CARDIN brand – All products are Cardin

  • CP30BL – PASSIVE IMPACT EDGE

    CP30BL – PASSIVE IMPACT EDGE

    BP20BL – 2-METER PASSIVE IMPACT EDGE (PROFILE 70mm) – SAFETY DEVICES
    CP30BL – 3-METER PASSIVE IMPACT EDGE (PROFILE 30mm) – SAFETY DEVICES
    CP40BL – 4-METER PASSIVE IMPACT EDGE (PROFILE 30mm) – SAFETY DEVICES
    CP50BL – 5-METER PASSIVE IMPACT EDGE (PROFILE 30mm) – SAFETY DEVICES

    PASSIVE IMPACT EDGE  – PASSIVE AUXILIARY DEVICES FOR SWING AND SLIDING GATES
    High profile 70mm / low 30mm – colour black.

    Low profile / high profile passive edge

    Although it is not to be considered a safeties devices due to the absence of an electrical contact.
    he passive edge has the same dimensions and mechanical protective characteristics as
    the active safety edge and does supply valid absorption protection against impact. The
    low profile edge, which works as simple impact protection, is suitable for closing
    devices where passing room is limited.

    39,0063,00 + TAX

    CP30BL – PASSIVE IMPACT EDGE

    39,0063,00 + TAX
  • SEL120D

    COLUMN SEL120D

    Column in anodized aluminum 120 cm high,
    for two modules for photocell devices and outdoor or recessed selectors.

    Pack of 1 pc.

    SELFIX
    Fixing kit for SEL50 SEL120 SEL120D columns.

    SEL120D

    43,00 + TAX
  • VEDO180PRO

    VEDO180PRO PHOTOCELL

    VEDO180PRO PHOTOCELL
    Photocell VEDO180 PRO programmable infrared photocell. Ideal for complex installations, up to 8 couples of photocells thanks to
    new synchronised system. Infrared beam could be regulated horizontally over 180°.
    The particular selfcentering lent corrects mistakes also vertically. Supply can be at 24V alternating voltage
    or continue, without polarity refer.
    Range 25m.

    VEDO180PRO

    43,00 + TAX
  • ILBSINCRO

    ILBSINCRO PHOTOCELL

    ILBSINCRO PHOTOCELL
    Programmable infrared photocell.
    ILB SINCRO photocell is Ideal for complex systems with up to 8 pairs of photocells thanks to the new synchronism system.
    The power supply can be 24V alternating or direct, without polarity references.

    PHOTOCELL ILB SINCRO
    Pair of synchronized flush mounted photocells with adjustable optics.
    Range 50 m.

    ILBSINCRO

    42,00 + TAX
  • CDR841E00 – PHOTOCELL

    CDR841E00 – PHOTOCELL WITH  SURFACE MOUNT CASE
    IP55 RANGE 15M

    CDR841E00 PHOTOCELL – PHOTOELECTRIC OR PHOTOCELLS IN A SHOCKPROOF CASE IP55
    Maximum range 15m – 60m
    Power supply 12/24Vac-dc
    Protection grade IP55
    Transmitter and receiver housed in a waterproof plastic case.
    Double-relay with serial exchange.
    Sensitivity adjustment trimmer located on the receiver (only
    CDR851).

    CDR841E00 PHOTOCELL – SURFACE-MOUNT PHOTOELECTRIC CELLS, RANGE MAX. 15m
    The kit contains a pair of surface-mount photoelectric cells, 2 lens
    covers for surface-mount photocells and 2 fast-fitting wall brackets

    CDR841E00 – PHOTOCELL

    43,00 + TAX
  • RQM504C2

    RQM504C2 – 433MHz STANDARD MIN 2-CHANNEL RECEIVER IN BOX (12 / 24Vac-dc).

    RQM504C2 – 433MHz STANDARD INDOOR MINI 2-CHANNEL RECEIVER IN BOX (12 / 24Vac-dc).
    The unit RQM504C2 is an electronic circuit with a 10-way terminal block; Fitted with 2 relay
    channels which can be set to ON/OFF or impulsive.
    Possibility of memorising up to 1000 codes.

    ABS indoor enclosure – IP20.
    Overall dimensions(mm) 95 x 75 x 25.

