Automation accessories: columns, photocells, flashing selectors, safety accessories
-
DKSTPM – KIT TRANSPONDER IN ZAMA + INTERFACE
DKS1000T – KEYPAD WITH BACKLIGHTING
DKS1000T – KEYPAD WITH BACKLIGHTING
Surface-mounting IP57.
The metal antitamper keyboard DKS1000T has 12 keys, 10 numerical (0-9), one
confirm key (*) and one cancel key (#) by means of which it is possible to program
the backlighting and other operational parameters. It is suitable for connection with
the DKS security system via a shielded unipolar wire carrying both the power supply
and the data line. It is also fitted with auxiliary serial line allowing it to connect to the
CARHF2 system (consult the Liberté catalogue).€89,00 + TAXDKSTPM – KIT TRANSPONDER IN ZAMA + INTERFACE
€89,00 + TAX -
DKSDUALT – KEYPAD WITH TRANSPONDER
DKSDUALT – KEYPAD WITH TRANSPONDER
DKSDUALT – KEYPAD WITH TRANSPONDER FUNCTION
The DKSDUALT – KEYPAD WITH TRANSPONDER is Surface-mounting IP57.
The DKSDUALT device has the following features:
– 12 keys with backlighting;
– backlighting controlled by the proximity sensor.
Allows the interface to be activated by either typing in a code or by proximity
reading an S500 transmitter, a TAG or a CARD.€91,00 + TAXDKSDUALT – KEYPAD WITH TRANSPONDER
€91,00 + TAX -
CDRX12 PHOTOCELL
CDRX12 – PHOTOCELL WITH SURFACE MOUNT CASE
IP55 RANGE 10MCDRX12 PHOTOCELL – PHOTOELECTRIC OR PHOTOCELLS IN A SHOCKPROOF CASE IP55
CDRX12 – HYBRID INFRARED BARRIERS PHOTOCELLS WITH ADJUSTABLE LENSES
RECEIVER POWER SUPPLY 12/24Vac-dc
PROJECTOR POWER SUPPLY 3V WITH A LITHIUM BATTERY
MAXIMUM RANGE 10m
PROTECTION GRADE IP55CDRX12 PHOTOCELLS are a next generation infrared safety system, particularly suited to the protection of passageways (traffic
and pedestrian) that are fitted with automatic opening and closing systems. The electronic circuit respects the
most up to date standards and regulations and conforms to the standard 3 of the UNI EN 13849-1 (update of the
EN954-1). It is possible to connect up to 3 pairs of photocells and synchronise the transmission (multiplex system).
The necessity of guaranteeing greater ambient noise immunity has led to the evolution of both the transmitter and
receiver cards. The system is based on the criteria “resistance to single failure” that guarantees the maintenance of
safety in case of electrical problems.
The receiver should be installed close to the electronic programmer and wired up drawing its 12/24V power supply
directly from the programmer while the projector can be installed on any surface and doesn’t require wiring. Power
is supplied by a solar panel when light is present and by a 3V lithium battery when insufficient light is available.
The batteries lifespan can be optimised by setting the energy saving function and varying the cut-in time and the
installation distance between the two photoelectric cells.€96,00 + TAXCDRX12 PHOTOCELL
€96,00 + TAX -
CDR892C3-1 MINI PHOTOCELL
CDR892C3-1 / CDR 892C3-1 – MINI PHOTOCELL
WITH SURFACE MOUNT CASE IP55 RANGE 15MCDR 892C3-1 / CDR892C3-1 PHOTOCELL – PHOTOELECTRIC OR PHOTOCELLS IN A SHOCKPROOF CASE IP55
CDR892C3-1 / CDR 892C3-1 DOUBLE-RELAY PHOTOELECTRIC PHOTOCELLS
Power supply 12/24Vac-dc.
Range: 15m indoors – 10m outdoors.
