General automation accessories

  • DKSTPM – KIT TRANSPONDER IN ZAMA + INTERFACE

    DKSTPM – KIT TRANSPONDER IN ZAMA + INTERFACE

    DKSTPM       – TRANSPONDER IN ZAMA + INTERFACE KIT consists of two products:
    DKSTPMT     – TRANSPONDER IN ZAMA READER
    DKS1000R     – 4CH INTERFACE

    DKSTPMT – TRANSPONDER IN ZAMA READER
    Surface-mounting IP57.
    Using dip-switch settings it is possible to program the backlighting and other
    operational parameters. It is suitable for connection with the DKS security system
    via a shielded unipolar wire carrying both the power supply and the data line. Allows
    the interface to be activated by proximity reading an S500 transmitter, a TAG or a
    CARD. It is also fitted with auxiliary serial line allowing it to connect to the CARHF4G
    system .

    DKS1000R – 4 CHANNEL INTERFACE
    The interface box is easy to install and has the following features:
    – power supply 12 or 24Vac-dc;
    – 4 normally open relays (one for each channel);
    – management of up to 3 peripheral devices (keypads and/or transponder readers;
    – 1 multifunction key for the following functions: storing a code, cancelling a code,
    cancelling the entire memory content, inserting an activation code for the “remote
    memorisation” function. It is possible to store 1000 codes in memory with
    a maximum of 6 digits for each code. Each code can activate up to 4 channels
    (different functions).

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

  • DKSTPMT – TRANSPONDER IN ZAMAK CASE

    DKSTPMT – TRANSPONDER READER IN ZAMAK CASE

    DKSTPMT – TRANSPONDER READER  IN ZAMAK CASE
    TRANSPONDER READER Surface-mounting IP57.
    Using dip-switch settings it is possible to program the backlighting and other
    operational parameters. It is suitable for connection with the DKS security system
    via a shielded unipolar wire carrying both the power supply and the data line. Allows
    the interface to be activated by proximity reading an S500 transmitter, a TAG or a
    CARD. It is also fitted with auxiliary serial line allowing it to connect to the CARHF4G
    system.

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

  • DKSTPT – TRANSPONDER

    DKSTPT – TRANSPONDER READER

    DKSTPT – TRANSPONDER READER IS IN PHASE OUT
    REPLACED WITH : DKSTPMT -TRASPONDER READER IN ZAMAK CASE

    DKSTPT – TRANSPONDER READER
    The DKSTPT transponder reader is Surface-mounting IP57.
    Using dip-switch settings it is possible to program the backlighting and other
    operational parameters. It is suitable for connection with the DKS security system
    via a shielded unipolar wire carrying both the power supply and the data line. Allows
    the interface to be activated by proximity reading an S500 transmitter, a TAG or a
    CARD. It is also fitted with auxiliary serial line allowing it to connect to the CARHF2
    system (consult the Liberté catalogue).

    DKSTPT – TRANSPONDER

    57,00 + TAX
  • HOT

    HOT

    HOT – Electronic heater with temperature probe for 230V EVO2000 EVO2000T motors.
    All the EVO series and for sliding gate motors.

    HOT

    48,00 + TAX
  • METALD3 – SELF-CALIBRATING METAL DETECTOR 24V

    METALD3 – SELF-CALIBRATING METALLIC MASS DETECTOR 24V

    METALD3 – SELF-CALIBRATION METAL  DETECTOR OR METALLIC MASS DETECTOR 24V
    Power supply::                       24Vac-dc 100mA
    Sensitivity:                            4 levels
    Relay output:                         3 (max 1A 30V)
    Operating temperature range: -20°…+55°C
    Protection grade:                   IP40
    Overall dimensions:               146 x 64 x 38..

    DOUBLE RELAY WITH SERIAL EXCHANGE NO-NC
    SENSITIVITY SELECTOR H-M-L AND RESET BUTTON
    UNDECAL CONNECTION FOR DIN RAIL GUIDE
    RAIL GUIDE SOCKET DIN 46277
    SENSITIVITY SELECTION DIP-SWITCHES

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

  • METALDEC024X – SELF-CALIBRATING METAL DETECTOR 24V

    METALDEC024X – SELF-CALIBRATING METAL DETECTOR 24V

    METALDEC024X – SELF-CALIBRATION METALLIC MASS DETECTOR 24V MOUNTING ON DIN RAIL
    Power supply::                       24Vac-dc 100mA
    Sensitivity:                            8 levels
    Relay output:                         2 (max 1A 30V)
    Operating temperature range: -20°…+55°C
    Protection grade:                   IP40
    Overall dimensions:               101 x 71 x 35.