    51,0059,00 + TAX

    RQM504C2

    51,0059,00 + TAX
  • CDR841I00 – PHOTOCELLS

    CDR841I00 – PHOTOCELL WITH  SHOCKPROOF CASE
    IP55 RANGE 15M

    CDR841I00 PHOTOCELL – PHOTOELECTRIC OR PHOTOCELLS
    IN A SHOCKPROOF CASE IP55 15M RANGE

    Maximum range 15m – 60m
    Power supply 12/24Vac-dc
    Protection grade IP55
    Transmitter and receiver housed in a waterproof plastic case.
    Double-relay with serial exchange.
    Sensitivity adjustment trimmer located on the receiver (only
    CDR851).

    CDR841I00 PHOTOCELL – FLUSH-FITTING PHOTOELECTRIC CELLS, RANGE 15m
    The kit contains a pair of flush-fitting photoelectric cells and 2 lens
    covers for flush-fitting photocells.

    CDR841I00 – PHOTOCELLS

    46,00 + TAX
  • FTR893C3 – MINI PHOTOCELL

    FTR893C3 / FTR 893C3 – MINI PHOTOCELL
    WITH 
    SURFACE MOUNT CASE IP55

    FTR 893C3 / FTR893C3 PHOTOCELL – PHOTOELECTRIC OR PHOTOCELLS IN A SHOCKPROOF CASE IP55

    FTR893C3 / FTR 893C3 DOUBLE-RELAY PHOTOELECTRIC PHOTOCELLS
    Power supply 12/24Vac-dc.
    Range: 2,5m indoors.
    Transmitter cable 4 metres – Receiver cable 4 metres.

    SINGLE-BEAM INFRARED BARRIER PHOTOELECTRIC PHOTOCELLS
    Overall dimensions 90 x 50 x 20.

  • RQM504C1

    RQM504C2 – 433MHz STANDARD MIN 2-CHANNEL RECEIVER IN BOX (12 / 24Vac-dc).

    RQM504C2 – 433MHz STANDARD INDOOR MINI 2-CHANNEL RECEIVER IN BOX (12 / 24Vac-dc).
    The unit RQM504C2 is an electronic circuit with a 10-way terminal block; Fitted with 2 relay
    channels which can be set to ON/OFF or impulsive.
    Possibility of memorising up to 1000 codes.

    ABS indoor enclosure – IP20.
    Overall dimensions(mm) 95 x 75 x 25.

    RQM504C1

    51,00 + TAX
  • EDGETAXI

    EDGETAXI / EDGE TAXI –  REMOTE RADIO CONTROL TRASMITTER 433,92 MHz

    EDGE TAXI REMOTE RADIO CONTROL 433,92 MHz
    EDGE TAXI 5 channels transmitter specially designed to be installed in the car.
    The code transmission is repeated cyclically and autonomously.
    Automatically repeats the radio signal improving convenience and safety for the driver.
    The EDGETAXI remote radio control combines the simplicity of the fixed code with an excellent radio range at 433.92 MHz.
    Same refined container as the multichannel EDGE20  but with dedicated software for use in the car.
    By briefly pressing one of the keys of the Taxi remote control.
    In this way we add convenience and safety for those who drive the car.
    A convenient self-adhesive fixing system is supplied to have the remote control always at hand.

    EDGETAXI

    57,00 + TAX
  • RQM508C1

    RQM508C1 – 868MHz STANDARD MIN 1-CHANNEL RECEIVER IN BOX (12 / 24Vac-dc).

    RQM508C1 – 868MHz STANDARD INDOOR MINI 1-CHANNEL RECEIVER IN BOX (12 / 24Vac-dc).
    The unit RQM504C2 is an electronic circuit with a 7-way terminal block; Fitted with 1 relay
    channels which can be set to ON/OFF or impulsive.
    Possibility of memorising up to 1000 codes.

    ABS indoor enclosure – IP20.
    Overall dimensions(mm) 80 x 50 x 22.

    RQM508C1

    52,00 + TAX
  • RSQ504C2

    RSQ504C2 – 433MHz 2-CHANNEL SLOT-IN RECEIVER CARD (12 / 24Vac-dc).

    RSQ504C2 – 433MHz 2-CHANNEL SLOT-IN RECEIVER CARD (12 / 24Vac-dc).
    The unit RSQ504C2 Receiver card for direct insertion into a host appliance designed to
    receive it. Fitted with 2 relay channels which can be set to ON/OFF or
    impulsive.
    Possibility of memorising up to 1000 codes.

    Overall dimensions(mm) 95 x 75 x 25.

    RSQ504C2

    55,00 + TAX

Main Menu