433MHz radio controls and receivers for consumer and industrial use
- Sorry, this product cannot be purchased.
-
FOXRB2
FOX RB2 – REMOTE CONTROLS RECEIVER
FOX RB2 RECEIVER IS PHASE OUT
IT IS REPLACED BY THE NOIRE EDGE SERIES AND 500 SERIESFOXRB2 – REMOTE CONTROLS RECEIVER
Telcoma FOX RB2 radio controls , models of high-technology electronic, have been
designed to supply the user with an excellent functionality and very high-quality
electronic grants the perfect efficiency.
The refined design, sober and essential, assures the maximum ergonomic comfort. -
TANGORB2 SW
TANGORB2 SW – REMOTE CONTROLS RECEIVER
TANGORB2 SW – REMOTE CONTROLS RECEIVER IS PHASE OUT
IT IS REPLACED BY THE EDGE NOIRE 500 SERIESTANGORB2 SW / TANGO RB2 SW – REMOTE CONTROLS RECEIVER
Telcoma TANGORB2 SW or TANGORB2SW radio controls Receiver , models of high-technology electronic,
have been designed to supply the user with an excellent functionality and very high-quality
electronic grants the perfect efficiency.
The refined design, sober and essential, assures the maximum ergonomic comfort. -
TANGO4SW
TANGO4SW / TANGO 4SW – REMOTE CONTROLS TRASMITTER
TANGO4SW / TANGO 4SW – REMOTE CONTROLS RECEIVER / TRASMITTER
Telcoma radio controls, models of high-technology electronic, have been designed to supply the user
with an excellent functionality and very high-quality electronic grants the perfect efficiency.
The refined design, sober and essential, assures the maximum ergonomic comfort. -
DKSTP – KIT TRANSPONDER + INTERFACE
DKSTP – KIT TRANSPONDER + INTERFACE
DKSTP – KIT DISCONTINUED IN PHASE OUT
REPLACED BY THE KIT: DKSTPMDKSTP – TRANSPONDER + INTERFACE KIT consists of two products:
DKSTPT – TRANSPONDER READER
DKS1000R – 4CH INTERFACEDKSTPT – TRANSPONDER READER
Surface-mounting IP57.
Using dip-switch settings it is possible to program the backlighting and other
operational parameters. It is suitable for connection with the DKS security system
via a shielded unipolar wire carrying both the power supply and the data line. Allows
the interface to be activated by proximity reading an S500 transmitter, a TAG or a
CARD. It is also fitted with auxiliary serial line allowing it to connect to the CARHF2
system (consult the Liberté catalogue).
DKS1000R – 4 CHANNEL INTERFACE
The interface box is easy to install and has the following features:
– power supply 12 or 24Vac-dc;
– 4 normally open relays (one for each channel);
– management of up to 3 peripheral devices (keypads and/or transponder readers;
– 1 multifunction key for the following functions: storing a code, cancelling a code,
cancelling the entire memory content, inserting an activation code for the “remote
memorisation” function. It is possible to store 1000 codes in memory with
a maximum of 6 digits for each code. Each code can activate up to 4 channels
(different functions).If you are an electrician or automation specialist, call +39.0558778855
or write an email to: commerciale@automazione-cancelli.net
to get a quote/offer and an extra discount -
TANGO2SW
TANGO2SW – REMOTE CONTROLS TRASMITTER
TANGO2SW / TANGO 2SW – REMOTE CONTROLS RECEIVER / TRASMITTER
Telcoma radio controls, models of high-technology electronic, have been designed to supply the user
with an excellent functionality and very high-quality electronic grants the perfect efficiency.
The refined design, sober and essential, assures the maximum ergonomic comfort.TANGO 2SW
Portable transmitters 4 channels.€20,00 + TAXTANGO2SW
€20,00 + TAX -
NOIRE2E
NOIRE2E – REMOTE CONTROL TRASMITTER
NOIRE2E / NOIRE 2E – REMOTE RADIO CONTROL TRASMITTER ROLLING CODE 433.92MHz
NOIRE remote radio control are flexible; they can work at with fix code 433.92 MHz or with Rolling Code,
to grant maximum safety.
All NOIRE transmitters can be personalized though a family code, by using programming unit PRG NOIRE.
The refined design, sober and essential, assures the maximum ergonomic comfort.
