General automation accessories
-
METALD3 – SELF-CALIBRATING METAL DETECTOR 24V
METALD3 – SELF-CALIBRATING METALLIC MASS DETECTOR 24V
METALD3 – SELF-CALIBRATION METAL DETECTOR OR METALLIC MASS DETECTOR 24V
Power supply:: 24Vac-dc 100mA
Sensitivity: 4 levels
Relay output: 3 (max 1A 30V)
Operating temperature range: -20°…+55°C
Protection grade: IP40
Overall dimensions: 146 x 64 x 38..DOUBLE RELAY WITH SERIAL EXCHANGE NO-NC
SENSITIVITY SELECTOR H-M-L AND RESET BUTTON
UNDECAL CONNECTION FOR DIN RAIL GUIDE
RAIL GUIDE SOCKET DIN 46277
SENSITIVITY SELECTION DIP-SWITCHES€114,00 + TAXMETALD3 – SELF-CALIBRATING METAL DETECTOR 24V
€114,00 + TAX -
DKS1000 – KIT KEYPAD + ITERFACE 4CH
DKS1000 – KEYBOARD + INTERFACE KIT
DKS1000 – KEYBOARD + INTERFACE KIT consists of two products:
DKS1000T – BACKLIT KEYBOARD
DKS1000R – 4CH INTERFACEDKS1000T – KEYPAD WITH BACKLIGHTING
Surface-mounting IP57.
The metal antitamper keyboard DKS1000T has 12 keys, 10 numerical (0-9), one
confirm key (*) and one cancel key (#) by means of which it is possible to program
the backlighting and other operational parameters.
DKS1000R – 4 CHANNEL INTERFACE
The interface box is easy to install and has the following features:
– power supply 12 or 24Vac-dc;
– 4 normally open relays (one for each channel);
– management of up to 3 peripheral devices (keypads and/or transponder readers;
– 1 multifunction key for the following functions: storing a code, cancelling a code,
cancelling the entire memory content, inserting an activation code for the “remote
memorisation” function. It is possible to store 1000 codes in memory with
a maximum of 6 digits for each code. Each code can activate up to 4 channels
(different functions).€106,00 + TAXDKS1000 – KIT KEYPAD + ITERFACE 4CH
€106,00 + TAX -
SRCKIT8 – KIT BI-CHANNEL UNIT + SAFETY EDGE INTERFACE
SRCKIT8 – KIT STATIONARY UNIT + SAFETY EDGE INTERFACE
SRCKIT8 – KIT SAFETY EDGE INTERFACE + BI-CHANNEL STATIONARY TRANSCEIVER UNIT 868MHz
SRCTXE – SAFETY EDGE TRANSCEIVER INTERFACE
SRCRXE – BI-CHANNEL STATIONARY TRANSCEIVER UNIT
ROLLING CODE FM RADIO system. transmission frequency: 868MHz
SRCTXE – SAFETY EDGE TRANSCEIVER INTERFACE
Power supply 2 alkaline or lithium AA batteries.
Safety edge signal input NC/8.2kΩ.
Maximum radio signal range 20m.
Shockproof case IP65.
SRCRXE – BI-CHANNEL STATIONARY TRANSCEIVER UNIT
Power supply 12/24Vac-dc.
Maximum radio signal range 20m.
8 safety devices – 2 safety outputs NC/8.2kΩ.
Shockproof case IP65.€103,00 + TAXSRCKIT8 – KIT BI-CHANNEL UNIT + SAFETY EDGE INTERFACE
€103,00 + TAX -
BBASL07N – MECHANICAL EDGE FOR GARAGE DOORS
BBASL07N – MECHANICAL EDGE FOR GARAGE DOORS
BBASL07N – 0.7 -METER MECHANICAL EDGE CONTACT N.C. – SAFETY DEVICES FOR GARAGE DOORS
BBASL10N – 1.0 -METER MECHANICAL EDGE CONTACT N.C. – SAFETY DEVICES FOR GARAGE DOORS
BBASL12N – 1.2 -METER MECHANICAL EDGE CONTACT N.C. – SAFETY DEVICES FOR GARAGE DOORS
BBASL18N – 1.8 -METER MECHANICAL EDGE CONTACT N.C. – SAFETY DEVICES FOR GARAGE DOORS
MECHANICAL AUXILIARY DEVICES FOR SWING / SLIDING GATES
High profile 61mm – contact output N.C. – colour black.
