for connection with
the DKS security system via a shielded unipolar wire carrying both the power supply
and the data line. It is also fitted with auxiliary serial line allowing it to connect to the
CARHF2 system (consult the Liberté catalogue).€91,00 + TAXDKSTP – KIT TRANSPONDER + INTERFACE
€91,00 + TAX -
DKS1000 – KIT KEYPAD + ITERFACE 4CH
DKS1000 – KEYBOARD + INTERFACE KIT
DKS1000 – KEYBOARD + INTERFACE KIT consists of two products:
DKS1000T – BACKLIT KEYBOARD
DKS1000R – 4CH INTERFACEDKS1000T – KEYPAD WITH BACKLIGHTING
Surface-mounting IP57.
The metal antitamper keyboard DKS1000T has 12 keys, 10 numerical (0-9), one
confirm key (*) and one cancel key (#) by means of which it is possible to program
the backlighting and other operational parameters.
DKS1000R – 4 CHANNEL INTERFACE
The interface box is easy to install and has the following features:
– power supply 12 or 24Vac-dc;
– 4 normally open relays (one for each channel);
– management of up to 3 peripheral devices (keypads and/or transponder readers;
– 1 multifunction key for the following functions: storing a code, cancelling a code,
cancelling the entire memory content, inserting an activation code for the “remote
memorisation” function. It is possible to store 1000 codes in memory with
a maximum of 6 digits for each code. Each code can activate up to 4 channels
(different functions).€106,00 + TAXDKS1000 – KIT KEYPAD + ITERFACE 4CH
€106,00 + TAX -
DKSDUALT – KEYPAD WITH TRANSPONDER
DKSDUALT – KEYPAD WITH TRANSPONDER
DKSDUALT – KEYPAD WITH TRANSPONDER FUNCTION
The DKSDUALT – KEYPAD WITH TRANSPONDER is Surface-mounting IP57.
The DKSDUALT device has the following features:
– 12 keys with backlighting;
– backlighting controlled by the proximity sensor.
Allows the interface to be activated by either typing in a code or by proximity
reading an S500 transmitter, a TAG or a CARD.€91,00 + TAXDKSDUALT – KEYPAD WITH TRANSPONDER
€91,00 + TAX -
DKSTPT – TRANSPONDER
DKSTPT – TRANSPONDER READER
DKSTPT – TRANSPONDER READER
The DKSTPT transponder reader is Surface-mounting IP57.
Using dip-switch settings it is possible to program the backlighting and other
operational parameters. It is suitable for connection with the DKS security system
via a shielded unipolar wire carrying both the power supply and the data line. Allows
the interface to be activated by proximity reading an S500 transmitter, a TAG or a
CARD. It is also fitted with auxiliary serial line allowing it to connect to the CARHF2
system (consult the Liberté catalogue).€57,00 + TAXDKSTPT – TRANSPONDER
€57,00 + TAX -
DKS1000R – INTERFACE 4CH
DKS1000R – INTERFACE 4CH
DKS1000R 4-CHANNEL INTERFACE
The interface 4CH DKS1000R box is easy to install and has the following features:
– power supply 12 or 24Vac-dc;
– 4 normally open relays (one for each channel);
– management of up to 3 peripheral devices (keypads and/or transponder readers;
– 1 multifunction key for the following functions: storing a code, cancelling a code,
cancelling the entire memory content, inserting an activation code for the “remote
memorisation” function. It is possible to store 1000 codes in memory with
a maximum of 6 digits for each code. Each code can activate up to 4 channels
(different functions).€37,00 + TAXDKS1000R – INTERFACE 4CH
€37,00 + TAX -
DKS1000T – KEYPAD WITH BACKLIGHTING
DKS1000T – KEYPAD WITH BACKLIGHTING
DKS1000T – KEYPAD WITH BACKLIGHTING
Surface-mounting IP57.
The metal antitamper keyboard DKS1000T has 12 keys, 10 numerical (0-9), one
confirm key (*) and one cancel key (#) by means of which it is possible to program
the backlighting and other operational parameters. It is suitable for connection with
the DKS security system via a shielded unipolar wire carrying both the power supply
and the data line. It is also fitted with auxiliary serial line allowing it to connect to the
CARHF2 system (consult the Liberté catalogue).€86,00 + TAXDKS1000T – KEYPAD WITH BACKLIGHTING
€86,00 + TAX -
INTBTC4 BLUETOOTH INTERFACE
INTBTC4 – BLUETOOTH INTERFACE IN BOX (12 / 24Vac-dc).
INTBTC4 – BLUETOOTH INTERFACE WITH FOUR RELAYS
The interface with a Bluetooth module allows the control of four relays
with NO or NC contacts. The selection dip-switches (one block per
relay) allow you to select the relay’s activation method: impulsive, ON/
OFF, timer controlled or remotely controlled relay activation using the
programming calender in the Cardin multiprotocol interface Cardin
RCQ504/508W00. The programming buttons (one per relay) allow
you to set the activation times for the relays (from 1 s to 5 min) for
the timer controlled mode.
The Bluetooth module MODBT is to be ordered separately.
Power supply 12/24Vac-dc.
Electrical input 50mA.
Overall dimensions 95 x 75 x 25.
Indoor box IP20€60,00 + TAXINTBTC4 BLUETOOTH INTERFACE
€60,00 + TAX