433MHz radio controls and receivers for consumer and industrial use

  • DKSTPM – KIT TRANSPONDER IN ZAMA + INTERFACE

    DKSTPM – KIT TRANSPONDER IN ZAMA + INTERFACE

    DKSTPM       – TRANSPONDER IN ZAMA + INTERFACE KIT consists of two products:
    DKSTPMT     – TRANSPONDER IN ZAMA READER
    DKS1000R     – 4CH INTERFACE

    DKSTPMT – TRANSPONDER IN ZAMA READER
    Surface-mounting IP57.
    Using dip-switch settings it is possible to program the backlighting and other
    operational parameters. It is suitable for connection with the DKS security system
    via a shielded unipolar wire carrying both the power supply and the data line. Allows
    the interface to be activated by proximity reading an S500 transmitter, a TAG or a
    CARD. It is also fitted with auxiliary serial line allowing it to connect to the CARHF4G
    system .

    DKS1000R – 4 CHANNEL INTERFACE
    The interface box is easy to install and has the following features:
    – power supply 12 or 24Vac-dc;
    – 4 normally open relays (one for each channel);
    – management of up to 3 peripheral devices (keypads and/or transponder readers;
    – 1 multifunction key for the following functions: storing a code, cancelling a code,
    cancelling the entire memory content, inserting an activation code for the “remote
    memorisation” function. It is possible to store 1000 codes in memory with
    a maximum of 6 digits for each code. Each code can activate up to 4 channels
    (different functions).

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

  • DKSTPMT – TRANSPONDER IN ZAMAK CASE

    DKSTPMT – TRANSPONDER READER IN ZAMAK CASE

    DKSTPMT – TRANSPONDER READER  IN ZAMAK CASE
    TRANSPONDER READER Surface-mounting IP57.
    Using dip-switch settings it is possible to program the backlighting and other
    operational parameters. It is suitable for connection with the DKS security system
    via a shielded unipolar wire carrying both the power supply and the data line. Allows
    the interface to be activated by proximity reading an S500 transmitter, a TAG or a
    CARD. It is also fitted with auxiliary serial line allowing it to connect to the CARHF4G
    system.

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

  • SAFEKITCDR4 – KIT STATIONARY UNIT + PAIR PHOTOCELLS

    SAFEKITCDR4 – KIT STATIONARY UNIT + WIRELESS PHOTOCELLS RADIO 433MHz

    SAFEKITCDR4 – KIT PAIR OF PHOTOCELLS WIRELESS RADIO + STATIONARY TRANSCEIVER UNIT INTERFACE 433MHz
    SAFECDR4 – PAIR OF PHOTOCELLS RADIO ( WIRELESS PHOTOELECTRIC CELLS)
    SAFEDECX4 – STATIONARY TRANSCEIVER UNIT
    ROLLING CODE FM RADIO system. transmission frequency: 433MHz

    SAFECDR4 – PAIR OF PHOTOCELLS RADIO ( WIRELESS PHOTOELECTRIC CELLS)
    3V lithium battery power supply.
    Maximum radio signal range 30m.
    Maximum infrared range 10m.
    Transmitter and receiver housed in shockproof and waterproof
    cases IP65.

    STATIONARY TRANSCEIVER UNIT
    Power supply 12/24Vac-dc.
    Maximum radio signal range 30m.
    8 safety devices.
    3 safety outputs NC/8.2kΩ.
    Shockproof case IP65

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

  • SAFEKIT4 – KIT STATIONARY UNIT + SAFETY EDGE INTERFACE

    SAFEKIT4 – KIT STATIONARY UNIT + SAFETY EDGE INTERFACE 433MHz

    SAFEKIT4 – KIT SAFETY EDGE INTERFACE + STATIONARY TRANSCEIVER UNIT INTERFACE FOR SENSITIVE EDGE 433MHz
    SAFEPRC4 – SAFETY EDGE TRANSCEIVER INTERFACE
    SAFEDECX4 – STATIONARY TRANSCEIVER UNIT
    ROLLING CODE FM RADIO system. transmission frequency: 433MHz

    SAFETY EDGE TRANSCEIVER INTERFACE
    3V lithium battery power supply.
    Safety edge signal input NC/8.2kΩ.
    Maximum radio signal range 30m.
    Shockproof case IP65.

    STATIONARY TRANSCEIVER UNIT
    Power supply 12/24Vac-dc.
    Maximum radio signal range 30m.
    8 safety devices.
    3 safety outputs NC/8.2kΩ.
    Shockproof case IP65.

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

  • SAFEDECX4 – STATIONARY TRANSCEIVER UNIT

    SAFEDECX4 – STATIONARY TRANSCEIVER UNIT INTERFACE 433MHz

    SAFEDECX4 – STATIONARY TRANSCEIVER UNIT INTERFACE FOR SENSITIVE EDGE PHOTOCELLS OR GENERAL DEVICES 433MHz
    Power supply 12/24Vac-dc.
    Maximum radio signal range 30m.
    8 safety devices.
    3 safety outputs NC/8.2kΩ.
    Shockproof case IP65.
    ROLLING CODE FM RADIO system. transmission frequency: 433MHz

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

  • SAFEPRC4 – WIRELESS RADIO PHOTOCELLS

    SAFECDR4 – PAIR OF WIRELESS PHOTOCELL RADIO PHOTOELECTRIC CELLS 433MHz

    SAFECDR4 – PAIR OF WIRELESS PHOTOELECTRIC CELLS RADIO PHOTOCELLS 433MHz
    3V lithium battery power supply.
    Maximum radio signal range 30m.
    Maximum infrared range 10m.
    Transmitter and receiver housed in shockproof and waterproof cases IP65.
    ROLLING CODE FM RADIO system. transmission frequency: 433MHz