Safety edge for garage doors N.C. contact
This mechanical device is an extremely versatile safety edge in aluminium that can be fitted to
overhead garage doors, rolling shutters and other industrial closing devices. The edges are fitted with
sealed micro-switches and have a series of accessories permitting a variety of combinations and uses.€57,00 – €93,00 + TAXBBASL07N – MECHANICAL EDGE FOR GARAGE DOORS
€57,00 – €93,00 + TAX -
DKSTP – KIT TRANSPONDER + INTERFACE
DKS1000T – KEYPAD WITH BACKLIGHTING
DKS1000T – KEYPAD WITH BACKLIGHTING
Surface-mounting IP57.
The metal antitamper keyboard DKS1000T has 12 keys, 10 numerical (0-9), one
confirm key (*) and one cancel key (#) by means of which it is possible to program
the backlighting and other operational parameters. It is suitable for connection with
the DKS security system via a shielded unipolar wire carrying both the power supply
and the data line. It is also fitted with auxiliary serial line allowing it to connect to the
CARHF2 system (consult the Liberté catalogue).€91,00 + TAXDKSTP – KIT TRANSPONDER + INTERFACE
€91,00 + TAX -
DKSDUALT – KEYPAD WITH TRANSPONDER
DKSDUALT – KEYPAD WITH TRANSPONDER
DKSDUALT – KEYPAD WITH TRANSPONDER FUNCTION
The DKSDUALT – KEYPAD WITH TRANSPONDER is Surface-mounting IP57.
The DKSDUALT device has the following features:
– 12 keys with backlighting;
– backlighting controlled by the proximity sensor.
Allows the interface to be activated by either typing in a code or by proximity
reading an S500 transmitter, a TAG or a CARD.€91,00 + TAXDKSDUALT – KEYPAD WITH TRANSPONDER
€91,00 + TAX -
DKS1000T – KEYPAD WITH BACKLIGHTING
DKS1000T – KEYPAD WITH BACKLIGHTING
DKS1000T – KEYPAD WITH BACKLIGHTING
Surface-mounting IP57.
The metal antitamper keyboard DKS1000T has 12 keys, 10 numerical (0-9), one
confirm key (*) and one cancel key (#) by means of which it is possible to program
the backlighting and other operational parameters. It is suitable for connection with
the DKS security system via a shielded unipolar wire carrying both the power supply
and the data line. It is also fitted with auxiliary serial line allowing it to connect to the
CARHF2 system (consult the Liberté catalogue).€86,00 + TAXDKS1000T – KEYPAD WITH BACKLIGHTING
€86,00 + TAX -
NC8K2L16N – MECHANICAL EDGE CONTACT N.C.
NC8K2L16N – MECHANICAL EDGE CONTACT N.C.
NC8K2L16N – MECHANICAL EDGE N.C. CONTACT (L. 1,6m) – SAFETY DEVICE
NC8K2L20N – MECHANICAL EDGE N.C. CONTACT (L. 2.0m) – SAFETY DEVICE
NC8K2L25N – MECHANICAL EDGE N.C. CONTACT (L. 2,5m) – SAFETY DEVICE
NC8K2L30N – MECHANICAL EDGE N.C. CONTACT (L. 3.0m) – SAFETY DEVICEMECHANICAL SAFETY AUXILIARY DEVICES FOR SWING / SLIDING GATES
61mm high profile – N.C. contact output – black colour.Active mechanical safety edge with an N.C. contact for sliding gates / swing gates
The mechanical safety edge is used as a safety device in installations with automatic sliding gates with
horizontal movement and on other closing device installations (hinged gates etc.), where there is a real
risk of crushing or trapping.