The remote control range is completed by code selflearning receivers and programmable outputs.€24,00 + TAXNOIRE2E
€24,00 + TAX -
TXQ504C2
TXQ504C2 – 2-FUNCTION PRECODED TRANSMITTER (433MHz)
TXQ504C2 – QUARTZ TRANSMITTER DIGITAL REMOTE RADIO CONTROL WITH ROLLING CODES
2-function pre-coded remote control radio transmitter (433MHz)
TXQ504C2 – PRECODED TRANSMITTER – REMOTE RADIO CONTROL OR RADIO CONTROL
The TXQ504C2 transmitter container in shockproof plastic material.
3V lithium battery power supply CR2032.
Overall dimensions 35 x 80 x 11.
Radio system
433MHz – 868MHz FM ROLLING CODE
2128 CODE COMBINATIONS
REMOTE TRANSMITTER MEMORISATION
RFID: WIRELESS MEMORY
AERIAL ANS400 – ANQ800-1€23,00€28,00+ TAXTXQ504C2
€23,00€28,00+ TAX -
FM402E
FM402E – REMOTE CONTROL
FM402E – REMOTE CONTROL WITH FREQUENCY MODULATION
The FM400 radio controls and receivers offer high performance and safety thanks to the transmission
in frequency modulation at 433.92 MHz and with the Rolling-Code system which makes it non-clonable.
All FM transmitters can be customized with family code using the PRG FM programmer.
The refined, sober and essential design of the radio controls ensures maximum ergonomic comfort.
The range of radio controls is completed by receivers with self-learning code, removable memory and programmable outputs.
Special functions: self learning and the possibility to add codes remotely.FM402E REMOTE CONTROL
Multichannel remote control FM402E for fast and intuitive control of 2 functions of FM400 receivers.
Innovative and refined container with a white LED display which, placed under the semi-transparent plastic,
displays the selected channel. In the center, a rubberized keyboard with three function keys and two for channel up-down.
Equipped with practical non-slip rubber pads.€25,00 + TAXFM402E
€25,00 + TAX -
TXQ504C4
TXQ504C4 – 4-FUNCTION PRECODED TRANSMITTER (433MHz)
TXQ504C4 – QUARTZ DIGITAL REMOTE CONTROL WITH ROLLING CODES
4-function pre-coded remote control radio transmitter (433MHz)
TXQ504C4 – PRECODED TRANSMITTER – REMOTE CONTROL OR RADIO CONTROL
The TXQ504C4 transmitter container in shockproof plastic material.
3V lithium battery power supply CR2032.
Overall dimensions 35 x 80 x 11.
Radio system
433MHz – 868MHz FM ROLLING CODE
2128 CODE COMBINATIONS
REMOTE TRANSMITTER MEMORISATION
RFID: WIRELESS MEMORY
AERIAL ANS400 – ANQ800-1€25,00€30,00+ TAXTXQ504C4
€25,00€30,00+ TAX -
NOIRE4E
NOIRE4E – REMOTE CONTROL TRASMITTER
NOIRE4E / NOIRE 4E – REMOTE RADIO CONTROL TRASMITTER ROLLING CODE 433.92MHz
NOIRE remote radio control are flexible; they can work at with fix code 433.92 MHz or with Rolling Code,
to grant maximum safety.
All NOIRE transmitters can be personalized though a family code, by using programming unit PRG NOIRE.
The refined design, sober and essential, assures the maximum ergonomic comfort.
The remote control range is completed by code selflearning receivers and programmable outputs.€26,00 + TAXNOIRE4E
€26,00 + TAX -
EDGE4
EDGE4 / EDGE 4 – REMOTE RADIO CONTROL TRASMITTER 433,92 MHz
EDGE4 / EDGE 4 – REMOTE RADIO CONTROL TRASMITTER 433,92 MHz
EDGE 4 Portable transmitters 4 channels.
4-channel portable versions with code transfer function between two remote controls.
Black casing, bi-injection molded, with rubber top.
To have the maximum sensitivity and make the radio control indestructible.
Soft key ring supplied.
Compatible with TANGO SLIM series receivers (Old series in face out)€26,00 + TAXEDGE4
€26,00 + TAX -
EDGE2
EDGE2 / EDGE 2 – REMOTE CONTROLS TRASMITTER 433,92 MHz
EDGE2 / EDGE 2 – REMOTE RADIO CONTROL TRASMITTER 433,92 MHz
EDGE 2E Portable transmitters 2 channels.
2-channel portable versions with code transfer function between two remote controls.
Black casing, bi-injection molded, with rubber top.
To have the maximum sensitivity and make the radio control indestructible.
Soft key ring supplied.
Compatible with TANGO SLIM series receivers (Old series in face out)€24,00 + TAXEDGE2
€24,00 + TAX