Transmitter cable 10 metres – Receiver cable 7 metres.DUAL-BEAM MULTIPLEX INFRARED BARRIER
Overall dimensions 90 x 50 x 20.€96,00 + TAXCDR892C3-1 MINI PHOTOCELL
€96,00 + TAX -
SRCKIT8 – KIT BI-CHANNEL UNIT + SAFETY EDGE INTERFACE
SRCKIT8E / SRCKIT4E – KIT SAFETY EDGE + INTERFACE + STATIONARY UNIT BI-CHANNEL 868MHz / 433MHz
SRCKIT8E / SRCKIT8 – KIT SAFETY EDGE INTERFACE + BI-CHANNEL STATIONARY TRANSCEIVER UNIT 868MHz
SRCRX8E / SRCTXE – SAFETY EDGE TRANSCEIVER INTERFACE
SRCTX8E / SRCRXE – BI-CHANNEL STATIONARY TRANSCEIVER UNIT
ROLLING CODE FM RADIO system. transmission frequency: 868MHz
SRCKIT4E – KIT SAFETY EDGE INTERFACE + BI-CHANNEL STATIONARY TRANSCEIVER UNIT 433MHz
SRCRX4E – SAFETY EDGE TRANSCEIVER INTERFACE
SRCTX4E – BI-CHANNEL STATIONARY TRANSCEIVER UNIT
ROLLING CODE FM RADIO system. transmission frequency: 868MHzSRCTX8E / SRCTX4E / SRCTXE – SAFETY EDGE TRANSCEIVER INTERFACE
Power supply 2 alkaline or lithium AA batteries.
Safety edge signal input NC/8.2kΩ.
Maximum radio signal range 20m.
Shockproof case IP65.SRCTX8E / SRCTX4E / SRCRXE – BI-CHANNEL STATIONARY TRANSCEIVER UNIT
Power supply 12/24Vac-dc.
Maximum radio signal range 20m.
8 safety devices – 2 safety outputs NC/8.2kΩ.
Shockproof case IP65.Before ordering, choose the frequency you want to purchase: 433MHz or 868MHz
€99,00 + TAX -
CDR973AX PHOTOCELL
CDR973AX – SURFACE MOUNTED PHOTOCELL WITH IP66 SHOCKPROOF CASE 15M RANGE
CDR973AX – PHOTOELECTRIC CELLS IN AN ALUMINIUM CASE IP66
Maximum range 15m
Power supply 12/24Vac-dc
Protection grade IP66
Transmitter and receiver housed in a compact waterproof aluminium
case. Highly resistant spray painting. Self locking adjustable lens
which can be rotated horizontally through plus or minus 90° and
vertically through plus or minus 30° with respect to the standard
installation position.
It is possible to connect up to 3 pairs of photocells and synchronize
the transmission (multiplex system).CDR973AX – SURFACE-MOUNT PHOTOELECTRIC CELL
The kit contains a pair of aluminium photoelectric cells with two
pipe glands.€102,00 + TAXCDR973AX PHOTOCELL
€102,00 + TAX -
CDR892C3-2 MINI PHOTOCELL
CDR892C3-2 / CDR 892C3-2 – MINI PHOTOCELL
WITH SURFACE MOUNT CASE IP55 RANGE 15MCDR 892C3-2 / CDR892C3-2 PHOTOCELL – PHOTOELECTRIC OR PHOTOCELLS IN A SHOCKPROOF CASE IP55
CDR892C3-2 / CDR 892C3-2 DOUBLE-RELAY PHOTOELECTRIC PHOTOCELLS
Power supply 12/24Vac-dc.
Range: 15m indoors – 10m outdoors.
Transmitter cable 15 metres – Receiver cable 10 metres.DUAL-BEAM MULTIPLEX INFRARED BARRIER
Overall dimensions 90 x 50 x 20.€102,00 + TAXCDR892C3-2 MINI PHOTOCELL
€102,00 + TAX -
CDR852A – PHOTOCELL
CDR852A – PHOTOCELL WITH SURFACE CONTAINER SHOCKPROOF IP66 RANGE 60M
CDR852A PHOTOCELL – PHOTOELECTRIC CELLS IN AN ALUMINIUM CASE IP66
Maximum range 15m – 60m
Power supply 12/24Vac-dc
Protection grade IP66
Transmitter and receiver housed in a compact waterproof aluminium
case. Highly resistant spray painting.