Operation of the device is guaranteed by 2 micro-switches. Both of them intervene when the safety
edge and/or the pliable end caps are deformed.€54,00 – €82,00 + TAXNC8K2L16N – MECHANICAL EDGE CONTACT N.C.
€54,00 – €82,00 + TAX -
SAFEDECX8 – STATIONARY TRANSCEIVER UNIT
SAFEDECX8 – STATIONARY TRANSCEIVER UNIT INTERFACE 868MHz
SAFEDECX8 – STATIONARY TRANSCEIVER UNIT INTERFACE FOR SENSITIVE EDGE PHOTOCELLS OR GENERAL DEVICES 868MHz
Power supply 12/24Vac-dc.
Maximum radio signal range 30m.
8 safety devices.
3 safety outputs NC/8.2kΩ.
Shockproof case IP65.
ROLLING CODE FM RADIO system. transmission frequency: 868MHz€75,00 + TAXSAFEDECX8 – STATIONARY TRANSCEIVER UNIT
€75,00 + TAX -
SAFEDECX4 – STATIONARY TRANSCEIVER UNIT
SAFEDECX4 – STATIONARY TRANSCEIVER UNIT INTERFACE 433MHz
SAFEDECX4 – STATIONARY TRANSCEIVER UNIT INTERFACE FOR SENSITIVE EDGE PHOTOCELLS OR GENERAL DEVICES 433MHz
Power supply 12/24Vac-dc.
Maximum radio signal range 30m.
8 safety devices.
3 safety outputs NC/8.2kΩ.
Shockproof case IP65.
ROLLING CODE FM RADIO system. transmission frequency: 433MHz€75,00 + TAXSAFEDECX4 – STATIONARY TRANSCEIVER UNIT
€75,00 + TAX -
CP30BL – PASSIVE IMPACT EDGE
CP30BL – PASSIVE IMPACT EDGE
BP20BL – 2-METER PASSIVE IMPACT EDGE (PROFILE 70mm) – SAFETY DEVICES
CP30BL – 3-METER PASSIVE IMPACT EDGE (PROFILE 30mm) – SAFETY DEVICES
CP40BL – 4-METER PASSIVE IMPACT EDGE (PROFILE 30mm) – SAFETY DEVICES
CP50BL – 5-METER PASSIVE IMPACT EDGE (PROFILE 30mm) – SAFETY DEVICES
PASSIVE IMPACT EDGE – PASSIVE AUXILIARY DEVICES FOR SWING AND SLIDING GATES
High profile 70mm / low 30mm – colour black.
Low profile / high profile passive edge
Although it is not to be considered a safeties devices due to the absence of an electrical contact.
he passive edge has the same dimensions and mechanical protective characteristics as
the active safety edge and does supply valid absorption protection against impact. The
low profile edge, which works as simple impact protection, is suitable for closing
devices where passing room is limited.€39,00 – €63,00 + TAXCP30BL – PASSIVE IMPACT EDGE
€39,00 – €63,00 + TAX -
DKSTPT – TRANSPONDER
DKSTPT – TRANSPONDER READER
DKSTPT – TRANSPONDER READER
The DKSTPT transponder reader is Surface-mounting IP57.
Using dip-switch settings it is possible to program the backlighting and other
operational parameters. It is suitable for connection with the DKS security system
via a shielded unipolar wire carrying both the power supply and the data line. Allows
the interface to be activated by proximity reading an S500 transmitter, a TAG or a
CARD. It is also fitted with auxiliary serial line allowing it to connect to the CARHF2
system (consult the Liberté catalogue).€57,00 + TAXDKSTPT – TRANSPONDER
€57,00 + TAX