  • SAFEPRC4 – SAFETY EDGE TRANSCEIVER INTERFACE

    SAFEPRC4 – SAFETY EDGE TRANSCEIVER INTERFACE 433MHz

    SAFEPRC4 – SAFETY EDGE TRANSCEIVER INTERFACE FOR SENSITIVE EDGE 433MHz
    3V lithium battery power supply.
    Safety edge signal input NC/8.2kΩ.
    Maximum radio signal range 30m.
    Shockproof case IP65.
    ROLLING CODE FM RADIO system. transmission frequency: 433MHz

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

  • DKSTP – KIT TRANSPONDER + INTERFACE

    DKSTP – KIT TRANSPONDER + INTERFACE

    DKSTP – KIT DISCONTINUED IN PHASE OUT
    REPLACED BY THE KIT: DKSTPM

    DKSTP       – TRANSPONDER + INTERFACE KIT consists of two products:
    DKSTPT     – TRANSPONDER READER
    DKS1000R – 4CH INTERFACE

    DKSTPT – TRANSPONDER READER
    Surface-mounting IP57.
    Using dip-switch settings it is possible to program the backlighting and other
    operational parameters. It is suitable for connection with the DKS security system
    via a shielded unipolar wire carrying both the power supply and the data line. Allows
    the interface to be activated by proximity reading an S500 transmitter, a TAG or a
    CARD. It is also fitted with auxiliary serial line allowing it to connect to the CARHF2
    system (consult the Liberté catalogue).
    DKS1000R – 4 CHANNEL INTERFACE
    The interface box is easy to install and has the following features:
    – power supply 12 or 24Vac-dc;
    – 4 normally open relays (one for each channel);
    – management of up to 3 peripheral devices (keypads and/or transponder readers;
    – 1 multifunction key for the following functions: storing a code, cancelling a code,
    cancelling the entire memory content, inserting an activation code for the “remote
    memorisation” function. It is possible to store 1000 codes in memory with
    a maximum of 6 digits for each code. Each code can activate up to 4 channels
    (different functions).

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

  • DKS1000 – KIT KEYPAD + ITERFACE 4CH

    DKS1000 – KEYBOARD + INTERFACE KIT

    DKS1000 – KEYBOARD + INTERFACE KIT consists of two products:
    DKS1000T – BACKLIT KEYBOARD
    DKS1000R – 4CH INTERFACE

    DKS1000T – KEYPAD WITH BACKLIGHTING
    Surface-mounting IP57.
    The metal antitamper keyboard DKS1000T has 12 keys, 10 numerical (0-9), one
    confirm key (*) and one cancel key (#) by means of which it is possible to program
    the backlighting and other operational parameters.
    DKS1000R – 4 CHANNEL INTERFACE
    The interface box is easy to install and has the following features:
    – power supply 12 or 24Vac-dc;
    – 4 normally open relays (one for each channel);
    – management of up to 3 peripheral devices (keypads and/or transponder readers;
    – 1 multifunction key for the following functions: storing a code, cancelling a code,
    cancelling the entire memory content, inserting an activation code for the “remote
    memorisation” function. It is possible to store 1000 codes in memory with
    a maximum of 6 digits for each code. Each code can activate up to 4 channels
    (different functions).

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

  • DKSDUALT – KEYPAD WITH TRANSPONDER

    DKSDUALT – KEYPAD WITH TRANSPONDER

    DKSDUALT – KEYPAD WITH TRANSPONDER FUNCTION
    The DKSDUALT – KEYPAD WITH TRANSPONDER is Surface-mounting IP57.
    The DKSDUALT device has the following features:
    – 12 keys with backlighting;
    – backlighting controlled by the proximity sensor.
    Allows the interface to be activated by either typing in a code or by proximity
    reading an S500 transmitter, a TAG or a CARD.

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

  • DKSTPT – TRANSPONDER

    DKSTPT – TRANSPONDER READER

    DKSTPT – TRANSPONDER READER IS IN PHASE OUT
    REPLACED WITH : DKSTPMT -TRASPONDER READER IN ZAMAK CASE

    DKSTPT – TRANSPONDER READER
    The DKSTPT transponder reader is Surface-mounting IP57.
    Using dip-switch settings it is possible to program the backlighting and other
    operational parameters. It is suitable for connection with the DKS security system
    via a shielded unipolar wire carrying both the power supply and the data line. Allows
    the interface to be activated by proximity reading an S500 transmitter, a TAG or a
    CARD. It is also fitted with auxiliary serial line allowing it to connect to the CARHF2
    system (consult the Liberté catalogue).

    DKSTPT – TRANSPONDER

    57,00 + TAX
  • DKS1000R – INTERFACE 4CH

    DKS1000R – INTERFACE 4CH

    DKS1000R 4-CHANNEL INTERFACE
    The interface 4CH DKS1000R box is easy to install and has the following features:
    – power supply 12 or 24Vac-dc;
    – 4 normally open relays (one for each channel);
    – management of up to 3 peripheral devices (keypads and/or transponder readers;
    – 1 multifunction key for the following functions: storing a code, cancelling a code,
    cancelling the entire memory content, inserting an activation code for the “remote
    memorisation” function. It is possible to store 1000 codes in memory with
    a maximum of 6 digits for each code. Each code can activate up to 4 channels
    (different functions).

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

Main Menu