Double-relay with serial exchange.
Sensitivity adjustment trimmer located on the receiver (only
CDR852A).CDR852A PHOTOCELL – SURFACE-MOUNT PHOTOELECTRIC CELLS, RANGE 60m
The kit contains a pair of photoelectric cells with two pipe glands.€103,00 + TAXCDR852A – PHOTOCELL
€103,00 + TAX -
CK160
CK 160 / CK160 – SENSITIVE EDGE CK160 / CK 160
CK 160 / CK160 – SENSITIVE EDGE CK160 / CK 160
CK200 Resistive sensitive safty edge, according to the European standard EN 12978.The CK 160 has To be installed with CSSENSOR electronic card.
length 160 cm, without caps.It is replaced by the new sensitive coasts:
MECHANICAL ACCESSORIES – SENSITIVE SAFTY EDGE ( RIBS) CARDIN with CODES:
NC8K2Lxxx
BBASLxxN
CPxxBL
BSHxxLxx -
DKS1000 – KIT KEYPAD + ITERFACE 4CH
DKS1000 – KEYBOARD + INTERFACE KIT
DKS1000 – KEYBOARD + INTERFACE KIT consists of two products:
DKS1000T – BACKLIT KEYBOARD
DKS1000R – 4CH INTERFACEDKS1000T – KEYPAD WITH BACKLIGHTING
Surface-mounting IP57.
The metal antitamper keyboard DKS1000T has 12 keys, 10 numerical (0-9), one
confirm key (*) and one cancel key (#) by means of which it is possible to program
the backlighting and other operational parameters.
DKS1000R – 4 CHANNEL INTERFACE
The interface box is easy to install and has the following features:
– power supply 12 or 24Vac-dc;
– 4 normally open relays (one for each channel);
– management of up to 3 peripheral devices (keypads and/or transponder readers;
– 1 multifunction key for the following functions: storing a code, cancelling a code,
cancelling the entire memory content, inserting an activation code for the “remote
memorisation” function. It is possible to store 1000 codes in memory with
a maximum of 6 digits for each code. Each code can activate up to 4 channels
(different functions).€106,00 + TAXDKS1000 – KIT KEYPAD + ITERFACE 4CH
€106,00 + TAX -
CK200
CK 200 / CK 200 – SENSITIVE EDGE CK200 / CK 200
CK 200 / CK 200 – SENSITIVE EDGE CK200 / CK 200
CK200 Resistive sensitive safty edge, according to the European standard EN 12978.The CK200 has To be installed with CSSENSOR electronic card.
length 200 cm, without caps.It is replaced by the new sensitive coasts:
MECHANICAL ACCESSORIES – SENSITIVE SAFTY EDGE ( RIBS) CARDIN with CODES:
NC8K2Lxxx
BBASLxxN
CPxxBL
BSHxxLxx -
METALD3 – SELF-CALIBRATING METAL DETECTOR 24V
METALD3 – SELF-CALIBRATING METALLIC MASS DETECTOR 24V
METALD3 – SELF-CALIBRATION METAL DETECTOR OR METALLIC MASS DETECTOR 24V
Power supply:: 24Vac-dc 100mA
Sensitivity: 4 levels
Relay output: 3 (max 1A 30V)
Operating temperature range: -20°…+55°C
Protection grade: IP40
Overall dimensions: 146 x 64 x 38..DOUBLE RELAY WITH SERIAL EXCHANGE NO-NC
SENSITIVITY SELECTOR H-M-L AND RESET BUTTON
UNDECAL CONNECTION FOR DIN RAIL GUIDE
RAIL GUIDE SOCKET DIN 46277
SENSITIVITY SELECTION DIP-SWITCHES€114,00 + TAXMETALD3 – SELF-CALIBRATING METAL DETECTOR 24V
€114,00 + TAX