    DOUBLE RELAY WITH SERIAL EXCHANGE NO-NC
    SENSITIVITY SELECTOR H-M-L AND RESET BUTTON
    UNDECAL CONNECTION FOR DIN RAIL GUIDE
    RAIL GUIDE SOCKET DIN 46277
    SENSITIVITY SELECTION DIP-SWITCHES

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

  • METALDEC230X – SELF-CALIBRATING METAL DETECTOR 230V

    METALDEC230X – SELF-CALIBRATING METAL DETECTOR 230V

    METALDEC230X – SELF-CALIBRATION METAL  DETECTOR METALLIC MASS DETECTOR 230V MOUNTING ON DIN RAIL
    Power supply::                       230Vac (50-60Hz) 35mA
    Sensitivity:                            8 levels
    Relay output:                         2 (max 1A 30V)
    Operating temperature range: -20°…+55°C
    Protection grade:                   IP40
    Overall dimensions:               101 x 71 x 35.

    DOUBLE RELAY WITH SERIAL EXCHANGE NO-NC
    SENSITIVITY SELECTOR H-M-L AND RESET BUTTON
    UNDECAL CONNECTION FOR DIN RAIL GUIDE
    RAIL GUIDE SOCKET DIN 46277
    SENSITIVITY SELECTION DIP-SWITCHES

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

  • NC8K2L16N – MECHANICAL EDGE CONTACT N.C.

    NC8K2L16N – MECHANICAL EDGE CONTACT N.C.

    NC8K2L16N –  MECHANICAL EDGE N.C. CONTACT (L. 1,6m) – SAFETY DEVICE
    NC8K2L20N – MECHANICAL EDGE N.C. CONTACT (L. 2.0m) – SAFETY DEVICE
    NC8K2L25N – MECHANICAL EDGE N.C. CONTACT (L. 2,5m) – SAFETY DEVICE
    NC8K2L30N – MECHANICAL EDGE N.C. CONTACT (L. 3.0m) – SAFETY DEVICE

    MECHANICAL SAFETY AUXILIARY DEVICES FOR SWING / SLIDING GATES
    61mm high profile – N.C. contact output – black colour.

    Active mechanical safety edge with an N.C. contact for sliding gates / swing gates

    The mechanical safety edge is used as a safety device in installations with automatic sliding gates with
    horizontal movement and on other closing device installations (hinged gates etc.), where there is a real
    risk of crushing or trapping.
    Operation of the device is guaranteed by 2 micro-switches. Both of them intervene when the safety
    edge and/or the pliable end caps are deformed.

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

    54,0082,00 + TAX

    NC8K2L16N – MECHANICAL EDGE CONTACT N.C.

    54,0082,00 + TAX
  • RVS

    RVS – SPEED CONTROLLER

    RVS – SPEED CONTROLLER
    Speed ​​regulator for sliding gates.
    The device must be fixed on the rack in axis with the motor.
    The device is useful in order to recover the correct sliding of the gate on systems with slight defects addiction.

    RVS

    321,00 + TAX
  • SAFEDECX4 – STATIONARY TRANSCEIVER UNIT

    SAFEDECX4 – STATIONARY TRANSCEIVER UNIT INTERFACE 433MHz

    SAFEDECX4 – STATIONARY TRANSCEIVER UNIT INTERFACE FOR SENSITIVE EDGE PHOTOCELLS OR GENERAL DEVICES 433MHz
    Power supply 12/24Vac-dc.
    Maximum radio signal range 30m.
    8 safety devices.
    3 safety outputs NC/8.2kΩ.
    Shockproof case IP65.
    ROLLING CODE FM RADIO system. transmission frequency: 433MHz

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

  • SAFEDECX8 – STATIONARY TRANSCEIVER UNIT

    SAFEDECX8 – STATIONARY TRANSCEIVER UNIT INTERFACE 868MHz

    SAFEDECX8 – STATIONARY TRANSCEIVER UNIT INTERFACE FOR SENSITIVE EDGE PHOTOCELLS OR GENERAL DEVICES 868MHz
    Power supply 12/24Vac-dc.
    Maximum radio signal range 30m.
    8 safety devices.
    3 safety outputs NC/8.2kΩ.
    Shockproof case IP65.
    ROLLING CODE FM RADIO system. transmission frequency: 868MHz

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

  • SAFEKIT4 – KIT STATIONARY UNIT + SAFETY EDGE INTERFACE

    SAFEKIT4 – KIT STATIONARY UNIT + SAFETY EDGE INTERFACE 433MHz

    SAFEKIT4 – KIT SAFETY EDGE INTERFACE + STATIONARY TRANSCEIVER UNIT INTERFACE FOR SENSITIVE EDGE 433MHz
    SAFEPRC4 – SAFETY EDGE TRANSCEIVER INTERFACE
    SAFEDECX4 – STATIONARY TRANSCEIVER UNIT
    ROLLING CODE FM RADIO system. transmission frequency: 433MHz

    SAFETY EDGE TRANSCEIVER INTERFACE
    3V lithium battery power supply.
    Safety edge signal input NC/8.2kΩ.
    Maximum radio signal range 30m.
    Shockproof case IP65.

    STATIONARY TRANSCEIVER UNIT
    Power supply 12/24Vac-dc.
    Maximum radio signal range 30m.
    8 safety devices.
    3 safety outputs NC/8.2kΩ.
    Shockproof case IP65.

    If you are an electrician or automation specialist, call +39.0558778855
    or write an email to: commerciale@automazione-cancelli.net
    to get a quote/offer and an extra discount

Main Menu